Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
9 results
Search Results
Item Phase change materials in chemical and process engineering(Elsevier, 2023) Chavan, S.; Manickam, M.; Arumuga Perumal, A.P.; Gumtapure, V.This chapter is concerned with phase change materials in chemical and process engineering. Industrial waste heat recovery is explored as a source of heating and cooling with the application of phase change materials, which is well known. Consequently, heat transformation technologies are presented in detail along with their technical and economic potentials. Initially, utilization of phase change materials in process industries is discussed, which covers on-site and off-site industrial applications. The concept of on-site and off-site thermal energy utilization is well defined. The large amount of industrial waste heat is generated, which can be stored in the phase change materials, and it can be transported to the place where there is energy requirement in particular. Industries such as metal manufacturing, nonmetal manufacturing, chemicals and chemical products, pulp, and food processing industries are the main focuses of the present study. All the technical aspects are discussed in detail with respect to the future scope of phase change materials with thermal energy storage systems. Thermal energy utilization using phase change materials for chemical process industries also has great potentiality for various applications such as thermal fluid heating systems, gas-fired systems, and solar heating systems, which are also discussed. A comprehensive study has been carried out for potential usage of phase change materials for various manufacturing and process engineering applications. © 2023 Elsevier Ltd. All rights reserved.Item Cooling packing and cold energy storage(Elsevier, 2023) Chavan, S.; Manickam, M.; Arumuga Perumal, A.P.; Gumtapure, V.This chapter is divided into two parts: first part discusses about cooling packing applications of phase change materials, and second part discusses about cold thermal energy storage application of PCM. Consequently, methods of thermal energy storage are briefly explained, specifically for cooling packing applications along with present challenges of the technology. The second part of the chapter discusses in brief about cold thermal energy storage specifically basic working principle, loading of cold thermal energy storage for operational purposes CTES in selecting and characterizing storage media, water versus ice thermal energy storage, PCM used for cold thermal storage, advantages, disadvantages, and finally, battery thermal management system in electric vehicle are discussed in brief with updated knowledge in the field of real-time application. © 2023 Elsevier Ltd. All rights reserved.Item Computational Analysis of Harmonically Oscillating Lid-Driven Incompressible Fluid in L-Shaped Cavity Using Lattice Boltzmann Method(Springer Science and Business Media Deutschland GmbH, 2023) Joe, E.S.; Arumuga Perumal, A.P.The present study explores the use of the lattice Boltzmann method to simulate incompressible flows in L-shaped cavities with and without the presence of circular obstacles. Fluid flow characteristics within the L-shaped cavity are studied for single- and double-wall driven cases, for both parallel and antiparallel motions. An understanding of the effect of the Reynolds number and of the presence of cylindrical obstacles on the flow topology are sought after within the present work. To this end, the effect is studied by the velocity profiles and flow structure focused through streamline patterns. The phase difference for oscillating-wall-motion in the L-shaped cavity with obstacles is also explored. © 2023, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.Item A Computational Study on B-Splines-Based Design Parameterization Strategy for Compressor Annulus for Throughflow Analysis(Springer Science and Business Media Deutschland GmbH, 2023) Damle, M.; Arumuga Perumal, A.P.In this paper, a B-spline-based design parameterization strategy used for preliminary axial compressor design stage is presented. This strategy is critically important for multi-objective optimization problems with contrasting objectives for discovering better compressor configurations. It helps in reducing computation time drastically along with computation costs. In this case, B-splines are used for smooth parameterization of compressor annulus hub and tip lines. The target is to minimize discrepancies between original annulus contour and fitted data. Annulus geometry is modified by perturbing fitted annulus splines at required curve segments while maintaining necessary continuity conditions. Effect of geometry