Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
2 results
Search Results
Item Investigation of magnetorheological brake with rotor of combined magnetic and non-magnetic materials(Springer Nature, 2019) Acharya, S.; Kumar, H.Magnetorheological (MR) brakes are a type of electromagnetic brakes that make use of controllable viscoelastic properties of magnetorheological fluid for braking. The torque capacity of the MR brake depends on the magnitude of magnetic flux density generated in the MR fluid. In this study, the effect of combination of magnetic and non-magnetic materials for rotor disk of MR brake with the objective to maximizing the flux density in the MR fluid gap at the rotor periphery was investigated. Initially, the MR brake rotor disk radius and MR fluid gap thickness were determined by using Genetic Algorithm optimization technique for desired torque ratio and torque capacity. Magnetostatic analyses were performed at different current magnitudes to determine the magnetic field and flux density in the MR brake. Further, to enhance the magnetic field intensity in the MR fluid at the rotor periphery, the rotor was modeled with three different configurations of MR brake with combinations of magnetic and non-magnetic steel and magnetostatic analyses of the MR brake were performed. It was found that the leakage of flux away from rotor periphery was reduced and there is significant increase and concentration of the magnetic field and flux density in the MR fluid gap through the use of rotor disk with combined magnetic and non-magnetic materials which would subsequently increase the torque capacity of the MR brake. © 2019, Springer Nature Switzerland AG.Item Selection of optimal composition of MR fluid for a brake designed using MOGA optimization coupled with magnetic FEA analysis(SAGE Publications Ltd, 2021) Acharya, S.; Saini, T.R.S.; Sundaram, V.; Kumar, H.The design of Magnetorheological (MR) brake and the composition of MR fluid (MRF) used in it have a significant effect on its performance and hence an effort has been made in this study to determine the optimal dimensions of MR brake and composition of MRF suitable for the brake application. Initially, optimum parameters of MR brake were computed considering the properties of commercially available MRF 132DG fluid using multi-objective genetic algorithm (MOGA) optimization. This was performed in MATLAB software coupled with magnetostatic analyses in ANSYS APDL software. The braking torque of designed MR brake utilizing MRF 132DG fluid was experimentally determined and validated with analytical ones. Further, selection of optimal composition of MRF was done considering In-house MRF samples composed of different combinations of particle mass fractions, mean particle diameters and base oil viscosities. A design of experiments (DOE) technique was employed and braking torque corresponding to the synthesized MRF samples at different speeds and current supplied were measured along with the variation of shaft speed during braking process. Grounded on the experimental results, using MOGA optimization technique, MRF composed of smaller sized iron particles (2.91 microns) with mass fraction of 80.95% and lower viscosity base oil (50 cSt) was selected as optimal composition of MRF for use in MR brake. Maximization of field induced braking torque and minimization of off-state torque were chosen as the objective functions for both the optimal design of MR brake and selection of optimal composition of MRF. Finally, the sedimentation stability of MRFs were investigated. © The Author(s) 2020.