Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Improved electrochemical performance of graphene oxide supported vanadomanganate (IV) nanohybrid electrode material for supercapacitors(Elsevier Ltd, 2020) Kumari, S.; Maity, S.; Anandan Vannathan, A.A.; Shee, D.; Das, P.P.; Mal, S.S.Graphene oxide (GO)-supported polyoxometalates (POMs) have been considered as promising electrode materials for energy storage applications due to their ability to undergo fast and reversible redox reactions. Herein, vanadomanganate-GO composites (K7MnIVV13O38.18H2O-GO with 2:1 and 4:1 ratio) were investigated for use as potential electrode materials in supercapacitors (SCs). The K7MnIVV13O38.18H2O (MnV13) was synthesized and anchored on GO through electron transfer interaction and electrostatic interaction to make the composite electrodes for the present study. All synthesized electrode materials were fully characterized by various techniques, e.g., Fourier Transform Infrared (FTIR) Spectroscopy, Powder X-ray Diffraction (XRD), Scanning Electron Microscopy/Energy Dispersive X-ray Spectroscopy (SEM/EDS) and High Resolution-Transmission Electron Microscopy (HR-TEM). The electrochemical properties of MnV13/GO composites with different MnV13/GO ratios were investigated by two-electrode cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD) in different electrolytes. The MnV13/GO composite of ratio 2:1 in 1 M LiCl electrolyte and that of ratio 4:1 in 1 M Na2SO4 electrolyte showed significant specific capacitance values of 269.15 F/g and 387.02 F/g, respectively and energy density of 37.38 Wh/kg and 53.75 Wh/kg, respectively for a scan rate of 5 mV/s. Interestingly, the 1:1 (MnV13/GO) composite in 1 M Na2SO4 and 1 M LiCl electrolytes showed very low specific capacitance values as the deposition of MnV13 on GO was not sufficient, as indicated by FTIR and SEM. Thus, it is evident that the specific capacitance value of these composite materials depends on the amount of MnV13 deposited on GO and these composite materials exhibit the potential to improve the performance of GO-based SCs. © 2019Item Imidazolium cation linkers of polyoxomolybdate-polypyrrole nanocomposite electrode-based energy storage supercapacitors(Elsevier Ltd, 2022) Muhammed Anees, P.K.; Anandan Vannathan, A.A.; Abhijith, M.B.; Kella, T.; Shee, D.; Mal, S.S.The electrochemical properties of a new hybrid electrode, liquid-polyoxometalate-polypyrrole (BMIM-PVMo11-PPy) have been studied. The H4[PVMo11O40] (PVMo11) was combined with 1-Butyl-3-methyl-imidazolium (BMIM) ionic liquid and then doped on the polypyrrole (PPy) surface. In order to investigate the interaction between the BMIM, PVMo11, and PPy compound was characterized using various analytical techniques, such as Infrared spectroscopy, thermal stability analysis, powder X-ray diffraction, multinuclear NMR (1H and 13C), FESEM, EDX, and surface adsorption studies. The electrochemical performance of the BMIM-PVMo11-PPy composite material has been tested in an aqueous 0.25 M H2SO4 electrolytic solution. The BMIM-PVMo11-PPy composite exhibits the highest specific capacitance of 527.39 F g−1 at a current density of 1 A g−1, along with remarkable specific energy and power of 51.07 Wh kg−1 and 1078.96 W kg−1, respectively. The BMIM-PVMo11-PPy composite was observed to light up red and blue color LED bulbs for 66 and 16 s, respectively, with 84 mg of sample coated on carbon cloth, suggesting an incredible specific power of that material. © 2021 Elsevier B.V.Item Investigations of redox-active polyoxomolybdate embedded polyaniline-based electrode material for energy application(Springer Science and Business Media Deutschland GmbH, 2022) Anandan Vannathan, A.A.; Kella, T.; Shee, D.; Mal, S.S.Higher capacitance supercapacitors have received considerable attention, including their massive power density, high stability, and long cycle life. On the other hand, polymers have been known for their energy storage device application because of the pseudocapacitance behavior resulting from the extended conjugation over the polymer backbone. Here, we report a simple chemical bath deposition method for the synthesis of two polyoxometalates (H4[PVMo11O40] and H5[PV2Mo10O40]) impregnated polyaniline (PAni) composite (PVMo11@PAni and PV2Mo10@PAni) for electrochemical supercapacitors. Various analytical methods characterized the electrode materials, e.g., Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), powder X-ray diffraction (PXRD) method, and the morphological features of those electrodes were acquired by field emission scanning microscopy (FESEM). The exceptionally high average capacitance of 1371 F g−1 was obtained for the composite PVMo11@PAni electrode at a 3 A g−1 current density and 1 V potential window with an energy density of 137.5 W h kg−1. The PVMo11@PAni composite electrode showed almost 4.3 times the higher energy density than pure PAni and 2.3 times higher than PV2Mo10@PAni. In contrast, PV2Mo10@PAni composite showed 1.9 times more energy density than pure PAni composite electrode. Interestingly, high average capacitance, charge–discharge rates, and high energy density with high-level power delivery make them promising electrode candidates for supercapacitors. © 2021, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.Item Vanadomanganate as a synergistic component in high-performance symmetric supercapacitor(Elsevier Ltd, 2022) Maity, S.; Anandan Vannathan, A.A.; Chandewar, P.R.; Shee, D.; Das, P.P.; Mal, S.S.Supercapacitor devices fabricated from capacitive and battery-type hybrid electrodes have been projected as a promising energy storage system because of their ability to produce high specific power and energy simultaneously. In this work, we have demonstrated a facile method of impregnation of faradaic type manganese (III) polyoxovanadate, [MnV14O40]−6 on the high surface area substrate of activated carbon (AC) as well as graphene oxide (GO). Materials and electrochemical characterizations data confirm the successful incorporation of capacitive and faradaic type manganese (III) polyoxovanadate into the nanohybrid electrode material. Furthermore, the synergic effect between the carbonaceous nanostructures (AC/GO) and redox-active oxometalate (MnV14) provides a better pathway for ion transport to the interface resulting in enhancement of the conductivity, diffusion ability of the nanohybrid. Moreover, the battery-type MnV14 clusters disperse in the micro/mesopores of AC, whereas the oxygen-containing functional groups in GO act as active sites for anchoring of MnV14 clusters. Thus, the surface modification with MnV14 clusters enhances the specific capacitance of nanohybrid with remarkable electrical and mechanical stability. The AC/MnV14 nanohybrid exhibits an enhanced specific capacitance of 547 F g−1 with specific energy and power of 76 Wh kg−1 and 1600 W kg−1, respectively, at 0.8 A g−1 current density. Additionally, GO/MnV14 shows a specific capacitance of 330 F g−1 with improved specific energy and power of 30 Wh kg−1 and 1276 W kg−1, respectively, at the same current density. Moreover, both the nanohybrids possess excellent cycle stability by retaining 92% (AC/MnV14) and 90.6% (GO/MnV14) of initial capacitance even after 5000 sweeping cycles. © 2021 Elsevier B.V.