modifications on different flow parameters impacting compressor performance is also studied with the help of throughflow analysis based on streamline curvature method. Conducted investigations compare aerodynamic characteristics of fitted and modified annulus design with respect to the reference design. Additionally, by use of normalization approaches, the present method can be useful to compressor configurations with different length, number of stages and annulus contour. © 2023, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd.Item A review of lattice boltzmann method computational domains for micro-and nanoregime applications(Begell House Inc., 2020) Narendran, G.; Arumuga Perumal, A.P.; Gnanasekaran, N.In the last two decades, microscale and nanoscale devices have received much interest due to the inevitable performance and their numerous applications not only in the field of fluid flow and heat transfer but also in bio-technology, bio-medical engineering, etc. In many situations, besides the conventional experiments and theoretical analysis, computations have emerged as a valuable tool for investigating the fluid transport and heat transfer phenomena. The lattice Boltzmann method (LBM) has emerged as an important option for micro-and nanoscale devices due to the fact that the LBM is well established for the range of Knudsen number. A comparative study on several working fluids used in the field of micro-and nanodevices such as microchannel, micro-cavity, microboiling, and nanochannel is categorized. Various aspects of nanofluids used in natural convection with different cavity configurations, flow boiling, immiscible fluids, liquid–vapor phase change are also critically reviewed. Different remarks and findings of available numerical results with several investigated parameters were summarized. © 2020 Begell House, Inc.Item Thermodynamic irreversibility and conjugate effects of integrated microchannel cooling device using TiO2 nanofluid(Springer, 2020) Narendran, G.; Gnanasekaran, N.; Arumuga Perumal, A.P.Thermal management is highly essential for the latest electronic devices to effectively dissipate heat in a densely packed environment. Usually, these high power devices are cooled by integrating micro scale cooling systems. Most of the works reported in the literature majorly concentrate on microchannel heat sink in which the characteristics of friction factor and enhancement of heat transfer are analyzed in detail. However, due to the advent of compact electronic devices a crucial investigation is required to facilitate an amicable environment for the neighboring components so as to improve the reliability of the electronic devices. Henceforth, in the present study a combined experimental and numerical analysis is performed to provide an insight to determine the performance of a copper microchannel integrated with aluminium block using TiO2 nanofluid for different particle configurations. Needless to say, the present study, which also focuses on entropy generation usually attributed to the thermodynamic irreversibility, is very much significant to design an optimum operating condition for better reliability and performance of the cooling devices. © 2019, Springer-Verlag GmbH Germany, part of Springer Nature.Item Numerical and experimental analysis on thermal energy storage of polyethylene/functionalized graphene composite phase change materials(Elsevier Ltd, 2020) Chavan, S.; Gumtapure, V.; Arumuga Perumal, A.P.The main driving force behind the present work is environmental issues caused due to the usage of plastics, and energy issues. Current work attempts to address these problems by converting recycled plastics into thermal storage materials (TSM). Unfavorable thermophysical properties of plastic make it impractical but these inadequacies can be amended by blending with additives of superior thermophysical properties like, functionalized graphene. Numerical and experimental analysis are carried out to assess the thermal performance of TSMs (LLDPE, CPCM-1, CPCM-2 and CPCM-3) and check the compatibility of the materials. The phase change temperature of TSM is 123 to 125 °C and heat of fusion is 71.95 to 97 kJ/kg. Several thermal characteristics are analyzed to assess thermal performance and the amount of heat energy supplied, rate of heat transfer, and heat storage efficiency are deliberated. Results shown energy level enhancement of 43.17, 50.42, 54 and 50.61% for LLDPE, CPCM-1, CPCM-2 and CPCM-3 respectively. Among the TSM CPCM-2 shows relatively better storage capability (54% enhancement) due to incorporation of optimum concentration of enhancing material. The solidification process takes place through convection and radiation mode