Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
15 results
Search Results
Item Characterization of poly(ethylene-co-vinyl acetate-co-carbon monoxide)/layered silicate clay hybrids obtained by melt mixing(2011) Anandhan, S.; Patil, H.G.; Babu, R.R.In recent times, polymer-layered silicate nanocomposites have drawn a great deal of attention because they often exhibit tremendous improvements in material properties compared with virgin polymers or conventional microor macro-composites. In the present study, nanocomposites were developed from organically modified clay and poly(ethylene-co-vinyl acetate-co-carbon monoxide) by melt mixing. FTIR spectroscopy reveals that the interaction between the organoclay and EVACO is thermodynamically favored. High resolution wide angle X-ray diffraction and transmission electron microscopy were used to study the morphology of the nanocomposites. Elemental mapping by scanning electron microscopy indicates good dispersion and distribution of the nanoclay in EVACO matrix. The mechanical properties of the nanocomposites are optimum at a clay loading of 3%. © Springer Science+Business Media, LLC 2011.Item Use of nano-ATH as a multi-functional additive for poly(ethylene-co-vinyl acetate-co-carbon monoxide)(Springer Verlag service@springer.de, 2014) George, G.; Mahendran, A.; Anandhan, S.Flame retardant aluminum hydroxide (ATH) nanoparticles of size ?10-20 nm were dispersed in ethylene-vinyl acetate-carbon monoxide terpolymer (EVACO) via solution casting. The effect of filler loading on the crystallizability, thermal, mechanical, flammability, optical and electrical properties of EVACO was evaluated. At 1 % filler loading nano-ATH particles exhibited very good dispersibility in the EVACO matrix and the % crystallinity of EVACO is the highest at this filler loading. The changes in crystallinity were studied by X-ray diffractometry and differential scanning calorimetry. The highest tensile strength was observed for the composite with 1 % nano-ATH loading, which has the best filler dispersion, and the decay in the tensile properties at higher filler loading is due to agglomerations of ATH nanoparticles and polymer-filler interface debonding. The UV absorption of these composites is augmented irrespective of the nano-ATH loading and ATH emerges as a good absorber of UV light. The DC electrical conductivity study of the composites proves that the addition nano-ATH is an efficient way to improve the dielectric properties of EVACO. The presence of nano-ATH improves the flame retardance of these composites. © 2014 Springer-Verlag Berlin Heidelberg.Item Influence of organically modified clay mineral on domain structure and properties of segmented thermoplastic polyurethane elastomer(2014) Anandhan, S.; Lee, H.S.Segmented polyether-urethane/organically modified montmorillonite (O-MMT) nanocomposites were synthesized with poly(tetramethylene glycol) (PTMG), 4,4?-diphenylmethane diisocyanate (MDI), butane diol (BD), and a commercially available clay Cloisite-30B® (O-MMT). The state of dispersion of the clay crystals in the thermoplastic polyurethane elastomer (TPU) matrix was studied by X-ray diffraction and transmission electron microscopy (TEM). The phase-separated morphology of the TPU was revealed by high-resolution TEM (HRTEM) and atomic force microscopy (AFM). O-MMT caused a marginal increase in the glass transition temperature of the soft segments of the TPU and this increase is proportional to the amount of O-MMT in the nanocomposites. Differential scanning calorimetry (DSC) was employed to study the effect of O-MMT on the extent of phase separation in the TPU in these nanocomposites. Thermogravimetric analysis (TGA) results indicate a substantial improvement in the thermal stability of TPU by the addition of O-MMT. Tensile strength and elastic modulus are dramatically decreased by the incorporation of O-MMT into TPU, which is due to the hindrance of the phase-separation process by the exfoliated clay-layered crystals. © The Author(s) 2012 Reprints and permissions:sagepub.co.uk/journalsPermissions.nav.Item Probing the synergism of halloysite nanotubes and electrospinning on crystallinity, polymorphism and piezoelectric performance of poly(vinylidene fluoride)(Royal Society of Chemistry, 2016) Khalifa, M.; Mahendran, A.; Anandhan, S.Poly(vinylidene fluoride) (PVDF) nanofibers have tremendous potential in nano-sensing and energy scavenging applications. In this study, uniaxially aligned nanofibers were developed from halloysite nanotubes (HNT)/PVDF nanocomposite using electrospinning technique. Incorporation of HNT into PVDF not only reduced the diameter of the electrospun nanofibers, but, also improved their morphology. Fourier transform infrared spectroscopy, wide angle X-ray diffraction and differential scanning calorimetry techniques were used to characterize the crystallinity, polymorphism and polymer-filler interaction in the nanocomposite nanofibers. A force sensor was indigenously designed to study the piezoelectric responses of the nanocomposite nanofibers. At 10 wt% of HNT loading, the sensor produced the highest voltage output, which can be ascribed to its highest ?