Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
9 results
Search Results
Item Preparation and antifouling properties of PVDF ultrafiltration membranes with polyaniline (PANI) nanofibers and hydrolysed PSMA (H-PSMA) as additives(Elsevier, 2014) Pereira, V.R.; Isloor, A.M.; Bhat, K.U.; A.F., A.F.Polyaniline (PANI) nanofibers were used as hydrophilic additives to study their effect on the performance of polyvinylidene fluoride (PVDF) ultrafiltration (UF) membranes. PVDF UF membranes were prepared by the phase inversion method with hydrolyzed polystyrene-co-maleic anhydride (H-PSMA) and PANI nanofibers as additives. PANI nanofibers were synthesized by rapid mixing reaction and were used as a hydrophilic modifying agent with varying concentrations (0-1.5 wt.%) in the membranes. The synthesized PANI nanofibers were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis. Hydrolyzed PSMA was prepared by the hydrolysis of PSMA and was used as a novel pore forming additive. The addition of PANI nanofibers into the membranes increased the membrane hydrophilicity, porosity, water uptake and permeability. The membranes also showed good antifouling nature during BSA (bovine serum albumin) filtration when compared to the pristine membrane without PANI nanofibers. Membrane with 1.0 wt.% PANI content showed highest permeability among the synthesized membranes. The membrane having highest permeability was subjected to heavy metal ion rejection which showed high rejection of 98.52% and 97.38% for heavy metal ions Pb2+ and Cd2+ respectively. © 2014 Elsevier B.V.Item Preparation and performance studies of polysulfone-sulfated nano-titania (S-TiO2) nanofiltration membranes for dye removal(Royal Society of Chemistry, 2015) Pereira, V.R.; Isloor, A.M.; Bhat, K.U.; A.F., A.F.; AlObaid, A.; Fun, H.-K.Polysulfone nanofiltration membranes containing sulfated nano-titania (S-TiO2) were fabricated, with the aim to enhance the membrane properties along with the possible rejection of Methylene Blue (MB) dye by membranes. Initially S-TiO2 was synthesized from nano TiO2 by the action of sulfuric acid. The synthesized S-TiO2 was characterized by Fourier Transform Infrared spectroscopy (FT-IR), Energy Dispersive Spectrophotometry (EDS) and Transmission Electron Microscopy (TEM) analysis. S-TiO2 was added in increasing concentrations into the membranes and its effect on the performance of the membranes was evaluated. The synthesized membranes were characterized by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). Polysulfone membranes containing S-TiO2 showed enhancement in properties in terms of hydrophilicity, water uptake, mechanical strength, improved pure water flux (PWF), antifouling nature and high Flux Recovery Ratio (FRR). The polysulfone membranes with S-TiO2 showed 99% rejection for BSA (Bovine Serum Albumin) protein molecules during BSA filtration. The prepared membranes were used for the removal of MB dye from aqueous solutions. A maximum of 90.4% rejection was obtained for MB for the membrane having 2.0 wt% of S-TiO2 under UV light radiation. This approach showed that polysulfone-S-TiO2 membranes displayed good efficiency for dye removal and can be effectively used for the removal of MB dye from aqueous solutions under suitable conditions. © The Royal Society of Chemistry.Item Novel hybrid photocatalytic reactor-UF nanocomposite membrane system for bilge water degradation and separation(Royal Society of Chemistry, 2015) Moslehyani, A.; A.F., A.F.; Othman, M.H.D.; Isloor, A.M.This study focuses on the design and performance of a hybrid system consisting of a photocatalytic reactor and ultrafiltration permeation cell. Initially, an ultraviolet (UV) lamp was installed in the photocatalytic reactor to decompose the bilge organic pollutants in the presence of 200 ppm titanium-dioxide (TiO2). Individual hydrocarbon compounds of bilge water samples were identified by gas chromatography-mass spectrometry (GC-MS) analysis. Two types of membrane, which are a pure polyvinylidene fluoride (PVDF) membrane and PVDF/modified halloysite nanotube clay (M-HNTs) nanocomposite membrane were fabricated aiming to enhance the rejection, flux and fouling resistance for full filtration of pollutants from the photocatalytic reactor. The membranes were characterized by Fourier transform infrared (FTIR), field emission scanning electron microscopy (FESEM) and atomic force microscopy (AFM). Furthermore, GC-MS analysis showed that, over 90% bilge decomposition occurred by a photocatalytic reaction. The TiO2 cross-over during permeation was detected by using an atomic absorption spectrophotometer (AAS), which proved that, TiO2 rejection was more than 99% for the nanocomposite membrane. A UV- vis spectrophotometer confirmed over 99% rejection of decomposed bilge hydrocarbons via the nanocomposite membrane with 1.0 wt% of M-HNTs incorporated in the PVDF matrix. This journal is © The Royal Society of Chemistry 2015.Item Preparation and characterization of novel PSf/PVP/PANI-nanofiber nanocomposite hollow fiber ultrafiltration membranes and their possible applications for hazardous dye rejection(Elsevier, 2015) Kajekar, A.J.; Dodamani, B.M.; Isloor, A.M.; Zulhairun, A.K.; Cheer, N.B.; A.F., A.F.; Shilton, S.J.In the present study, PANI (polyaniline)-nanofibers were synthesized by interfacial polymerization technique, dispersed in n-Methyl-2-Pyrrolidone (NMP) solvent and blended with PVP (Polyvinylpyrrolidone)/PSf (Polysulfone) for preparing the novel hollow fiber membrane by dry-wet spinning technique. The newly prepared nanocomposite ultrafiltration hollow fiber membrane is characterized by Scanning Electron Microscope (SEM), Contact Angle, Zeta Potential and Differential Scanning Calorimeter (DSC). Filtration studies are conducted to measure the membrane pure water flux (PWF), rejection of hazardous dye (Reactive Red 120) and fouling resistance. The maximum rejections are obtained for M 0.5 membrane with 99.25% rejection of RR120 hazardous dye at 2. bar pressure. The pure water flux, percentage rejection, antifouling property and thermal resistance increased with an increase in PANI-nanofiber concentration. The contact angle of the membrane decreased with increasing PANI-nanofiber concentration, which indicated increased hydrophilicity of the new membranes. © 2015 Elsevier B.V.Item Fabrication of polydopamine functionalized halloysite nanotube/polyetherimide membranes for heavy metal removal(Royal Society of Chemistry, 2016) Hebbar, R.S.; Isloor, A.M.; Kulal, K.; A.F., A.F.Polydopamine modified halloysite nanotubes (HNTs) were synthesised through a one step facile procedure and employed as a well dispersed hydrophilic additive to enhance the filtration properties of polyetherimide (PEI) membranes. The nanocomposite membranes were prepared by an immersion precipitation method with different amounts of modified HNTs (MHNTs) in the casting solution. The good dispersion of MHNTs throughout the membrane matrix was confirmed by elemental mapping analysis. The prepared nanocomposite membranes were extensively studied in terms of their porosity, morphology, membrane hydraulic resistance and hydrophilicity. The permeation experiments showed that the modified membranes exhibited higher water flux than a pristine PEI membrane. The antifouling and anti-biofouling behaviour of the modified membranes was investigated in detail. The results revealed that a membrane with a 3 wt% MHNT dosage showed a higher Fouling Resistance Ratio (FRR) of 74.5% with reversible membrane fouling of 64.3%. Moreover, the membrane showed excellent resistance to microbial growth on the membrane surface. The well performing membrane was subjected to heavy metal ion rejection. Results indicated that membranes had the capacity to adsorb Pb2+ and Cd2+. Overall, PEI-MHNTs nanocomposite membranes could have great potential to improve antifouling, anti-biofouling and filtration properties. © The Royal Society of Chemistry 2016.Item Fabrication of novel PPSU/ZSM-5 ultrafiltration hollow fiber membranes for separation of proteins and hazardous reactive dyes(Taiwan Institute of Chemical Engineers, 2018) Nayak, M.C.; Isloor, A.M.; Moslehyani, A.; Ismail, N.; A.F., A.F.Polyphenylsulfone (PPSU) based asymmetric hollow fiber membranes were prepared by the addition of different percentages of ZSM-5 particles by diffusion induced phase separation method. Polyvinylpyrrolidone (PVP) was used as a pore forming agent. The fabricated membranes were characterized by Field Emission scanning electron microscopy (FESEM), Energy Dispersive Spectroscopy (EDS), contact angle, water permeability, water uptake and by porosity measurements. Membranes filtration study was performed using different proteins namely bovine serum albumin (BSA), egg albumin (EA) and hazardous dyes like Reactive black 5 (RB-5), Reactive orange 16 (RO-16) in aqueous solutions. It was found that, addition of ZSM-5 in membrane matrix showed better dye removal capacity because of its hydrophilic and adsorptive nature. The membrane (PZ-3) with higher loading of additive exhibited rejection percentages of 100% for BSA, 95.23% for EA proteins and with reactive dyes 90.81% for RB-5 and 82.84% for RO-16 as compared to the pristine HF membrane. © 2017 Taiwan Institute of Chemical EngineersItem Antibiofouling hollow-fiber membranes for dye rejection by embedding chitosan and silver-loaded chitosan nanoparticles(Springer Verlag, 2019) Kolangare, I.M.; Isloor, A.M.; Zulhairun, Z.A.; Kulal, A.; A.F., A.F.; Siddique, I.; Asiri, A.M.The removal of toxic dyes from the wastewater and industrial effluents is a major environmental challenge. Various techniques have been employed for the removal of dyes, including the application of nano-sized adsorbents, nanocomposite membranes and photodegradation. Membrane filtration