Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
3 results
Search Results
Item Superior supercapacitance exhibited by acid insoluble Ni(OH)2 in the form of its nanocomposite with rGO(Elsevier Ltd, 2022) Viswanathan, A.; Acharya, M.G.; Prakashaiaha, B.G.; Nityananda Shetty, A.N.The solubility of Ni(OH)2 in acids was been the major impediment that has been preventing the usage of acid electrolytes like 1 M H2SO4 in supercapacitors and batteries that contain Ni(OH)2 as electrode material. This impediment is successfully removed and impressive energy storage characters were achieved from an electrode made up of Ni(OH)2 in the presence of acid electrolyte of 1 M H2SO4. This acid insoluble form of Ni(OH)2 was achieved by synthesizing it in situ in the presence of graphene oxide by chemical reduction method to produce the stable nanocomposite of reduced graphene oxide (rGO) and Ni(OH)2. The insolubility of Ni(OH)2 in 1 M H2SO4 was carefully studied for nearly six months and proved to be a factual observation. Remarkably, the rGO/Ni(OH)2 composite exhibited the better energy storage performance in the presence of 1 M H2SO4 in relation with conventional methods that involve basic electrolytes like NaOH and KOH for Ni(OH)2. The supercapacitor containing rGO/Ni(OH)2 composite and 1 M H2SO4, was stable in storing and delivering the energy without deterioration up to 31,500 cycles, with an uniqueness of increase in energy storage with increase in cycles of energy storage and delivery. Remarkably, two type of faradaic processes are observed to be contributing to the total energy storage of Ni(OH)2, of which one is unprecedented. The superior specific energy (E) and specific capacitance (Cs) achieved are 130.7175 W h kg−1 (comparable with Li-ion batteries of 3 V) and 653.5947 F g−1 at 1 A g−1. This superior Cs is higher than the theoretical Cs expected from this composite for this specific composition (rGO33.33 % and Ni(OH)2 66.66 %) (1571 F g−1) and higher than the theoretical Cs of Ni(OH)2 (2082 F g−1). It is expected that this study would be an inevitable attraction and take the applicability of Ni(OH)2 to higher level and make it one of the meritorious materials for future energy storage. © 2022 Elsevier LtdItem Experimental and Theoretical Studies on an Anionic Gemini Surfactant as Corrosion Inhibitor for AZ31 Magnesium Alloy(Springer Science and Business Media Deutschland GmbH, 2022) Acharya, M.G.; Nityananda Shetty, A.N.Abstract: Sodium 2,2′-(13,22-dimethyl-14,21-dioxo-13,16,19,22-tetraazatetratriacontane-16,19-diyl)diacetate anionic Gemini surfactant was synthesized and utilized as a corrosion inhibitor for AZ31 alloy. The corrosion inhibition property was investigated using electrochemical methods. The surface investigation of the alloy was achieved using SEM–EDX and XPS. The strength of inhibitor to inhibit corrosion depends on the surfactant concentration, the higher inhibition efficiency was exhibited when the surfactant concentration was higher. The inhibitor appeared as a mixed-type inhibitor. The inhibiting effect of Gemini surfactant showed rapid adsorption on the alloy surface. The experimental results were related to the theoretical findings obtained from the studies based on density function theory (DFT). Graphical Abstract: [Figure not available: see fulltext.]. © 2022, The Author(s), under exclusive licence to Springer Nature Switzerland AG.Item Performance of anionic dimeric surfactant on AZ31 Magnesium alloy in neutral medium unveiled through experimental and theoretical investigation(Springer, 2024) Acharya, M.G.; Nityananda Shetty, A.N.The synthesis of a novel eco-friendly anionic Gemini surfactant, pursuing three parameters of green chemistry: economic, environmental factor, and mass reaction efficiency is developed as a corrosion inhibitor for AZ31 Mg alloy. Herein, the corrosion inhibition ability of novel EDTA-based dimeric surfactant on AZ31 Mg alloy in corrosive media with varying concentrations of NaCl and Na2SO4 at temperatures between 30–50 °C were studied. The surfactant’s molecular structure is affirmed by FT-IR, NMR, and LC–MS techniques. Electrochemical techniques and surface morphology were employed to evaluate the corrosion inhibition efficiency. The inhibitor studied exhibited appreciable corrosion inhibition at 30 °C. The surfactant shows physical adsorption as per the data obtained in the Gibbs free energy and enthalpy of adsorption studies. The adsorption of the inhibitor was found to be a film-like layer on the surface of AZ31 Mg alloy and, is confirmed by SEM–EDX and XPS techniques. In addition, theoretical simulations were performed to compare with experimental results. Conclusively, the work provides a deeper understanding of the intricacies involved in the development of a new anionic dimeric surfactant as an effective corrosion inhibitor. © The Author(s) 2024.