Faculty Publications

Now showing 1 - 3 of 3

Investigation of magnetorheological brake with rotor of combined magnetic and non-magnetic materials
(Springer Nature, 2019) Acharya, S.; Kumar, H.
Magnetorheological (MR) brakes are a type of electromagnetic brakes that make use of controllable viscoelastic properties of magnetorheological fluid for braking. The torque capacity of the MR brake depends on the magnitude of magnetic flux density generated in the MR fluid. In this study, the effect of combination of magnetic and non-magnetic materials for rotor disk of MR brake with the objective to maximizing the flux density in the MR fluid gap at the rotor periphery was investigated. Initially, the MR brake rotor disk radius and MR fluid gap thickness were determined by using Genetic Algorithm optimization technique for desired torque ratio and torque capacity. Magnetostatic analyses were performed at different current magnitudes to determine the magnetic field and flux density in the MR brake. Further, to enhance the magnetic field intensity in the MR fluid at the rotor periphery, the rotor was modeled with three different configurations of MR brake with combinations of magnetic and non-magnetic steel and magnetostatic analyses of the MR brake were performed. It was found that the leakage of flux away from rotor periphery was reduced and there is significant increase and concentration of the magnetic field and flux density in the MR fluid gap through the use of rotor disk with combined magnetic and non-magnetic materials which would subsequently increase the torque capacity of the MR brake. © 2019, Springer Nature Switzerland AG.
Determination of optimal magnetorheological fluid particle loading and size for shear mode monotube damper
(Springer Verlag service@springer.de, 2019) Acharya, S.; Saini, R.S.S.; Kumar, H.
Magnetorheological (MR) fluids belong to a class of controllable fluids, and the composition and concentration of its components govern its magnetorheological properties. In this study, an optimum particle loading (or mass fraction) and size of iron particles in MR fluid for use in a shear mode monotube MR damper were determined based on the damping force and off-state viscosity of synthesized MR fluid samples. Initially, the morphological and magnetic properties of carbonyl iron particles were characterized. Six MR fluid samples were prepared composed of combination of three different particle loadings and two sizes of iron particles. Magnetorheological tests were conducted on these samples to determine the flow curves at off-state and on-state magnetic field conditions. Herschel–Bulkley model was used for mathematical representation of flow curves at different magnetic fields and to determine their dynamic yield stress. Further, a shear mode monotube MR damper with accumulator was designed by using optimization technique for desired dynamic range and damping force. Magnetostatic analysis was performed to determine the magnetic field strength generated in the shear gap at different currents. The damping force was calculated for synthesized MR fluids based on their dynamic yield stress corresponding to the magnetic field strength in the shear gap. Analysis of variance was performed to analyse the significance of independent factors on the damping force and off-state viscosity of MRF. The optimal particle loading and size which yielded maximum damping force with minimum off-state viscosity were determined using a multi-objective genetic algorithm. © 2019, The Brazilian Society of Mechanical Sciences and Engineering.
Selection of optimal composition of MR fluid for a brake designed using MOGA optimization coupled with magnetic FEA analysis
(SAGE Publications Ltd, 2021) Acharya, S.; Saini, T.R.S.; Sundaram, V.; Kumar, H.
The design of Magnetorheological (MR) brake and the composition of MR fluid (MRF) used in it have a significant effect on its performance and hence an effort has been made in this study to determine the optimal dimensions of MR brake and composition of MRF suitable for the brake application. Initially, optimum parameters of MR brake were computed considering the properties of commercially available MRF 132DG fluid using multi-objective genetic algorithm (MOGA) optimization. This was performed in MATLAB software coupled with magnetostatic analyses in ANSYS APDL software. The braking torque of designed MR brake utilizing MRF 132DG fluid was experimentally determined and validated with analytical ones. Further, selection of optimal composition of MRF was done considering In-house MRF samples composed of different combinations of particle mass fractions, mean particle diameters and base oil viscosities. A design of experiments (DOE) technique was employed and braking torque corresponding to the synthesized MRF samples at different speeds and current supplied were measured along with the variation of shaft speed during braking process. Grounded on the experimental results, using MOGA optimization technique, MRF composed of smaller sized iron particles (2.91 microns) with mass fraction of 80.95% and lower viscosity base oil (50 cSt) was selected as optimal composition of MRF for use in MR brake. Maximization of field induced braking torque and minimization of off-state torque were chosen as the objective functions for both the optimal design of MR brake and selection of optimal composition of MRF. Finally, the sedimentation stability of MRFs were investigated. © The Author(s) 2020.

Faculty Publications

Browse

Filters

Settings

Sort By

Results per page

Search Results