-phase content. Incorporation of HNT and use of electrospinning synergistically enhanced the ?-phase content and hence the piezoelectric behavior of PVDF. Hence, these nanofibers could be promising and prominent materials in sensor and actuator applications. © The Royal Society of Chemistry.Item Structure-property relationship of halloysite nanotubes/ethylene-vinyl acetate-carbon monoxide terpolymer nanocomposites(SAGE Publications Ltd info@sagepub.co.uk, 2017) George, G.; SelvaKumar, M.; Mahendran, A.; Anandhan, S.Poly(ethylene-co-vinyl acetate-co-carbon monoxide) (EVACO)/halloysite nanotube (HNT) nanocomposite films were solution cast. Dispersion of HNTs in the matrix was analyzed by elemental mapping and the role of HNTs on crystallizability, flammability and thermal, mechanical, and electrical properties of the polymer was evaluated. The nature of interaction between the EVACO matrix and HNTs was studied using Fourier transform infrared spectroscopy. The highest tensile strength was observed for the composite with 1% filler loading, whereas the highest crystallinity was observed for that with 3% filler loading. The decay in the tensile properties at higher filler loading was due to agglomeration of HNTs and debonding of polymer-filler interface. The electrical volume resistivity of the composites decreased with HNT loading because of the ionic charge transfer. The direct current electrical resistivity study of the composites proves that the addition of HNT can improve the antistatic properties of the polymer. © The Author(s) 2015.Item Synergism of graphitic-carbon nitride and electrospinning on the physico-chemical characteristics and piezoelectric properties of flexible poly(vinylidene fluoride) based nanogenerator(Springer Netherlands rbk@louisiana.edu, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.Herein, we investigated the piezoelectric performance of electrospun poly(vinylidene fluoride)/graphitic carbon nitride (PVDF/g-C 3 N 4 ) nanocomposite fibers (PGN-X). Addition of g-C 3 N 4 nanosheets improved the spinnability of nanofibers and augmented the ?-phase content of PVDF. The synthesized PGN non-woven mats were flexible and easily deformable without disrupting the continuity of fibers. Upon the addition of g-C 3 N 4 , tensile strength and thermal stability of nanocomposite fibers improved significantly. A maximum voltage output of ~7.5 V was generated for PGN nanogenerator which is ~8 times more than that of PVDF nanogenerator. Also, the PGN-X nanogenerator generated current output of 0.23 ?A and a power density of 0.22 ?W/cm ?2 . Improved physico-chemical characteristics and piezoelectric performance of PGN nanogeneratoris promising and makes it suitable for portable electronic and wearable devices. © 2019, The Polymer Society, Taipei.Item Durable, efficient, and flexible piezoelectric nanogenerator from electrospun PANi/HNT/PVDF blend nanocomposite(John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Mahendran, A.; Anandhan, S.Currently, there is considerable research focus on portable, lightweight, shock-resistant, and inexpensive wearable devices that are ideally powered by harvesting abundant mechanical or vibration energy, making battery or related wiring superfluous. In this study, piezoelectric nanogenerator was electrospun from PANi (polyaniline)/HNT (halloysite nanotube)/PVDF (poly[vinylidene fluoride]) blend nanocomposite. Polymorphism, crystallinity and morphology of the nanogenerator were explored in detail. HNT and PANi acted as a nucleating agent and conductive filler, respectively in PVDF; their synergism helps improve the piezoelectric performance of PVDF. The piezoelectric performance of the nanogenerator patch was studied under various external mechanical stresses, such as pressure, tapping, and impact. A maximum voltage output of approximately 7.2 V was generated by the nanogenerator under impact. The nanogenerator patch attached to human arm exhibited not only excellent piezoelectric response during arm movements, but, also proved to be flexible, highly sensitive and durable. This nanogenerator could possibly be used in wearable piezoelectric