Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
6 results
Search Results
Item Investigation of magnetorheological brake with rotor of combined magnetic and non-magnetic materials(Springer Nature, 2019) Acharya, S.; Kumar, H.Magnetorheological (MR) brakes are a type of electromagnetic brakes that make use of controllable viscoelastic properties of magnetorheological fluid for braking. The torque capacity of the MR brake depends on the magnitude of magnetic flux density generated in the MR fluid. In this study, the effect of combination of magnetic and non-magnetic materials for rotor disk of MR brake with the objective to maximizing the flux density in the MR fluid gap at the rotor periphery was investigated. Initially, the MR brake rotor disk radius and MR fluid gap thickness were determined by using Genetic Algorithm optimization technique for desired torque ratio and torque capacity. Magnetostatic analyses were performed at different current magnitudes to determine the magnetic field and flux density in the MR brake. Further, to enhance the magnetic field intensity in the MR fluid at the rotor periphery, the rotor was modeled with three different configurations of MR brake with combinations of magnetic and non-magnetic steel and magnetostatic analyses of the MR brake were performed. It was found that the leakage of flux away from rotor periphery was reduced and there is significant increase and concentration of the magnetic field and flux density in the MR fluid gap through the use of rotor disk with combined magnetic and non-magnetic materials which would subsequently increase the torque capacity of the MR brake. © 2019, Springer Nature Switzerland AG.Item Determination of optimal magnetorheological fluid particle loading and size for shear mode monotube damper(Springer Verlag service@springer.de, 2019) Acharya, S.; Saini, R.S.S.; Kumar, H.Magnetorheological (MR) fluids belong to a class of controllable fluids, and the composition and concentration of its components govern its magnetorheological properties. In this study, an optimum particle loading (or mass fraction) and size of iron particles in MR fluid for use in a shear mode monotube MR damper were determined based on the damping force and off-state viscosity of synthesized MR fluid samples. Initially, the morphological and magnetic properties of carbonyl iron particles were characterized. Six MR fluid samples were prepared composed of combination of three different particle loadings and two sizes of iron particles. Magnetorheological tests were conducted on these samples to determine the flow curves at off-state and on-state magnetic field conditions. Herschel–Bulkley model was used for mathematical representation of flow curves at different magnetic fields and to determine their dynamic yield stress. Further, a shear mode monotube MR damper with accumulator was designed by using optimization technique for desired dynamic range and damping force. Magnetostatic analysis was performed to determine the magnetic field strength generated in the shear gap at different currents. The damping force was calculated for synthesized MR fluids based on their dynamic yield stress corresponding to the magnetic field strength in the shear gap. Analysis of variance was performed to analyse the significance of independent factors on the damping force and off-state viscosity of MRF. The optimal particle loading and size which yielded maximum damping force with minimum off-state viscosity were determined using a multi-objective genetic algorithm. © 2019, The Brazilian Society of Mechanical Sciences and Engineering.Item Synthesis of magnetorheological fluid and its application in a twin-tube valve mode automotive damper(SAGE Publications Ltd info@sagepub.co.uk, 2020) Madhavrao Desai, R.; Acharya, S.; Jamadar, M.-E.-H.; Kumar, H.; Joladarashi, S.; Sekaran, S.C.R.The change in rheological properties of smart materials like magnetorheological fluid when brought under the influence of a magnetic field can be utilized to develop magnetorheological devices where the output has to be continuously and quickly varied using electronic control interface. In the present study, magnetorheological fluid is synthesized and used as a smart fluid in a twin-tube magnetorheological damper operating in valve mode. The behavior of the magnetorheological fluid is experimentally characterized in a rheometer and mathematically modeled using Herschel–Bulkley model. The parameters of the Herschel–Bulkley model are expressed as polynomial functions of strength of the magnetic field in order to find the shear stress developed by the magnetorheological fluid at any given strength of the magnetic field applied. The magnetorheological damper, which was designed for application in a passenger van, is tested in the damper testing machine. The performance of the damper at different damper velocities and current supplied is studied. The range of values for the parameters of the experimental testing are chosen to emulate the actual conditions of operation in its intended application. Nondimensional analysis is performed, which links magnetorheological fluid rheological properties and geometrical parameters of magnetorheological damper design with the force developed by the damper. Finite element method magnetics is used to find the strength of the magnetic field at the fluid flow