Faculty Publications

Now showing 1 - 3 of 3

A Mechanistic Study on the Structure Formation of NiCo2O4 Nanofibers Decorated with In Situ Formed Graphene-Like Structures
(Springer New York LLC barbara.b.bertram@gsk.com, 2018) Kumar, B.; Gudla, V.C.; Ambat, R.; Kalpathy, S.K.; Anandhan, S.
Nickel cobaltite (NCO) nanofibers were synthesized using poly(styrene-co-acrylonitrile) (SAN) as the polymeric binder through sol–gel assisted electrospinning. Defect-free precursor nanofiber mats were pyrolyzed at 773 K at three different pyrolysis soaking times t = 2, 4, and 6 h. The SAN present in the precursor nanofibers caused morphological changes in the NCO nanofibers during their thermochemical degradation. Consequently, fractal aggregates of NCO nanoparticles were formed along the length of the nanofibers. X-ray photoelectron spectroscopy (XPS) revealed both + 2 and + 3 oxidation states for Ni and Co, with spinel crystal defects due to oxygen rich atmosphere. XPS, high-resolution transmission microscopy, and optical analysis showed graphene-like structures embedded within the NCO nanofibers. With increase in pyrolysis soaking time, the morphology of the NCO particles markedly changed from spherical to rod-like. We propose a mechanism for the morphological change of NCO nanoparticles on the basis of crystallite splitting accompanied by particle splitting and reordering. © 2018, Springer Science+Business Media, LLC, part of Springer Nature.
Polymorph nickel titanate nanofibers as bifunctional electrocatalysts towards hydrogen and oxygen evolution reactions
(Royal Society of Chemistry, 2019) Kumar, B.; Tarafder, K.; Shetty, A.R.; Hegde, A.C.; Gudla, V.C.; Ambat, R.; Kalpathy, S.K.; Anandhan, S.
Producing pure H2 and O2 to sustain the renewable energy sources with minimal environmental damage is a key objective of photo/electrochemical water-splitting research. Metallic Ni-based electrocatalysts are expensive and eco-hazardous. This has rendered the replacement or reduction of Ni content in Ni-based electrocatalysts a decisive criterion in the development of bifunctional electrocatalytic materials. In the current study, spinel/ilmenite composite nickel titanate (NTO) nanofibers were synthesised using sol-gel assisted electrospinning followed by pyrolysis at different soaking temperatures (viz., 773, 973, and 1173 K). The presence of a defective spinel NTO phase (SNTO) distributed uniformly along the nanofibers was confirmed by X-ray photoelectron and Raman spectroscopy. The electron micrographs revealed the morphological change of NTO nanofibers from a mosaic to bamboo structure with an increase in pyrolysis soaking temperature. The electrocatalytic activity of NTO nanofibers obtained at different pyrolysis soaking temperatures for alkaline water-splitting was studied. The highly defective SNTO manifests properties similar to metallic Ni and favours H2 evolution through the hydrogen evolution reaction (HER) by adsorbing more H+ ions on active sites. In contrast, the ilmenite NTO favours O2 discharge. These results are explained based on the morphology of the NTO nanofibers. The mosaic structure which has higher porosity and greater SNTO content shows excellent HER performance. In contrast, the large bamboo structured NTO nanofibers which have lesser porosity and SNTO content cage the bigger (OH)ads ions at their catalytic sites to facilitate OER performance. 2019 © The Royal Society of Chemistry.
Graphene nanoclusters embedded nickel cobaltite nanofibers as multifunctional electrocatalyst for glucose sensing and water-splitting applications
(Elsevier Ltd, 2019) Kumar, B.S.; Gudla, V.C.; Ambat, R.; Kalpathy, S.K.; Anandhan, S.
Nickel cobaltite (NCO) attains the apex of Sabatier-type volcano plot for electrochemical reaction compared to simple oxides due to synergetic effect of mixed transition metal cations. The combination of high surface area, aspect ratio, and porosity of electrospun NCO nanofibers (NCO-NF) enhance their electrocatalytic performance by improved electron mobility and more active sites. In the present study, NCO-NF fabricated using poly (styrene-co-acrylonitrile) (SAN) as a sacrificial polymer, were embellished with graphene nanoclusters (GNC), which augment the electrocatalytic performance of the NCO-NF. The in situ formed GNC along the NCO-NF are result of the interaction between the polar functional groups of the polymer, and the cations of precursor salts during the calcination of precursor nanofibers. The GNC/NCO-NF with least crystallite size and high aspect ratio having porous NCO nanoparticles and in situ grown GNC were developed using sol-gel electrospinning process assisted by calcination of precursor nanofibers. This simple, eco-friendly, and economical synthesis route with unique structure chemistry of SAN to form GNC and the presence of dual cations (Ni and Co) provides enhanced performance and multifunctionality to GNC/NCO-NF electrodes for electrocatalytic applications, such as biosensors and water-splitting. In the present study, the modified electrodes (GNC/NCO-NF/graphite electrode) exhibited excellent non-enzymatic glucose detection over a wide range of concentration with a lower limit of 1.2 ?M and sensitivity of 1827.5 ?A mM?1 mg?1 in 0.1 M NaOH. Further, the modified electrodes were also tuned for H2O2 detection to aid enzymatic glucose sensing. When examined for bifunctional water-splitting in 1 M NaOH, the electrode reached an onset potential of ?0.537 V and 0.735 V against reversible hydrogen reference electrode and a Tafel slope of 37.6 mV·dec?1 and 67.0 mV·dec?1 for hydrogen and oxygen evolution reactions, respectively. The results prove that GNC/NCO-NF are promising candidates as multifunctional electrocatalyst. © 2019 Elsevier Ltd and Techna Group S.r.l.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results