Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Nickel-oxide multiwall carbon-nanotube/reduced graphene oxide a ternary composite for enzyme-free glucose sensing(Royal Society of Chemistry, 2016) Prasad, R.; Ganesh, V.; Badekai Ramachandra, B.R.We report a solvent-free method of preparation for a NiO-carbon nanotube/graphene ternary composite using nickel formate as a green precursor via a thermal decomposition method. In this ternary composite, NiO with an average particle size of 7 nm is regularly decorated on the surfaces of conductive carbon matrix networks such as MWCNTs and reduced graphene oxide (rGO). Here rGO serves as an ideal support for the uniform distribution of NiO nanoparticles and also functions as an efficient transducer material, whereas, MWCNTs act as a spacer between rGO, which enhances the electrical conductivity and accessibility of the active reaction sites for direct glucose oxidation. The electrochemical performances were evaluated by cyclic voltammetry and amperometric techniques. Under the optimal conditions, the 20 wt% NiO-MWCNT/rGO/GCE exhibits a sensitivity of 4223.3 ?A cm-2 mM-1 and a detection limit of 0.92 ?M over a linear glucose concentration range up to 19 mM. Furthermore, the constructed sensor is effectively employed to detect glucose in real human blood serum samples with adequate results. The modified 20 wt% NiO-MWCNT/rGO/GCE also shows a high sensitivity, greater selectivity, excellent reproducibility and long-term stability. © 2016 The Royal Society of Chemistry.Item Fabrication and performance evaluation of hybrid supercapacitor electrodes based on carbon nanotubes and sputtered TiO2(Institute of Physics Publishing michael.roberts@iop.org, 2016) Aravinda, L.S.; Nagaraja, K.K.; Nagaraja, H.S.; Bhat, K.U.; Badekai Ramachandra, B.R.We report a simple and eco-friendly method for the fabrication of a titanium dioxide/functionalized multiwalled carbon nanotube (TiO2/FMWCNT) composite electrode for use in supercapacitors. The nanocomposite electrodes were formed by depositing titanium dioxide onto FMWCNTs using reactive magnetron sputtering, thus providing a green roue for the formation of the binder-free composite electrode. It is shown that the electrochemical performance of the fabricated electrodes can be altered by tuning the thickness of the titanium dioxide overlayer. The integrated nanocomposite electrode showed an improved specific capacitance of 90 Fg-1 in two-electrode configuration. © 2016 IOP Publishing Ltd.Item Impact of electrolyte concentration on electrochemical performance of Cocos nucifera Waste-Derived High-Surface carbon for green energy storage(Elsevier Ltd, 2024) Hegde, S.S.; Badekai Ramachandra, B.R.The increasing popularity of utilizing biomass's natural structure represents a promising avenue for sustainable innovation, as it taps into the inherent characteristics of organic materials to address various environmental and industrial challenges. Researchers and industries continue to explore the full potential of biomass in creating more sustainable and efficient solutions. The transformation of biomass into carbon materials is an indirect means of utilizing CO2 as a carbon source, thus contributing to the sustainable development of energy storage technologies and also in pollution reduction. In the quest for sustainable energy solutions, this research unveils a cost-effective approach to supercapacitor development by harnessing the untapped potential of Cocos nucifera trunk sawdust-derived high-surface carbon (CHSC). Through a meticulous process involving ZnCl2 treatment and KOH activation at varying temperatures, CHSC-700 emerges as a standout electrode material with exceptional structural characteristics, boasting enhanced graphitization and a specific surface area of 1153.72 m2/g. Further, the study delved into the nuanced relationship between electrolyte concentration and supercapacitor performance, pinpointing 6 M KOH as the optimal condition. In 6 M KOH, the electrode exhibits a maximum specific capacitance of 559.27F/g at the current density of 0.5 A/g with outstanding cyclic stability, retaining 80.37 % capacitance after 20,000 cycles and an impressive energy density of 18.92 Wh/kg