Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Aditya Kudva, S.Subject: search.filters.subject.Corrosive effects

Search Results

Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Optimization of ball-burnishing process parameters on surface roughness, micro hardness of Mg-Zn-Ca alloy and investigation of corrosion behavior
    (Institute of Physics Publishing helen.craven@iop.org, 2019) Ramesh, S.; Aditya Kudva, S.; Anne, G.; Manne, B.; Arya, S.
    In this work, optimization of ball burnishing parameters (depth of press, feed, burnishing force, number of passes) and their effect on surface roughness, microhardness and corrosion behavior of Mg-4%Zn-1%Ca alloy is investigated. The Taguchi optimization technique was used to determine the number of experiments and by considering S/N ratios, right combination of ball burnishing parameters were selected. Results obtained from the experiments were investigated and it is understood that depth of press, feed and number of passes have a significant effect on surface roughness, microhardness and consequently improves corrosion resistance of Mg-4%Zn-1%Ca alloy. From ball burnishing experiments it is deduced that there is large increase in microhardness of 107 Hv and surface roughness of 129 nm, achieved for the depth of press 0.45 mm, burnishing force 250 N, feed 450 mm min-1 and number of passes: 2. Corrosion behavior of the alloys were analyzed using potentiodynamic polarization and electrochemical impedance spectroscopy techniques in Hank's balanced salt solution. The lowest corrosion rate was observed in DFN 442 sample (1.43 mm y-1) which is 4.7 times better than the homogenized alloy (6.73 mm y-1). It has been found that the ball burnishing plays an important role on surface roughness, microhardness and corrosion behavior of Mg-4%Zn-1%Ca alloy. © 2019 IOP Publishing Ltd.
  • No Thumbnail Available
    Item
    Effect of addition of Ce and accumulative roll bonding on structure-property of the Mg-Ce-Al hybrid composite and its prediction and comparison using artificial neural network (ANN) approach
    (Institute of Physics, 2024) Anne, G.; Bhat, N.; Vishwanatha, H.M.; Ramesh, S.; Maruthi Prashanth, B.H.; Sharma, P.; Aditya Kudva, S.; Jagadeesh, C.; Nanjappa, Y.
    Light alloys play a crucial role in realizing the national strategy for energy conservation and emission reduction, as well as promoting the upgrading of manufacturing industries. Mg/Al composite laminates combine the corrosion resistance and ductility of aluminium alloy with the lightweight characteristics of magnesium alloy. The addition of Ce (rare earth elements) can improve the mechanical properties of magnesium via grain refinement and improve the ductility of the hybrid composites. In the present work, an investigation on addition of Ce into the Mg/Al matrix through Accumulative Roll Bonding (ARB) has been presented. The Mg/Ce/Al hybrid composite consists of Mg-4%Zn alloy and Al 1100 alloy with 0.2% Ce particles added between the dissimilar layers. The changes occurred in the evaluation of microstructure, corrosion and mechanical properties of the Mg/Ce/Al hybrid composite as a result of deformation process and also the addition of Ce have been explicated. The ARB parameters: temperature, rolling speed, percentage reduction, and aging time, have been studied. An increase of about 2.36 times in strength and hardness of the hybrid composite, has been reported. Further, the structure-property relations in the Mg/Ce/Al hybrid composites were aslo predict and compare using machine learning models: Decision Tree and Multi-Layer Perceptron (MLP) models. © 2024 The Author(s). Published by IOP Publishing Ltd.