Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Plasma nitriding of AISI 2205 steel: Effects of surface mechanical attrition treatment and chemical etching(Maney Publishing michael.wagreich@univie.ac.at, 2016) Gatey, A.M.; Hosmani, S.S.; Arya, S.B.; Figueroa, C.A.; Singh, R.P.In the present study, surface mechanical attrition treatment (SMAT) and plasma nitriding were conducted on AISI 2205 steel. SMAT was effective in enhancing the surface hardness of the steel by about 80%. The influence of SMAT on the corrosion behaviour of the steel was studied in a 3.5 wt-% NaCl solution. Due to the stable and thicker passive layer, improved corrosion resistance was observed for the SMATed steel. However, nitrogen diffusion during plasma nitriding was impeded by the improved passivation, especially for the lower duration (30 min) of chemical etching/cleaning (i.e. sputter cleaning in hydrogen plasma) of the specimen's surface. Furthermore, high chemical etching duration (120 min) resulted in improved surface hardness and nitriding kinetics. © 2016 Institute of Materials, Minerals and Mining.Item Role of surface mechanical attrition treatment and chemical etching on plasma nitriding behavior of AISI 304L steel(Elsevier B.V., 2016) Gatey, A.M.; Hosmani, S.S.; Figueroa, C.A.; Arya, S.B.; Singh, R.P.In the present study, the effect of surface mechanical attrition treatment (SMAT) on corrosion resistance and plasma nitriding behavior of AISI 304L stainless steel (SS) was investigated. Mechanical twins and deformation induced martensite phase were observed in the SMAT affected region. SMAT improved the corrosion resistance and nitriding kinetics of AISI 304L SS. Effective nitriding time and hence, the thickness of the nitrided layer were increased with increase in the duration of chemical etching and a decrease in the stability of passive layer on the SMATed specimens. Surface hardness of the nitrided specimens was dependent on the formation of expanded austenite (?N) and its decomposition (especially, at higher effective nitriding time). © 2016 Elsevier B.V.Item Tribo-corrosion study of nickel-free, high nitrogen and high manganese austenitic stainless steel(Elsevier Ltd, 2018) Vats, V.; Baskaran, T.; Arya, S.B.The electrochemical corrosion and tribo-corrosion behaviors of nickel-free high nitrogen (HN SS) and high manganese containing austenitic stainless steel were studied in simulated body fluids such as Ringer's and artificial saliva solutions (ASS) using tribo-meter attached with the potentiostat. Type 316L SS used as reference alloy for comparison. Open circuit potential (OCP) and potentiodynamic polarization techniques were used to examine the passivation and corrosion behavior of both the stainless steels under the applied loads of 5 and 10 N at room temperature and also compared with the static condition of corrosion. Pitting resistance of HN SS was found to be significantly higher over type 316L SS. © 2017 Elsevier LtdItem Deposition of TiN and TiAlN Thin Films on Stainless Steel Tubes by a Cylindrical Magnetron Sputtering Method(ASTM International, 2021) Trivedi, K.; Rane, R.; Joseph, A.; Arya, S.B.Titanium nitride (TiN) and titanium aluminum nitride (TiAlN) coatings are very hard materials that are mostly coated on cutting tools to increase the tool life. These coatings have also been successfully applied as a coating material for biomedical applications mainly due to their tribological properties, biocompatibility, and affordable price. In an attempt to develop transition metal nitride coatings on specimens of cylindrical geometry, TiN and TiAlN thin films were deposited successfully on stainless steel tubes using a direct-current cylindrical magnetron cosputtering method. Both types of coatings were uniform in nature and had good adherence to the substrate. TiN and TiAlN thin films were characterized systematically to determine their structure, surface morphology, chemical states, chemical structure, and electrochemical behavior using X-ray diffraction (XRD), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and potentiodynamic methods, respectively. The XRD patterns of the TiN and TiAlN coatings indicated (111) preferential orientation. Crosssectional SEM images revealed a columnar growth of the coatings with an arrow-headed geometry. XPS characterization showed the presence of TiN, Titanium dioxide, titanium oxynitride, aluminum oxide, and aluminum nitride phases. Potentiodynamic polarization tests in 3.5 % sodium chloride solution revealed that the TiAlN coating exhibited superior corrosion resistance compared with the TiN coating. Furthermore, TiAlN coating showed 94 % of average absorption in ultraviolet-visible region using photospectrometry. The cylindrical magnetron sputter deposition technique enables development of uniform protective coatings on tubular geometries, which are frequently employed in solar thermal and nuclear applications. © 2021 by ASTM International.