Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
7 results
Search Results
Item Improvement in performance of N3 sensitized DSSCs with structurally simple aniline based organic co-sensitizers(Elsevier Ltd, 2018) Naik, P.; Abdellah, I.M.; Abdel-Shakour, M.; Su, R.; Keremane, K.S.; El-Shafei, A.; Vasudeva Adhikari, A.V.In this work, we report comprehensive photovoltaic investigation of four structurally simple D-A configured organic dyes, A1-4 as active co-sensitizers in DSSCs sensitized with well-known Ru (II) based N3 dye. These effective co-sensitizers (A1-4) comprise N,N-dimethylaniline ring as donor scaffold linked with electron withdrawing functionalities, viz. barbituric acid (A1), N,N-dimethyl barbituric acid (A2), thiobarbituric acid (A3), and N,N-diethyl thiobarbituric acid (A4) as acceptor/anchoring units. In the present study, for the first time we have demonstrated the profound role of various simple organic molecules carrying different heterocyclic anchoring units on the photovoltaic parameters of the N3 sensitized devices. Also, the effect of concentration of sensitizer/co-sensitizers on the device performance characteristics has been investigated in depth. From the results, it is evident that, the device fabricated using co-sensitizer A2 carrying N,N-dimethyl barbituric acid along with sensitizer N3 in all concentrations outperformed when compared to N3 alone or other co-sensitizers. Interestingly, the best photovoltaic performance was obtained for the co-sensitized device fabricated using 0.3 mM co-sensitizer A2 along with 0.2 mM of N3 sensitizer. It displayed PCE of 7.02% with JSC of 15.27 mA·cm?2, VOC of 0.671 V and FF of 68.47%. Thus, the observed results have thrown new light upon the device optimization to yield DSSCs with improved performance by the selection of matchable co-sensitizers at appropriate concentrations. © 2018 Elsevier LtdItem An Efficient Aniline-Based Co-Sensitizer for High Performance N3-Sensitized Solar Cells(Wiley-Blackwell info@wiley.com, 2018) Naik, P.; Abdellah, I.M.; Abdel-Shakour, M.; Acharaya, M.; Pilicode, N.; El-Shafei, A.; Vasudeva Adhikari, A.V.In this work, we report a comprehensive photovoltaic investigation of a structurally simple Donor-Acceptor (D?A) configured organic dye, N,N-PABA as an active co-sensitizer in DSSCs sensitized with well-known Ru (II) based N3 dye. This effective co-sensitizer (N,N-PABA) comprises N,N-dimethylaniline system as a donor scaffold linked with 4-aminobenzoic acid as an electron withdrawing functionality. In the present study, we have demonstrated the profound effect of concentration of sensitizer, i. e. N3 based dye as well as co-sensitizer, i. e. N,N-PABA on the photovoltaic performance characteristics of solar cells. Interestingly, the best photovoltaic performance was obtained for the co-sensitized device fabricated using 0.2 mM of N,N-PABA along with 0.3 mM of N3 sensitizer, in presence of 20 mM of CDCA. It displayed power conversion efficiency (PCE) of 5.82% with JSC of 14.35 mA.cm?2, VOC of 0.626 V and FF of 64.85%. Here, the N,N-PABA effectively filled the absorption valley, avoided the dye aggregation and reduced the charge recombination in the co-sensitized devices. Thus, the results ameliorate the role of efficient co-sensitizers to yield DSSC with improved performance by the selection of a matchable co-sensitizer at an appropriate concentration. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, WeinheimItem Simple diphenylamine based D-?-A type sensitizers/co-sensitizers for DSSCs: A comprehensive study on the impact of anchoring groups(Royal Society of Chemistry, 2019) Kesavan, R.; Abdellah, I.M.; Singh, S.P.; El-Shafei, A.; Vasudeva Adhikari, A.V.Herein, we report the design, synthesis and characterization of a new series of simple donor-? spacer-acceptor/anchor (D-?