energy conversion application for self-powered devices. POLYM. COMPOS., 40:1663–1675, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics EngineersItem PVDF/halloysite nanocomposite-based non-wovens as gel polymer electrolyte for high safety lithium ion battery(John Wiley and Sons Inc. cs-journals@wiley.com, 2019) Khalifa, M.; Janakiraman, S.; Ghosh, S.; Adyam, A.; Anandhan, S.Gel polymer electrolyte (GPE) based on electrospun poly(vinylidene fluoride) (PVDF)/halloysite nanotube (HNT) nanocomposite non-wovens was synthesized and its suitability as a separator in lithium-ion battery (LIB) was explored. In this study, HNT played a key role in reducing the average diameter of the electrospun fibers and uplifted the porosity of the non-wovens thereby improving their electrolyte uptake. Due to a reduction in crystallinity and increased % porosity of the PVDF/HNT non-wovens, the ionic conductivity (1.77 mScm?1) and ionic transport across the separator were improved. Moreover, this GPE separator exhibited high tensile and puncture strength with negligible thermal shrinkage and a higher melting temperature compared with a commercially available separator, which is vital from the safety perspective. The cycling performance of Li/GPE/LiCoO2 cell was evaluated and it exhibited a high capacity of 138.01 mAhg?1 with 97% coulombic efficiency for the initial cycle. The cell was stable and retained its high performance with little loss in capacity even after repeated charge–discharge cycles. Such a combination of high ionic conductivity, tensile strength with low thermal shrinkage is seen to be very rare in polymer-based separators. It is noteworthy that this novel GPE outperformed the commercial separator also in the cycle performance. POLYM. COMPOS., 40:2320–2334, 2019. © 2018 Society of Plastics Engineers. © 2018 Society of Plastics EngineersItem PVDF Nanofibers with Embedded Polyaniline-Graphitic Carbon Nitride Nanosheet Composites for Piezoelectric Energy Conversion(American Chemical Society service@acs.org, 2019) Khalifa, M.; Anandhan, S.Herein, a facile approach was used to synthesize an ultrasensitive, durable, and flexible electrospun poly(vinylidene fluoride) (PVDF)/polyaniline (PANI)/graphitic carbon nitride nanosheets (g-C3N4) blend nanocomposite fibers (PPBF) based piezoelectric nanogenerator. PANI/g-C3N4 nanocomposite (PGNC) was prepared prior to its dispersal in PVDF. This unpretentious synthesis approach exploited the ?-nucleating activity of g-C3N4 along with the enhancement of electrical conductivity due to a network of PANI within individual PVDF nanofibers. Addition of PGNC and electrospinning synergistically enhanced the ?-phase content (?97%) of PVDF. The PPBF nanogenerator displayed remarkable improvement in the voltage and current output compared to pristine PVDF nanofibers (?1300%). The nanogenerator generated a voltage output of ?30 V and current output of 3.7 ?A with high stability and reproducibility (>50※000 cycles). The PPBF nanogenerator exhibited high-power density and conversion efficiency and was able to light up 70 commercial LEDs. The newly developed high performance nanogenerator could be a potential material in smart, self-powered wearable devices. © 2019 American Chemical Society.Item Development of a new flexible nanogenerator from electrospun nanofabric based on PVDF/talc nanosheet composites(Royal Society of Chemistry, 2020) Shetty, S.; Mahendran, A.R.; Anandhan, S.Herein, a flexible piezoelectric nanogenerator composed of electrospun talc/PVDF [poly(vinylidene fluoride)] nanocomposite fabrics has been developed. These nanocomposite fabrics demonstrated enhanced mechanical and piezoelectric properties compared with pristine PVDF nanofabrics. In particular, nanocomposite fabrics with 0.50 wt% talc yielded 89.6% of polar ?-phase in the PVDF matrix, thereby augmenting its piezoelectric response. X-ray diffraction, Fourier transform infrared spectroscopy, and differential scanning calorimetry conclusively affirmed the promotion of polar ?-phase in the talc/PVDF nanocomposite fabrics. The 0.50 wt% talc/PVDF nanocomposite fabric based nanogenerator produced an open-circuit voltage and power density of 9.1 V and 1.12 ?W cm-2, respectively, under repetitive finger tapping mode (under a load of 3.8 N). Furthermore, the nanogenerator was also subjected to frequency modulated-shaker mode, wherein an output voltage of 8.9 V was produced. Improved flexibility, mechanical robustness, and enhanced piezoelectric responsiveness of this nanogenerator could possibly pave the way for its use in portable self-powered devices. This journal is © 2020 The Royal Society of Chemistry.