Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Thermal degradation and swelling of thermoplastic vulcanizates from NBR/SAN and NBR/Scrap computer plastics blends(Huthig GmbH, 2009) Anandhan, S.; Rajeev, R.S.; De, S.K.; Bhowmick, A.K.Thermoplastic elastomeric blends of nitrile rubber (NBR)/poly(styrene- coacrylonitrile) (SAN) and NBR/scrap computer plastics (SCP) based on acrylonitrile-butadiene-styrene terpolymer (ABS) were prepared. Thermoplastic elastomeric blends of NBR/SAN containing various amounts of a model waste nitrile rubber powder (w-NBR) were also prepared. Thermogravimetric analysis of the above blends was performed in a nitrogen atmosphere. Both Friedman and Flynn-Wall-Ozawa methods were used for the evaluation of activation energies of thermal degradation of these blends. The dynamically vulcanised blends exhibit higher amount of activation energies for thermal degradation than the unvulcanised ones. Swelling studies were performed in various solvents having different solubility parameter values and maximum swelling was found to occur in a solvent having a solubility parameter that was closer to that of the blend components, i.e., around 20MPa1/2. Dynamically vulcan-ised blends show excellent resistance to IRM #903 oil as well as four chosen solvents possessing different solubility parameters (E).Item Thermoplastic vulcanizates from post consumer computer plastics/nitrile rubber blends by dynamic vulcanization(Springer Japan, 2013) Anandhan, S.; Bhowmick, A.K.Due to depletion of natural resources and increasing greenhouse emissions, new technologies for the transformation of waste polymers into valuable materials represent one of our greatest current needs. Acrylonitrile-butadiene-styrene terpolymer (ABS) is one of the most widely used engineering plastics and is used as outer casing for electronic equipment. Nitrile rubber (NBR) is used in many applications that demand oil resistance. In an attempt to explore whether these materials can be successfully recycled, we prepared blends of scrap computer plastics (SCP) based on ABS with NBR and waste NBR powder (w-NBR), and investigated their mechanical properties and recyclability. Specifically, we assessed the effect of dynamic vulcanization and replacement of virgin NBR with w-NBR on the properties of 60/40, 70/30, and 80/20 NBR/SCP blends. These blends exhibited thermoplastic elastomeric behavior. The thermoplastic elastomeric blends showed excellent swelling resistance to standard lubricant oil (namely, IRM 903 oil). © 2013 Springer Japan.Item Physicochemical characteristics of bio-based thermoplastic polyurethane/graphene nanocomposite for piezoresistive strain sensor(John Wiley and Sons Inc. P.O.Box 18667 Newark NJ 07191-8667, 2020) Khalifa, M.; Ekbote, G.S.; Anandhan, S.; Wuzella, G.; Lammer, H.; Mahendran, A.R.Herein, we report the physicochemical characteristics and piezoresistive strain sensing performance of flexible thin film comprising graphene and bio-based thermoplastic polyurethane (TPU) prepared by solution cast method. A detailed analysis was carried to study the influence of graphene nanoplatelets on the morphological, thermal, mechanical, and electrical properties of TPU nanocomposite. Upon increasing the graphene nanoplatelets loading, the thermal stability and tensile properties improved remarkably, while glass transition temperature decreased slightly. Owing to better dispersion of graphene, the electrical conductivity was significantly increased, which broaden the utilization of the nanocomposite for various applications. The piezoresistive sensor was able to respond to various stress modes such as tapping, bending, and finger touch. The piezoresistive sensor was sensitive and achieved a gauge factor of 11. Sensor attached to finger, showed distinctive response upon bending at different angles and showed high stability and reproducibility even after >10,000 cycles under repetitive constant load. Also, the nanocomposite was able to detect any breakage or fracture in the form of change in electrical resistance. A combination of bio-based TPU and graphene offered improved physical properties and high sensing performance, which could be a potential material in flexible electronics and structural health monitoring systems. © 2020 Wiley Periodicals, Inc.