-A) type diphenylamine based metal-free organic dyes possessing three different anchoring groups, viz. 4-aminobenzoic acid (DTP), 2-(4-nitrophenyl)acetonitrile (DTN), and barbituric acid (DTB), connected with 2-(thiophene-2-yl)-acetonitrile, as effective sensitizers and co-sensitizers in Dye Sensitized Solar Cells (DSSCs). They were subjected to photophysical, electrochemical and theoretical studies. The dyes exhibited characteristic ?abs and ?emi in the range of 445-485 and 545-570 nm, respectively. Both optical and electrochemical band gaps were found to be in the range of 2.2 to 2.35 eV. The driving forces for injection (?Ginj), recombination (?Grec) and regeneration (?Greg) processes were evaluated to understand their feasibility. Finally, the DSSC devices were fabricated employing the new dyes as sensitizers as well as co-sensitizers along with the Ru(ii) based N3 dye. Interestingly, DTP carrying 4-aminobenzoic acid as the anchoring group shows the best photoelectrochemical performance, viz. photovoltaic conversion efficiency (PCE) = 4.4%, open circuit potential (VOC) = 0.577 V, and short-circuit current density (JSC) = 9.06 mA cm-2 with a broad incident photon conversion efficiency (IPCE) spectrum. Co-sensitization of the dyes brought about enhanced VOC values, compared to the N3 dye alone. Finally, different interface resistance values obtained from the electrochemical impedance spectroscopy (EIS) circuit fitting were used to study the fundamental processes of energy conversion. © 2019 the Owner Societies.Item Simple thiophene-bridged D-?-A type chromophores for DSSCs: a comprehensive study of their sensitization and co-sensitization properties(Royal Society of Chemistry, 2020) Keremane, K.S.; Abdellah, I.M.; Naik, P.; El-Shafei, A.; Vasudeva Adhikari, A.V.Herein, we report the design and synthesis of four new thiophene-bridged D-?-A configured organic dyes T1-4 comprising different donors, ?-spacers and anchoring units, as potential sensitizers and co-sensitizers for DSSCs. The current work also highlights their structural, photophysical, thermal, electrochemical, theoretical, and photoelectrochemical studies, including evaluation of their structure-property relationships. The optical results revealed that the dyes T1-4 display ?abs and ?emi in the range of 402-461 nm and 556-575 nm, respectively, with a bandgap in the order of 2.31-2.58 eV. Furthermore, the results showed that the dyes possess all the pre-requisites to act as sensitizers/co-sensitizers. Among the tested dyes, the device based on sensitizer T2 achieved the highest PCE compared to the other three dyes, under the standard conditions. Furthermore, their co-sensitized devices were fabricated by co-adsorbing them with the well-known Ru-based MH-12 sensitizer and interestingly the co-sensitizer T3 carrying an alkoxy group and a barbituric acid anchor displayed the highest PCE of 8.79%, which is much higher than that of MH-12 alone (8.18%). Conclusively, the study furnishes a deeper understanding of the intricacies involved in the structural modification of sensitizers/co-sensitizers in achieving an enhanced performance of the devices. This journal is © 2020 the Owner Societies.Item Push-pull carbazole twin dyads as efficient sensitizers/co-sensitizers for DSSC application: effect of various anchoring groups on photovoltaic performance(Royal Society of Chemistry, 2025) Keremane, K.S.; Abdellah, I.M.; Eletmany, M.R.; Naik, P.; Anees, P.; Vasudeva Adhikari, A.V.To investigate the effect of various anchoring groups of organic sensitizers on fundamental processes occurring inside DSSCs and their overall performance, we designed and synthesized nine new double donor-acceptor (D-A) type organic dyes DCH1-9 comprising carbazole-based twin molecules as electron donors, with a non-conjugated linear alkyl chain as an extended linker featuring multiple acceptor units. Their photophysical, thermal, electrochemical, and theoretical properties were examined to gain a deeper understanding of the structure-property relationship. Photophysical results revealed that all dyes display ?abs and ?emi in the range of 400-470 nm and 500-560 nm, respectively, with a bandgap in the range of 2.46-2.74 eV. The push-pull structure with extended conjugation results in strong fluorescence characteristics. Photophysical and electrochemical studies confirm their thermodynamic feasibility for electron injection, recombination, and dye regeneration in cells. Quantum chemical simulations further provided insights into their structural, electronic, and optical parameters. New DSSCs were fabricated employing dyes DCH1-9 as sensitizers/co-sensitizers. The cell sensitized with DCH1 achieved the highest power conversion