and power density of 246.75 W/kg. This systematic exploration provides valuable data for understanding the biomass-derived carbon electrode's behaviour under various electrolyte concentrations, offering crucial information for optimizing its performance in practical applications, such as energy storage devices. © 2024 Elsevier LtdItem Electrochemical performance and structural evolution of spray pyrolyzed Mn3O4 thin films in different aqueous electrolytes: effect of anions and cations(Royal Society of Chemistry, 2024) Adoor, P.; Hegde, S.S.; Badekai Ramachandra, B.R.; George, S.D.; Raviprakash, R.This work presents the impact of cycling in different cationic and anionic aqueous electrolytes on the electrochemical storage performance of the Mn3O4 thin film electrode prepared using the chemical pyrolysis method. Studies on the as-deposited electrode confirmed the formation of Mn3O4 phase. Extensive electrochemical analysis was performed using Na2SO4, NaCl, Li2SO4, K2SO4, and MgSO4 electrolytes to examine the influence of cations and anions on charge storage behaviour. Considerable changes were observed in the specific capacitances owing to different ionic sizes as well as hydrated ionic radius of the electrolyte ions. Accordingly, the electrode unveiled a good performance showing a specific capacitance of around 187 F g−1 at 0.5 A g−1 in K2SO4 electrolyte. Further, the electrode properties are examined after 500 CV cycles to trace the changes in the structural and morphological properties. X-ray diffraction (XRD) and Raman spectroscopic studies illustrate a partial phase transformation of electrodes from Mn3O4 to MnO2 irrespective of the electrolytes. These results are further corroborated with X-ray photoelectron spectroscopic (XPS) analysis where there was an increment in the oxidation state of manganese. It has been observed that the surface properties were significantly changed with cycling, as manifested by the wettability studies of the electrodes. The obtained results brings out the significance of electrolyte ions on the charge storage characteristics of Mn3O4 thin film electrodes in light of their possible application in electrochemical capacitors. © 2024 The Royal Society of Chemistry.Item Unveiling the mass-loading effect on the electrochemical performance of Mn3O4 thin film electrodes: a combined computational and experimental study(Institute of Physics, 2024) Pramitha, A.; Hegde, S.S.; Badekai Ramachandra, B.R.; Yadav K, C.; Chakraborty, S.; Ravikumar, A.; George, S.D.; Sudhakar, Y.N.; Raviprakash, Y.The remarkable storage performance of manganese oxide (Mn3O4) makes it an appealing option for use as electrodes in electrochemical capacitors. However, the storage kinetics were significantly influenced by the mass loading of the electrode. Herein, we have inspected the dependency of mass loading on the storage performance of the spray pyrolyzed Mn3O4 thin film electrodes along with the correlation of structural and morphological characteristics. X-ray diffraction and Raman spectroscopic studies proven the formation of spinel Mn3O4 with a tetragonal structure. Morphological analysis revealed that all films exhibited fibrous structures with interconnected patterns at higher mass loadings. Moreover, the surface roughness and wettability of the electrode surface were influenced by variations in mass loading. Notably, thin-film electrode with a mass loading of 0.4 mg cm?2 exhibited the highest specific capacitance value of 168 F g?1 at 5 mV s?1 in a three-electrode system. Further, electrochemical impedance spectroscopic studies showed that there were noticeable changes in the capacitive behaviour of the electrode with respect to variations in mass loading. Moreover, the Dunn approach was employed to differentiate the underlying storage mechanism of the Mn3O4 electrode. Additionally, first-principles Density Functional Theory (DFT) studies were carried out in connection with the experimental study to comprehend the structure and electronic band structure of Mn3O4. This study underscores the critical importance of mass loading for enhancing the storage performance of Mn3O4 thin-film electrodes. © 2024 The Author(s). Published by IOP Publishing Ltd.