Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Anandhan, S.Subject: search.filters.subject.Chlorine compounds

Search Results

Now showing 1 - 5 of 5
  • No Thumbnail Available
    Item
    Thermodynamic miscibility and thermal and mechanical properties of poly(ethylene-co-vinyl acetate-co-carbon monoxide)/poly(vinyl chloride) blends
    (John Wiley and Sons Inc, 2015) SelvaKumar, M.; Mahendran, A.; Bhagabati, P.; Anandhan, S.
    This paper reports the miscibility and thermal and mechanical properties of solution cast binary blends of poly(ethylene-co-vinyl acetate-co-carbon monoxide) (EVACO) and poly(vinyl chloride) (PVC). The composition of these blends was varied from 10:90 to 90:10 of PVC/EVACO (w/w %). Fourier transform infrared spectroscopy revealed an extensive intermolecular attraction between the blend components, which accounts for their mutual solubility. The differential scanning calorimetry study revealed that the blend components are miscible with each other in all proportions as they exhibited a single glass transition temperature. Tensile strength, moduli, and thermal stabilities of these blends significantly improved with increasing proportion of PVC. © 2014 Wiley Periodicals, Inc.
  • No Thumbnail Available
    Item
    Electrochemical characterization of a polar ?-phase poly (vinylidene fluoride) gel electrolyte in sodium ion cell
    (Elsevier B.V., 2019) Janakiraman, S.; Surendran, A.; Biswal, R.; Ghosh, S.; Anandhan, S.; Adyam, A.
    A polar ?-phase poly (vinylidene fluoride) (PVDF) membrane is developed through the electrospinning method. PVDF gel electrolyte for sodium ion batteries was obtained by saturating the bare porous membrane in a liquid electrolyte, 1 M NaClO4 in EC: DEC (1:1 vol%). The physical and electrochemical characteristics of the polar ?-phase PVDF membrane are explored by X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Atomic force microscope (AFM), sodium ion conductivity, linear sweep voltammetry (LSV) and sodium ion transference number. The ionic conductivity of a polar ?-phase PVDF gel electrolyte exhibited 9.2 × 10?4 S cm?1, higher than the commercially used Celgard® 2400 membrane 0.36 × 10?4 S cm?1 at ambient temperature. The electrochemical expolarations of the sodium ion half-cell (Na2/3Fe1/2Mn1/2O2) as a cathode and sodium metal as a counter electrode) conducted from PVDF gel electrolyte are analysed by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). CV of the battery showed a pseudo capacitive nature. The equivalent circuit model of the sodium ion cell brought out the effect of dipole moments in the polymer chains on the battery performance. © 2018 Elsevier B.V.
  • No Thumbnail Available
    Item
    Ductility and Flame Retardancy Enhancement of PVC by Nanostructured Fly Ash
    (Springer editorial@springerplus.com, 2019) Patil, A.G.; Mahendran, A.; SelvaKumar, M.; Anandhan, S.
    Fly ash (FA) obtained from a coal-fired local thermal power station was converted into a nanostructured material by mechano-chemical activation using a high energy planetary ball mill. Contact angle measurements and FTIR spectroscopy confirmed the surface modification of mechano-chemically activated FA (MCA-FA). Subsequently, a solution casting method was used to prepare poly(vinyl chloride) (PVC) matrix composites with varying amounts of fresh FA and MCA-FA. Mechanical testing results of the composites revealed that incorporation of fresh FA in PVC resulted in a higher tensile strength with brittle failure; addition of MCA-FA to PVC resulted in higher elongation at break values while retaining the ductility of the PVC. We have proposed a plausible mechanism explaining the influence of fresh FA and MCA-FA on the mechanical behavior of these composites. As fresh FA and MCA-FA contain basic oxide materials, they tend to improve the fire retardancy of PVC even at a very small loading. Overall, the nanostructured MCA-FA could find application as a filler in PVC-based products. © 2016, Springer Science+Business Media Dordrecht.
  • No Thumbnail Available
    Item
    An electroactive ?-phase polyvinylidene fluoride as gel polymer electrolyte for magnesium–ion battery application
    (Elsevier B.V., 2019) Singh, R.; Janakiraman, S.; Khalifa, M.; Anandhan, S.; Ghosh, S.; Adyam, A.; Biswas, K.
    The gel polymer electrolytes (GPEs) are currently interesting research area in rechargeable batteries. In the present study, synthesis and characterization of electroactive gel polymer electrolyte (EGPE) for Mg-ion batteries application have been investigated. The bead free electroactive polyvinylidene fluoride (PVDF) with high porosity is achieved by an electrospinning process. The ?-phase of PVDF is polar and electroactive with a high dipole moment. Electroactive ?-phase is confirmed by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). Field emission scanning electron microscopy (FESEM) study is done to analyze the structure and morphology of the electroactive membrane. The electroactive gel polymer electrolyte is formed by immersing an electroactive PVDF membrane in 0.3 M magnesium perchlorate (MgClO4) and propylene carbonate (PC) solution. The ionic conductivity of electroactive ?-phase PVDF membrane is achieved to be 1.49 mS cm?1 at 30 °C, which is higher than commercial available polypropylene (PP) Celgard. Tortuosity of electroactive gel polymer electrolyte is found to be 1.44. The voltage stability of the EGPE is stable up to a high voltage of 5.0 V against Mg+2/Mg. The total ionic transference number and magnesium ion transference number of EGPE are also investigated to confirm high ionic conductivity. © 2019 Elsevier B.V.
  • No Thumbnail Available
    Item
    Cationic surfactant assisted enhancement of dielectric and piezoelectric properties of PVDF nanofibers for energy harvesting application
    (Royal Society of Chemistry, 2021) Ekbote, G.S.; Khalifa, M.; Mahendran, A.; Anandhan, S.
    Poly(vinylidene fluoride) (PVDF) is among the most versatile polymers due to its wide range of properties, including dielectric, piezoelectric and ferroelectric properties. However, more frequently than not a range of processing routes and/or additives have been used to enhance such properties. In this study, PVDF nanofibers were electrospun from PVDF solution that contained tetra-n-butyl ammonium chloride (TBAC) at different loadings (1, 2, 3, and 5 wt%). The effect of TBAC on the morphology, crystallinity, and polymorphism of PVDF was studied using various characterization techniques. Addition of TBAC significantly improved the electroactive ?-phase of PVDF. The highest ?-phase content of 89% was attained at a TBAC loading of 3 wt%. Consequently, the dielectric and piezoelectric properties of the PVDF nanofibers improved significantly. A nanogenerator fabricated using 3 wt% TBAC/PVDF nanofibers exhibited the maximum voltage output of 17.2 V (under 5 N force) and the maximum power density of ?1.4 ?W cm?2(under 3 N force). Improved dielectric and piezoelectric properties of PVDF upon the addition of a small amount of TBAC could be useful for researchers in upbringing the material for flexible electronic devices. © The Royal Society of Chemistry 2021.