of heat transfer, at the completion of solidification process the TSM energy content reduces to 97.5, 96, 96 and 96% for LLDPE, CPCM-1,CPCM-2 and CPCM-3 respectively. This work concludes that, recycled plastics can be blended and it can be converted into efficient thermal storage material. © 2019 Elsevier LtdItem EFFECTS OF NANOREFRIGERANTS FOR REFRIGERATION SYSTEM: A REVIEW(Begell House Inc., 2023) Kumar, A.; Narendran, G.; Arumuga Perumal, A.P.In this article various nanorefrigerants have been critically reviewed towards the performance enhancement of the refrigeration system. Research has been more focused on the different techniques to prepare nanorefrigerants. This paper is an attempt to summarize all aspects of nanorefrigerants such as preparation, thermophysical properties, hydrodynamic study, boiling heat transfer, and performance of nanorefrigerants. It also discusses the effects of different nanoparticles on ther-mophysical properties. Nanorefrigerants are a special category of nanofluid, advanced nanotech-nology-based refrigerants that are stable mixtures of nanoparticles and base fluid, which improve thermophysical properties such as heat transfer and pressure drop and bring compactness to the system. This article presents an overview of improving thermal performance by using different nanoparticle blends with different base refrigerants. Further, influential parameters of nanopar-ticles and thermal performance are discussed. This paper also discusses the effects of different nanoparticles such as Al2O3, TiO2, CuO, carbon nanotubes (CNTs), etc., on thermophysical prop-erties. The present situation requires a robust system and refrigerants for required performance. Some refrigerants cannot be used directly. So, this paper deals with using nanorefrigerants for better system performance such as coefficient of performance (COP) enhancement, compressor work reduction, and energy efficiency. It is seen that the use of nanorefrigerants, or nanotechnology-based refrigerants, results in highly effective cooling and thus enhances the thermophysical properties of refrigeration systems. © 2023 by Begell House, Inc. www.begellhouse.com.Item Analysis of Fluid Flows in Bounded Domain with Particular Shape of a Cavity using Lattice Boltzmann Method(Bentham Science Publishers, 2023) Shetty, V.V.; Balashanker, K.; Arumuga Perumal, A.P.; Patel, V.U.The present work numerically models the incompressible, continuous phase, viscous flow of Newtonian fluid flow in a bounded domain of two-dimensional cavity that is driven by walls and contains grooves in the shape of squares on the lower wall. With the help of the mesoscopic lattice Boltzmann method (LBM) and D2Q9 square lattice model, simulation results are found stable and reliable. The flow physics of the problem by varying Reynolds number, the height and quantity of lower wall grooves, and other fluid flow characteristics within the bounded domain are studied in detail. It is seen that the effects of the groove heights and wavelengths on the fluid flow are structured within the bounded domain. The study is performed from low Re = 100 to high Re = 3200, with minimum two and maximum four-wavelength grooves evaluated on the bottom surface, each having a height of low 0.25 and high 0.75. Additionally, a thorough discussion of complicated vortex dynamics is provided regarding the input parameters and geometry. Objective: The current study aims to use mesoscopic LBM to analyze incompressible viscous fluid flows on complex geometries other than rectangular shapes. Methods: Mesoscopic approach of kinetic theory-based Lattice Boltzmann method (LBM) is implemented in the current work. The popular Single Relaxation Time Lattice Boltzmann method with D2Q9 square lattice model and second-order accurate boundary condition is adopted for the current study. Results: The numerical approach of LBM is used to simulate fluid flows in a 2D bounded domain with grooved bottom surfaces. The influence of different factors, such as the height of bottom-wall surface grooves, flow Reynolds number, and wavelength of these grooves on flow patterns, is then investigated. Conclusion: The numerical study of the bounded domain is considered, and the Reynolds number is varied from 100 to 3200, with two and four-wavelength grooves evaluated on the bottom surface, each having a height of 0.25 and 0.75. The impacts on the flow pattern both within and slightly above the grooves of the computational findings for different Reynolds numbers, groove heights, and groove wavelengths are evaluated. As the Reynolds number rises, the mixing phenomenon of fluid is shown to flow more quickly in the wall-driven enclosures. © 2023 Bentham Science Publishers.