Faculty Publications

Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736

Publications by NITK Faculty

Browse

Author: search.filters.author.Aditya, K.Subject: search.filters.subject.Transformer

Search Results

Now showing 1 - 7 of 7
  • No Thumbnail Available
    Item
    Design of a New Single-Phase 15-Level Inverter with Minimized Components
    (Institute of Electrical and Electronics Engineers Inc., 2023) Nageswar Rao, B.N.; Yellasiri, Y.; Shiva Naik, B.S.; Aditya, K.; Karunakaran, E.; Kumar, M.V.
    Multilevel inverters (MLI) provide a number of challenges, the most significant of which is the requirement for a high number of power semiconductors and separate dc supplies to assimilate renewable energy into a grid successfully. Because of this, reducing the number of components used in these kinds of inverters is quite important. Because transformer-based multilevel inverters (TBMIs) have become more commonplace, the use of many dc supplies in the cascaded inverter is no longer necessary for the device to function. Based on the outcomes of this study, a new transformer-based MLI with fifteen levels (15L) and eight switches can be built with only one dc source required. The suggested MLI consists of three isolated transformers. The suggested MLI structure has many unique benefits, including the use of fewer switching components and the availability of self-galvanic isolation. The MATLAB simulation results are carried out to evaluate the effectiveness of the suggested TBMLI. In addition, a comparison of the suggested structure to other recent configurations is presented. © 2023 IEEE.
  • No Thumbnail Available
    Item
    A novel single source multilevel inverter with hybrid switching technique
    (John Wiley and Sons Ltd, 2022) Nageswar Rao, B.; Yellasiri, Y.; Shiva Naik, B.; Venkataramanaiah, J.; Aditya, K.; Panda, A.
    A novel multilevel inverter (MLI) configuration with the hybrid switching technique is presented in this paper. The proposed MLI consists of the H-bridge combination with unidirectional switches, half-bridges, and transformers. The suggested MLI with the additional cascaded connection increases to higher voltage levels. The number of employed components in this topology is drastically minimized. Therefore, the complexity, cost, and volume of the proposed topology are also reduced. The operation of the suggested topology is tested through the improved novel switching technique. This modulation method reduces the total harmonic distortion (THD) and produces high root mean square (RMS) voltage. Further, a comprehensive comparison with the recent MLI topologies is performed to validate the merits of the suggested inverter. Simulation and experimental results verify the suggested topology performance using the new modulation technique at different loading conditions and modulation indices. © 2021 John Wiley & Sons, Ltd.
  • No Thumbnail Available
    Item
    A novel nine-level inverter with reduced component count using common leg configuration
    (Springer Science and Business Media Deutschland GmbH, 2023) Nageswar Rao, B.; Yellasiri, Y.; Shiva Naik, B.S.; Aditya, K.
    This article proposes a nine-level (9 L) inverter with a common leg configuration employing transformers and a single dc source. The suggested inverter uses eight switches and two transformers to produce 9 L output voltage. The suggested circuit minimizes the switches and transformers compared with existing transformer-based multilevel inverters (TMLI). Therefore, the proposed circuit cost, volume and complexity are also reduced. Additionally, a thorough comparison with the various 9 L inverter circuits is conducted to ensure the benefits of the suggested TMLI. A basic logic gate-based pulse width modulation (PWM) is implemented for the suggested 9 L inverter. Simulation and hardware studies verifying the feasibility and proficiency of the suggested inverter are performed. © 2023, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.
  • No Thumbnail Available
    Item
    A new single-phase multilevel inverter with improved modulation technique
    (John Wiley and Sons Ltd, 2023) Nageswar Rao, B.; Yellasiri, Y.; Shiva Naik, B.; Aditya, K.; K Panda, A.
    This article proposes a seventeen-level (17L) inverter with a common leg configuration and an improved modulation technique. The proposed inverter uses only 10 switches, one toroidal core transformer, and one dc source. Therefore, the proposed design offers less control complexity with reduced cost and volume. Additionally, the suggested modulation technique improves the load voltage quality by minimizing the harmonic content. Simulation and laboratory studies are performed to confirm the proficiency of the suggested inverter with a new modulation technique. Further, a thorough comparison with recent transformer-based circuits is carried out to highlight the benefits of the proposed structure. © 2023 John Wiley & Sons Ltd.
