Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Search Results

Now showing 1 - 3 of 3
  • Item
    A New Single-Source Nine-Level Quadruple Boost Inverter (NQBI) for PV Application
    (Institute of Electrical and Electronics Engineers Inc., 2022) Singh, A.K.; Raushan, R.; Mandal, R.K.; Ahmad, M.W.
    Multi-level inverters (MLIs) with switched capacitors are becoming popular due to their utilization in AC high-voltage applications as well as in the field of renewable energy. To achieve the required magnitude of output voltage, the switched capacitor (SC) technique employs a lesser number of DC sources in accordance with the voltage across the capacitor. Designing an efficient high-gain MLI with fewer sources and switches needs a rigorous effort. This paper introduces a prototype of a nine-level quadruple boost inverter (NQBI) topology powered by one solar photo-voltaic source using fewer capacitors, switches, and diodes when compared to the other SC-MLIs topology. The suggested NQB inverter produces nine levels of voltage in its output by efficiently balancing the voltages of the two capacitors. The various SC-MLIs are compared in order to highlight the benefits and drawbacks of the proposed nine-level quadruple boost inverter (NQBI) topology. To validate the efficacy of the proposed solar photovoltaic based NQBI without grid connection, detailed experimental results are presented in a laboratory setting under various test conditions. © 2013 IEEE.
  • Item
    A Reduced Component Count Self-Balance Quadruple Boost Seventeen-Level Switched Capacitor Inverter
    (Institute of Electrical and Electronics Engineers Inc., 2024) Ahmed, S.; Raushan, R.; Ahmad, M.W.
    A switched capacitor multilevel inverter (SCMLI) enables high-quality output voltage waveforms for various industrial and renewable energy applications. SCMLI uses a combination of capacitors and switches to generate multiple voltage levels from a single dc source, thereby reducing the overall cost and size of the system. This article proposes a novel configuration of a 17-level SCMLI. The proposed converter can boost four times the input voltage by exploiting the series-parallel connection of capacitors with the dc voltage source. With simple pulsewidth modulated (PWM) control, the capacitor voltages are inherently balanced under different loading conditions. Furthermore, for 11 switches, only seven independent switching signals are required. Loss analysis reveals that the proposed SCMLI has significantly reduced conduction losses, capacitor ripple voltage, voltage stress, and cost function (CF) when compared with other topologies available in the literature. Finally, the simulation results are obtained at different loads and modulation indexes. The results are experimentally validated with a scaled-down laboratory prototype. © 2024 Institute of Electrical and Electronics Engineers Inc.. All rights reserved.
  • Item
    An Inductorless Triple Boost 13-Level Switched Capacitor Inverter with Reduced Ripple Current
    (Institute of Electrical and Electronics Engineers Inc., 2024) Ahmed, M.S.; Raushan, R.; Ahmad, M.W.
    Switched capacitor (SC) multilevel inverter (SCMLI) is a promising alternative to traditional voltage source inverters for industrial and renewable energy applications. In SCMLI, capacitors are used in a specific sequence during charging and discharging either in parallel or series with the source for level generation. During the charging period of the capacitor, a large ripple current is generated. This ripple may cause an increase in the peak current and ripple voltage of the capacitors. The reliability and life expectancy of the inverter can be severely affected by this ripple current of the capacitor. This article proposes an inductorless self-balance single-phase 13-level inverter with triple boosting capability. It aims to reduce the ripple current in both the source and capacitors by arranging the switching sequence in a particular fashion to implement a partial charging technique in the capacitors. Furthermore, it results in better efficiency and reduced current stress without the need for any source inductance or a complicated control algorithm. The performance of the proposed inverter is verified through its laboratory prototype under dynamic load conditions and varying modulation indexes. © 1986-2012 IEEE.