Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
6 results
Search Results
Item Experimental and numerical investigation on conjugate effects in deep parallel microchannel using tio2 nanofluid for electronic cooling(Dalian University of Technology, 2018) Narendran, G.; Gnanasekaran, N.; Arumuga Perumal, D.A.The present study reports the numerical investigation of laminar forced convection based on TiO2 nanofluid in a rectangular copper microchannel surrounded by Aluminium block to examine the cooling effects for increased flow rates and particle concentration. The analysis involves the use of pure fluid and TiO2 nanofluid with the volume fractions of 0.01, 0.15, 0.20 and 0.25% for different flow rates. The study also examines the influence of conjugate heat transfer behavior of the microchannel using commercially available software FLUENT-15. © 2018 by the authors of the abstracts.Item A review on recent advances in microchannel heat sink configurations(Bentham Science Publishers, 2018) Narendran, G.; Gnanasekaran, N.; Arumuga Perumal, D.A.A qualitative observation has been undergone to review the various geometries of a microchannel that has been reported for the last two decades in literature majorly for the application of high power devices. Recent research on microchannel is more focused on numerical and experimental work with various configurations of the heat sink. In this paper, a comparative work on different flow geometries used in the microchannel and their influence on heat transfer and pressure drop is investigated with the brief representation of different working fluids used in microchannel heat sink for the purpose of electronic cooling and their associated performance characteristics with various examined parameters. Background: The microchannel cooling is an established cooling technique for high power electronic components which effectively enhances the performance of the high power devices. Objective: This article presents a general overview of microchannels with novel constructional bifurcations structures with related patents. Further, the influential parameter on thermal and flow characteristics with greater depth is also reviewed by authors. Methods: This review directs by presenting standard and benchmark investigation in the microchannel and different working parameters continued with recent studies. Further, it is addressed with the application of electronic cooling with latest patents using bifurcations and fractal microchannels. Result: The current situation of 3D cooling requires a robust cooling system to accommodate increased heat flux without compromising the packaging. Moreover, the recently developed patents also evolved with improved thermal load handling under constrained packaging. Conclusion: The advanced microchannel cooling with an optimized fluid handling system with effective packaging results in a highly effective heat dissipation system. © 2018 Bentham Science Publishers.Item Experimental analysis on exergy studies of flow through a minichannel using Tio2/Water nanofluids(Elsevier Ltd, 2018) Narendran, G.; Bhat, M.M.; Akshay, L.; Arumuga Perumal, D.A.The present study involves an experimental investigation on rectangular minichannel heat sink for processor cooling of a workstation. The thermal dissipation power of the corresponding system is 25 W. The heat sink is directly in contact to the processor core and subjected to continuous increase in heat flux to the sink depending on the system loading. Water and TiO2 nanofluid with volume fraction of 0.10%, 0.15%, 0.21% and 0.25% is used as the cooling fluid in the experiments with different volume flow rates with a pulsating pump in the range of 210–400 ml/min respectively. The observations were performed with the sink in both horizontal and vertical position in which heat sink is allowed to reach two different temperature limits of 40 °C and 55 °C above which it is subjected to cooling. The Increase in minichannel efficiency was noticed when flowrate increased from 210 ml/min to 280 ml/min with an increment of 53%, but it started to reduce when flow rate approaches 360 ml/min. The outlet exergy and pumping power increases as the flow rate increases to a limit. Furthermore, decrease in efficiency was noticed beyond flow rate of 360 ml/min and the highest outlet exergy was found at a flow rate of 360 ml/min for about 147.52 W. Additionally, exergy analysis is performed for pure fluid under different flow conditions were examined. Further the effect of nanofluid