  • No Thumbnail Available
    Item
    A modified T-type multilevel inverter for renewable energy applications
    (Elsevier Ltd, 2024) Nageswar Rao, B.; Yellasiri, Y.; Shiva Naik, B.S.; Aditya, K.; Panda, A.K.
    The primary challenge in integrating renewable resources into grids using multilevel inverters (MLI) is the need for many separate DC sources and switching device counts. Transformer-based multilevel inverters (TMIs) have emerged to address this issue, aiming to minimize system components and boost source voltage with a single DC source. This research article introduces a novel TMI topology that utilizes only a single DC source and incorporates ten switches to produce good-quality load voltage with high magnitude. The proposed TMI offers several structural advantages, including self-galvanic isolation, reduced switching devices and uniform voltage levels across all turn ratios. Additionally, the TMI operates a switching method called pulse width modulation, which provides the gating pulses to all the power semiconductor devices in the proposed TMI. An experimental model has been created in a laboratory environment, and simulations are performed using the MATLAB/Simulink platform to assess the effectiveness of the suggested TMI. Furthermore, a comparison between the suggested TMI circuit and other recent TMI designs with similar characteristics is performed. This comparison is carried out to assess and validate the superior features of the proposed TMI over the alternative designs. © 2024 Elsevier B.V.
  • No Thumbnail Available
    Item
    Implementation of novel toroidal transformer-based single-phase multilevel inverter
    (Springer Science and Business Media Deutschland GmbH, 2024) Nageswar Rao, B.; Yellasiri, Y.; Shiva Naik, B.; Aditya, K.
    Multilevel inverters (MLIs) have gained traction for their application in high-voltage AC systems and renewable energy. They use fewer DC sources and switches in transformer-based designs to attain the necessary output voltage magnitude. Creating an efficient, high-gain MLI with reduced sources and switches demands meticulous design and substantial effort. This paper introduces a new multilevel inverter design utilizing a toroidal transformer with a reduced number of components. The new topology incorporates ten transistors and a single toroidal transformer. These components are arranged as two H-bridge modules and a bidirectional switch with a transformer to generate nine voltage levels. Notably, the inclusion of three complementary switch pairs in the inverter circuit simplifies the control strategy of the proposed inverter. This configuration enables the inverter to achieve more voltage levels and higher voltage gain using fewer components. Comparison with other existing nine-level inverters highlights the effectiveness of the new design in minimizing the cost function value. The performance assessment of the proposed inverter employs a cost-effective solution. Simulation and experimental results are provided to showcase the practicality and efficiency of the proposed nine-level inverter. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2024.
  • No Thumbnail Available
    Item
    Design and implementation of novel multilevel inverter with full DC-utilization
    (Taylor and Francis Ltd., 2025) Nageswar Rao, B.; Yellasiri, Y.; Aditya, K.; Shiva Naik, B.S.; Karunakaran, E.
    This paper presents a novel single-source transformer-based nine-level (9 L) inverter configuration. The design incorporates a three-level neutral-point-clamped (3 L NPC) inverter, a 3-L full bridge, and a transformer to produce 9 L output voltage levels. In particular, one of the 2 L legs in the full bridge is common among the transformer and the load. The proposed structure minimises the components compared to existing transformer-based nine-level inverters. Thus, the suggested inverter volume, cost, and complexity are minimised. Furthermore, a pulse width modulation method has been developed to generate the necessary gating pulses for the proposed inverter. Additionally, a complete comparison study illustrates the enhanced performance of the suggested architecture. The validity of the suggested 9 L inverter is assessed by performing MATLAB simulations and using a scaled prototype. The results obtained from the simulations and experimental tests are then presented and analysed. A clear correlation was observed between the simulation and the hardware results. © 2024 Informa UK Limited, trading as Taylor & Francis Group.