efficiency (PCE) of 2.45% under standard AM 1.5 solar conditions. Furthermore, co-sensitization of DCH1-9 with the Ru-based HD-2 sensitizer resulted in an improved PCE of 8.82% for DCH2, surpassing HD-2 alone (6.79%). EIS studies were conducted to further explore their energy conversion processes. Conclusively, these investigations highlight the significant potential of dyes carrying carbazole twin molecules with different anchoring units in enhancing the overall performance of DSSCs. © 2025 The Royal Society of Chemistry.Item New carbazole-based symmetric double D–A type chromophores for DSSC application: Impact of di-anchoring nature on photoelectrochemical processes(Elsevier B.V., 2025) Keremane, K.S.; Eletmany, M.R.; Abdellah, I.M.; Naik, P.; Vasudeva Adhikari, A.V.Herein, we report the systematic molecular design, synthesis, and characterization of a new series of carbazole-based organic dyes with a symmetric double donor–acceptor configuration, bearing seven different acceptor units as potential photosensitizers. The new molecules consist of strong electron-donating carbazole twin molecules linked together by a linear alkyl chain (C5H10) and attached to the various anchoring units, viz. cyanoacetic acid (DCP1), rhodanine-3-acetic acid (DCP2), rhodanine (DCP3), 1,3-dimethylbarbituric acid (DCP4), barbituric acid (DCP5), 1,3-diethyl-2-thiobarbituric acid (DCP6), and 4-nitrophenyl acetonitrile (DCP7). We performed structural, photophysical, thermal, electrochemical, and theoretical studies to assess the role of the dual anchoring nature of the chromophores on photoelectrochemical processes and their suitability as photosensitizers. The optical results revealed that all the dyes display ?abs and ?emi in the 404–465 nm and 503–556 nm range, respectively, with a bandgap of 2.44–2.70 eV. Furthermore, we have successfully fabricated new Dye-Sensitized Solar Cells (DSSCs) using dyes DCP1–7 as photosensitizers. Among them, DCP1 achieved the power conversion efficiency (PCE) of ?2 % under standard AM 1.5 solar conditions. Also, electrochemical impedance spectroscopy (EIS) has been carried out to investigate electronic and ionic processes within the cell. Conclusively, these studies showcase the significant potential of carbazole twin molecules with various anchoring units in improving the overall performance of DSSCs. © 2025 Elsevier B.V.Item Enhancing the Photoelectrochemical Performance of Ru(II)-Sensitized Dye-Sensitized Solar Cells Using Cyanopyridine-Based Cosensitizers(John Wiley and Sons Inc, 2025) Naik, P.; Abdellah, I.M.; Abdel-Shakour, M.; Keremane, K.S.; Vasudeva Adhikari, A.V.The cosensitization approach is one of the widely adopted strategies for systematically enhancing photovoltaic performance of dye-sensitized solar cells (DSSCs) by utilizing two or more dyes with distinct absorption spectra. This method achieves panchromatic absorption, improves intramolecular charge transfer performance, prevents dye aggregation, and increases dye loading capability. In this study, we investigated four previously reported push–pull-type dianchored chromophores (CP1–4) featuring a cyanopyridine scaffold as cosensitizer to enhance the performance of Ru(II)-based N3-sensitized DSSCs. Both the co-sensitized devices (N3 + CP1–4) and the N3-only devices were fabricated using a fixed dye concentration of 0.2 mM for each sensitizer/cosensitizers, while the coadsorbent chenodeoxycholic acid (CDCA) was systematically varied between 0 and 20 mM. This systematic variation of CDCA concentration was designed to examine its role in suppressing dye aggregation and modulating interfacial charge dynamics. Among the Series, CP4, carrying a thiobarbituric acid anchoring/acceptor group, demonstrated superior performance at all CDCA concentrations, achieving power conversion efficiency of 6.67%, 6.79%, and 5.74%, compared to 6.02%, 6.10%, and 5.44% for devices sensitized with N3 alone. Further, electrochemical impedance spectroscopy measurements confirmed the improved charge transport and reduced recombination in these devices. These findings highlight the potential of rationally engineered cosensitizers and optimized coadsorbent concentrations for enhancing the performance of metal-based sensitizers in DSSCs. © 2025 Wiley-VCH GmbH.