Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Effect of exhaust gas recirculation on a CRDI engine fueled with waste plastic oil blend(Elsevier Ltd, 2018) Ayodhya, A.S.; Lamani, V.T.; Bedar, P.; Kumar, G.N.The inevitable rise in the usage of plastic poses a serious threat to the environment owing to their non-biodegradable nature. The lack of proper infrastructure for treating and recycling plastic wastes give rise to the disposal problem. However, the oil synthesized from these waste plastics can be used as an alternative fuel for C.I engines which not only helps to tackle the disposal problem but also aids in recovering precious energy from these wastes. This experimental investigation aims to study the effects of plastic-diesel blend(P30) fuel on the performance, emission and combustion characteristics of a twin cylinder CRDI engine operating at different EGR rates (0%, 10% and 20%). The experimental results showed a slight drop in the engine performance while operating with plastic blend, mainly overall due to its higher viscosity and lower heating value. The vast upsurge of NOX emissions with plastic blend was mitigated by the aid of EGR methodology. Marginal increase in the discharge of regulated emissions like HC, CO and soot were noticed for both plastic blend as well as EGR operations. The experiments were carried out for five different loading conditions varying from 0% to 80% in steps of 20% each and found out that waste plastic-diesel blend can be successfully used as an alternative fuel in diesel vehicles without any prior modifications in the engine. © 2018 Elsevier LtdItem NOx reduction studies on a diesel engine operating on waste plastic oil blend using selective catalytic reduction technique(Elsevier B.V., 2019) Ayodhya, A.S.; Lamani, V.T.; Thirumoorthy, M.; Kumar, G.N.The constant escalation in the consumption of petroleum products has compelled researchers to discover for new alternative fuels which can be successfully incorporated in the existing automotive engines. Oil derived from waste plastics is one such alternative, which not only ensures longevity of fossil fuels but also assists in bringing down the hazardous impacts caused by the improper disposal of plastic wastes. This work focuses on the utilization of valuable energy of toxic non-biodegradable waste plastics to lucratively be used as an alternative fuel. An attempt was further made to reduce the NO X emissions which increased with the use of waste plastic oil blend. The main objective of this experimental investigation is to study the performance & emission characteristics of a twin cylinder CRDI engine subjected to selective catalytic reduction (SCR) after-treatment technique. Different flow rates of ammonia as a reducing agent were tested and concluded that a flow rate of 0.5 kg/hr furnishes optimum results. A comparison of NO X reduction efficiency was also made between SCR and EGR techniques. The comparison eventually indicated that SCR gives better NO X conversion efficiency at higher loads without any adverse effect on the engine performance while operating on Waste Plastic Oil blend (P30). © 2018 Energy Institute