on pressure drop subjected to pulsating flow for varying volume concentrations is also presented. © 2018 Elsevier LtdItem Comparative studies on air, water and nanofluids based Rayleigh–Benard natural convection using lattice Boltzmann method: CFD and exergy analysis(Springer Science and Business Media B.V., 2022) Karki, P.; Arumuga Perumal, D.A.; Yadav, A.K.The present study incorporates laminar natural convection and entropy generation in Rayleigh–Benard (R–B) convection with air, water and alumina–water nanofluid as working fluids. The fluid flow and energy equations are solved using D2Q9 and D2Q5 LBM models, respectively. The effects of Rayleigh numbers (Ra = 5 × 103, 104, 105) and volume fractions (? = 0 to 0.08) of nanoparticles on heat transfer and irreversibility are investigated. Results show that the heat transfer evaluated based on Nusselt number is enhanced due to addition of nanoparticles in the base fluid. The maximum enhancement in Nusselt number is found to be 13.93% at Ra = 105 with 8% of nanoparticle in base fluid. The various irreversibilities considered in this study are thermal, fluid flow and total irreversibility, where fluid flow and total irreversibilities in the study depend on irreversibility ratio. The irreversibility ratios taken into account are 10–2, 10–3, 10–4 and 10–5. One facet of study shows the deviation in onset of critical Rayleigh number for air is 1.58%. The other facet indicates dimensionless heat transfer, fluid flow and total irreversibility decrease with the increase in volume fraction of nanoparticles in the base fluid. The analyzed results of irreversibilities are presented in normalized form. In addition, dimensionless entropy generation maps and Bejan number contours are also plotted. © 2021, Akadémiai Kiadó, Budapest, Hungary.Item Integrated microchannel cooling for densely packed electronic components using vanadium pentaoxide (V2O5)-xerogel nanoplatelets-based nanofluids(Springer Science and Business Media B.V., 2023) Narendran, G.; Gnanasekaran, N.; Arumuga Perumal, D.A.; Moolayadukkam, M.; Nagaraja, H.S.The present study reports the implementation of novel nanoplatelets-based vanadium pent oxide (V2O5)-xerogel for the application of conjugate cooling in densely packed electronic devices. An integrated heat sink is made up of copper with a channel width of 490 µm and is shrink-fitted into aluminium block that acts as a heat spreader. V2O5-xerogel is synthesized by melt quenching process and characterized based on field emission scanning electron microscope, transmission electron microscope, and X-ray diffraction to analyse the surface morphology of the particles. Studies related to the stability of the nanofluids for different concentrations are discussed in this paper. Furthermore, a study on the effect of pulsating flow in microchannel is performed for different flow rates. As a result, a maximum enhancement of 17% in heat transfer coefficient was observed for the concentration of 0.4 mass% with a flow rate of 200 mL min-1 compared to a pure fluid. Finally, the results reveal that the xerogel is a potential working fluid for heat transfer applications involving microscale devices. © 2023, Akadémiai Kiadó, Budapest, Hungary.Item NUMERICAL INVESTIGATION ON MULTISTAGE BIFURCATED RECTANGULAR MICROCHANNEL WITH ASYMMETRICAL HOTSPOTS USING NANOFLUID(Begell House Inc., 2025) Narendran, G.; Kumar, A.; Arumuga Perumal, D.A.The numerical investigation of multistage-bifurcated microchannels with asymmetric hotspots using TiO2 nanofluid has been studied. The latest multi-core processors generate an asymmetrical heat flux described as hotpots. In literature, compact heat sinks are used to mitigate hotspots to achieve the cooling demands in industrial applications The temperature in the microchannel heat sink increases along the fluid direction, resulting in higher temperatures at the outlet. One way is to introduce bifurcations near the microchannel exit to reduce the heatsink bottom temperature near the outlet. The effective use of bifurcations for asymmetric hotspot application with nanofluids has not been dealt with much. Subsequently, the study presents a numerical analysis in a multistage bifurcated microchannel with asymmetric hotspots. The analysis provides profound insight into hotspot influences over bifurcation stages and working fluid flow rate. It was found critically that the effect of bifurcations was more criti-cal on flow rate than to the asymmetric hotspot and nanofluids. © 2025 by Begell House, Inc.