Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Polypyrrole functionalized Cobalt oxide Graphene (COPYGO) nanocomposite for the efficient removal of dyes and heavy metal pollutants from aqueous effluents(Elsevier B.V., 2021) Anuma, S.; Mishra, P.; Badekai Ramachandra, B.R.A cobalt oxide graphene nanocomposite functionalized with polypyrrole (COPYGO) having a heterogenous porous structure was synthesized using hydrothermal method. Microscopic imaging of the COPYGO surface revealed its highly porous and ordered features. The adsorption performance of the COPYGO composite was systemically investigated for Methylene Blue (MB), Congo red (CR) dyes and toxic lead (Pb(II)) and Cadmium (Cd(II)) metals. These were selected as they are the common pollutants in industrial wastewater. The COPYGO was found to be thermally stable up to 195 oC with a specific surface area of 133 m2 g?1. Experimental data indicates that the COPYGO follows Langmuir and Temkin adsorption isotherm. The COPYGO was efficient in removing MB (92.8%), CR (92.2%), Pb(II) (93.08%) and Cd(II) (95.28%) pollutants at pH 7.2, 5.0, 5.5 and 6.1 respectively from the simulated effluents. The maximum adsorption capacity (Qmax) observed for MB 663.018 mg g-1, CR 659.056 mg g-1, Pb(II) 780.363 mg g?1 and Cd(II) 794.188 mg g?1 pollutants. The thermodynamic analysis of the COPYGO indicates that the adsorption is endothermic and spontaneous in nature. COPYGO showed very high efficient removal rate for the pollutants in simulated effluents which guaranteed its benefits and efficacy in industrial wastewater treatment. © 2021 Elsevier B.V.Item Cobalt-doped LaFeO3 for photo-Fenton degradation of organic pollutants and visible-light-assisted water splitting(Springer, 2024) James, A.; Rodney, J.D.; Manojbabu, A.; Joshi, S.; Rao, L.; Badekai Ramachandra, B.R.; Udayashankar, N.K.The increasing demand for clean energy sources and the growing concerns about environmental pollution have led to a significant interest in developing efficient photocatalytic and photoelectrochemical systems. Here, we report the visible-light-induced photo-Fenton catalytic degradation of Methylene Blue (MB) dye over LaFeO3 and LaCo xFe1−xO3 (x = 0.01, 0.05, 0.1) catalysts synthesized via the facile combustion method. The LaCo0.01Fe0.99O3 has significantly enhanced the photo-Fenton catalytic efficiency of LaFeO3 from 67.75 to 93.85% for MB dye removal after 180 min of light irradiation. The rate constants calculated via the pseudo-first-order kinetics mechanism are found to be 0.00532/min for LaFeO3 and 0.01476/min for LaCo0.01Fe0.99O3, respectively. In addition, the most effective LaCo0.01Fe0.99O3 catalyst has demonstrated remarkable degradation performance towards Tetracycline (TC) and Methyl Orange (MO) dye with an efficacy of 93.81% and 69.67%, respectively, indicating its versatility. Further, the pristine and doped LaFeO3 were structurally optimized using DFT, and the computed band gaps were following the experimental data. Interestingly, the same catalyst can be employed as a light-induced electrocatalyst in addition to water treatment by taking advantage of its dual functionality. The LaCo0.01Fe0.99O3 catalyst achieved a benchmark current density of 10 mA/cm2 for H2 evolution at an overpotential of 297 mV vs. RHE which further improved to 190 mV vs. RHE under illumination. This work provides valuable insights on partial Co incorporation at the B-site of LaFeO3 for the development of visible-light-induced photocatalytic and electrocatalytic systems, which is hoped to contribute to the advancement of sustainable energy production and environmental remediation. © 2024, The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.