gap. Analytical methods are used to calculate the damper force developed due to the field-dependent yield stress and compared with experimental force values. The resulting dynamic range of the magnetorheological damper is also assessed. © The Author(s) 2020.Item Dynamic behavior of sandwich beams with different compositions of magnetorheological fluid core(Taylor and Francis Ltd., 2021) Acharya, S.; Allien, V.J.; Puneet, P.; Kumar, H.Magnetorheological fluid (MRF) sandwich beams belong to a class of adaptive beams that consists of MRF sandwiched between two or more face layers and have a great prospective for use in semi-active control of beam vibrations due to their superior vibration suppression capabilities. The composition of MRF has a strong influence on the MRF properties and hence affects the vibration characteristics of the beam. In this work, six MRF samples (MRFs) composed of combination of two particle sizes and three weight fractions of carbonyl iron powder (CIP) were prepared and their viscoelastic properties were measured. The MRFs were used to fabricate different MRF core sandwich beams. Additionally, a sandwich beam with commercially available MRF 132DG fluid as core was fabricated. The modal parameters of the cantilever MRF sandwich beams were determined at different magnetic fields. Further, sinusoidal sweep excitation tests were performed on these beams at different magnetic fields to investigate their vibration suppression behavior. MRF having larger particle size and higher weight fraction of CIP resulted in higher damping ratio and vibration suppression. Finally, optimal particle size and weight fraction of CIP were determined based on the maximization of damping ratio and minimization of weight of MRF. © 2021 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.Item Selection of optimal composition of MR fluid for a brake designed using MOGA optimization coupled with magnetic FEA analysis(SAGE Publications Ltd, 2021) Acharya, S.; Saini, T.R.S.; Sundaram, V.; Kumar, H.The design of Magnetorheological (MR) brake and the composition of MR fluid (MRF) used in it have a significant effect on its performance and hence an effort has been made in this study to determine the optimal dimensions of MR brake and composition of MRF suitable for the brake application. Initially, optimum parameters of MR brake were computed considering the properties of commercially available MRF 132DG fluid using multi-objective genetic algorithm (MOGA) optimization. This was performed in MATLAB software coupled with magnetostatic analyses in ANSYS APDL software. The braking torque of designed MR brake utilizing MRF 132DG fluid was experimentally determined and validated with analytical ones. Further, selection of optimal composition of MRF was done considering In-house MRF samples composed of different combinations of particle mass fractions, mean particle diameters and base oil viscosities. A design of experiments (DOE) technique was employed and braking torque corresponding to the synthesized MRF samples at different speeds and current supplied were measured along with the variation of shaft speed during braking process. Grounded on the experimental results, using MOGA optimization technique, MRF composed of smaller sized iron particles (2.91 microns) with mass fraction of 80.95% and lower viscosity base oil (50 cSt) was selected as optimal composition of MRF for use in MR brake. Maximization of field induced braking torque and minimization of off-state torque were chosen as the objective functions for both the optimal design of MR brake and selection of optimal composition of MRF. Finally, the sedimentation stability of MRFs were investigated. © The Author(s) 2020.Item Synthesis, characterization and selection of optimal constituents of magnetorheological fluid for damper application(National Institute of Science Communication and Policy Research, 2025) Acharya, S.; Puneet, N.P.; Desai, R.M.; Sundaram, V.; Kumar, H.Magnetorheological (MR) dampers are a category of energy dissipating devices that employ magnetorheological fluids which undergoes drastic change in its behaviour under the presence of magnetic stimulus. The damping characteristics of an MR damper predominantly depends on the dimensions of damper and on the constituents of MR fluid (MRF). In this work, an optimal MRF composition suitable for a monotube MR damper has been selected from six prepared MRF based on optimization. Initially, MR damper piston dimensions have been obtained by means of optimization. The damper has been fabricated and filled with commercial MRF 132DG™ fluid (Lord Corporation) and its performance has been tested. The experimental results have been validated with computational results. In the next part of the study, MRF samples composed of three particle weight fractions of fine and coarse sized iron particles have been synthesized and the rheological properties have been measured and compared with those of commercial MR fluid. The force-displacement characteristics of damper employing synthesized MRF have been determined with and without application of current to damper coil. Finally, by means of Multi-Objective Genetic Algorithm, optimum iron particle size and weight fraction have been selected from the pareto front solutions. © 2025, National Institute of Science Communication and Policy Research. All rights reserved.