Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
5 results
Search Results
Item Methanol selective oxidation to formaldehyde over a modified Fe-Mo catalyst with two different stoichiometric (Mo/Fe atomic ratio = 1.5 and 3.0) was studied experimentally in a fixed bed reactor over a wide range of reaction conditions. The physicochemical characterization of the prepared catalysts provides evidence that Fe2(MoO4)3 is in fact the active phase of the catalyst. The experimental results of conversion of methanol and selectivity towards formaldehyde for various residence times were studied. The results showed that as the residence time increases the yield of formaldehyde decreases. Selectivity of formaldehyde decreases with increase in residence time. This result is attributable to subsequent oxidation of formaldehyde to carbon monoxide due to longer residence time.(Selective oxidation of methanol to formaldehyde using modified iron-molybdate catalysts) Kim, T.-H.; Badekai Ramachandra, B.; Choi, J.-S.; Saidutta, M.B.; Choo, K.-Y.; Song, S.-D.; Rhee, Y.-W.2004Item Molybdenum based mixed oxide containing Mo0.65V 0.25W0.10 was investigated for the partial oxidation of methanol. The structural property and catalytic activity of the mixed oxide catalyst was studied by surface area (BET), scanning electron microscopy (SEM), energy dispersive X-ray (EDX), Fourier transform infra-red spectroscopy (FTIR) and X-ray diffraction (XRD). The thermal activation of the catalyst resulted increase in the conversion of methanol and the selectivity to formaldehyde. The thermal activation of the MoVW mixed oxide in nitrogen atmospheres induces partial crystallization of a Mo5O14-type oxide at 813 K. The SEM images of the thermally activated catalyst show needle like particles. These particles were agglomerates of platelet-like crystallites of a few hundreds of nanometers in size. SEM and EDX techniques show that the mixed oxide is characterized by an inhomogeneous elemental distribution on the length scale of a few microns. XRD of the thermally activated catalyst showed a nanocrystalline material identified as a mixture of Mo5O 14, MoO3 and MoO2-type MoVW oxides. The catalytic activity of the MoVW mixed oxide show a good conversion of methanol and selectivity to formaldehyde. © 2005 Springer Science+Business Media, Inc.(Partial oxidation of methanol to formaldehyde on molybdenum based mixed oxide catalyst) Badekai Ramachandra, B.; Choi, J.-S.; Choo, K.-Y.; Sung, J.-S.; Song, S.-D.; Kim, T.-H.2005Item High yield synthesis of carbon nanofibers in an environmental friendly route(Springer Nature, 2011) Ravindra, R.; Badekai Ramachandra, B.An environmental friendly route for the high yield synthesis of carbon nanofibers (CNFs) has been developed. CNFs have been synthesized using nickel formate as catalyst precursor at 680°C using chemical vapor deposition method. Upon pyrolysis this catalyst precursor yields metal catalyst nanoparticles directly. The sodium chloride and potassium chloride was used as catalyst support, it was chosen because of its non-toxic and water soluble nature. The problems such as detrimental effect, environment and even cost has been avoided by using water soluble supports. The structure of the products was characterized by scanning electron microscopy, transmission electron microscopy, Raman spectroscopy and X-ray diffraction method. The purity of as grown products and purified products was determined by thermal analysis. Here, we report the 7,800 and 7,200 wt% yield of CNFs synthesized over NaCl and KCl support. This synthetic route can be used for the large scale synthesis in industries. © 2011, The Author(s).Item Green approach to synthesize multi-walled carbon nanotubes by using metal formate as catalyst precursors(2013) Rajarao, R.; Badekai Ramachandra, B.The multi-walled nanotubes (MWNTs) have been synthesized in large scale by using metal formate as catalyst precursors. The calcium carbonate is used as catalyst support, it is chosen because of its non toxic and easily soluble nature. The synthesis was carried out by chemical vapor deposition method for 15 min under optimized conditions. The products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy and X-ray diffraction (XRD) method. The purity of the as grown products and purified products were determined by thermal analysis. The obtained yield of MWNTs was about 8300 wt% relative to the nickel catalyst. This synthesis route avoids the lengthy process of calcination and reduction for the preparation of catalysts hence this method is more economical. This economical and environmental friendly synthesis route can be used for synthesizing MWNTs in large scale. Copyright © 2013 American Scientific Publishers All rights reserved.Item ZnO/carbon nanotube nanocomposite for high energy density supercapacitors(2013) Aravinda, L.S.; Nagaraja, K.K.; Nagaraja, H.S.; Bhat, K.; Badekai Ramachandra, B.A facile, green and highly efficient method for the decoration of carbon nanotubes with ZnO was developed for the fabrication of binder-free composite electrode for supercapacitor applications. The nano composite was prepared by using reactive magnetron sputtering in Ar/O2 environment. This approach leads to more uniform coating with tuneable thickness, which alters the electrochemical performance of the nano composite electrodes. The structure and surface morphology of the composite film have been studied by means of X-ray diffraction (XRD) analysis, scanning electron microscopy and field emission scanning electron microscopy (FESEM). The XRD study reveals the formation of Wurtzite ZnO structure. The electrochemical performance of nano composite electrode was investigated using cyclic voltammetry, chronopotentiometry and electrochemical impedance measurements in non-aqueous electrolyte. The nano composite electrode shows significant increase in the specific capacitance up to 48 F g-1 with an energy density 13.1 Wh kg-1 in the potential range -2 V to 1 V. © 2013 Elsevier Ltd. All rights reserved.