is an alterntive but suffers from drawbacks such as fouling. Here we present a simple approach for the development of antibiofouling membranes based on chitosan. The application of chitosan-based nanoparticles as additives for wastewater treatment is poorly explored. The chitosan and silver-loaded chitosan nanoparticles were synthesized by ionic gelation method and incorporated to fabricate hollow-fiber membranes by dry–wet spinning technique. The prepared membranes were characterized by morphological study, permeability test, antibiofouling study and dye rejection study. The nanocomposite hollow-fiber membranes displayed superior performance than their pristine form. The incorporation of 0.30 weight percent of the chitosan and silver-loaded chitosan nanoparticles into the hollow-fiber membranes enhanced the antifouling property with flux recovery ratio of 81.21 and 86.13%, respectively. The dye rejection results showed maximum rejection of 89.27 and 86.04% for Reactive Black 5 and Reactive Orange 16, respectively. Hence, it can be concluded that hollow-fiber membranes with silver-loaded chitosan nanoparticles are pertinent in developing antibiofouling membranes for the treatment of industrial dye effluents. © 2018, Springer Nature Switzerland AG.Item A chicken egg white-based amyloid–graphitic carbon nitride composite-incorporated hollow fiber membrane for efficient removal of dyes and heavy metal ions present in water(Royal Society of Chemistry, 2025) Nayak, S.S.; Isloor, A.M.; A.F., A.F.Severe water pollution due to excessive industrialization is resulting in a pure water crisis for humans and other living beings. This growing crisis emphasizes the urgent need for advanced and efficient water purification technologies to mitigate pollution and ensure the availability of pure water. To address this issue, the current study focuses on the synthesis of a chicken egg white amyloid–graphitic carbon nitride composite (AM–CN) using graphitic carbon nitride (g-C3N4) and egg whites through environment friendly and simple techniques. These composites were further characterized using different analytical techniques such as BET, FTIR, XRD, SEM, and TEM to understand the structure of the composite. Furthermore, these composites were embedded into hollow fiber membranes, and later, these membranes were analyzed through AFM, SEM, and hydrophilicity studies to understand the character and structure of the membrane. The filtration performance of the membrane revealed that the membrane with the AM–CN composite demonstrated enhanced performance in both pure water permeability and pollutant removal capacity. Among the fabricated membranes, the neat membrane exhibited a pure water permeability of 81 L m?2 h?1 bar?1. In contrast, the highest permeability of 203 L m?2 h?1 bar?1 was exhibited by the M II membrane, therefore considering it as an optimized membrane. This optimized membrane also displayed the highest pollutant removal capacity of >99% for Congo red dye, >98% for Reactive black 5 and 88% for Reactive orange 16 dye. In the case of heavy metal ion removal, the same membrane displayed an impressive 99% removal of lead ions and 75% removal of mercury ions in the presence of humic acid. © 2025 The Royal Society of Chemistry.Item Effective separation of agrochemicals and textile dyes from polluted aqueous solution employing ternary ZnCoFe layered double hydroxide incorporated polyethersulfone hollow fiber ultrafiltration membrane(Elsevier B.V., 2025) Pallot, H.; Isloor, A.M.; A.F., A.F.The rapid urbanization and industrialization has increased the contamination of water bodies with agrochemical residues and textile dyes, which poses a severe threat to environmental and human health, necessitating the need of an efficient water purification strategies. Membrane-based filtration techniques has grown significantly due to the demand for sustainable and effective water treatment. For the first time, ternary ZnCoFe layered double hydroxides (LDH) modified polyethersulfone hollow fiber ultrafiltration membrane was developed for enhancing hydrophilicity and separation efficiency of dyes and agrochemicals. The widespread use and long-term persistence in the water bodies of Reactive Orange 16, Crystal Violet, chlorpyrifos and 2,4-dichlorophenoxy acetic acid (2,4-D) highlight the critical need for the effective removal of these pollutants. ZnCoFe LDH was developed by the co-precipitation method with a 2:2:1 M ratio of nitrates of Zn, Co, and Fe transition metals. The membranes were fabricated with different composition of LDH. The influence of LDH in the membranes was assessed through FESEM, AFM, zeta potential, contact angle, water uptake capacity, porosity, water permeability, and molecular weight cut-off. The incorporation of ZnCoFe-LDH into the PES membrane resulted in an improved pure water flux, rising from 91.03 Lm?2 h?1 for the pristine (MLZ-0) membrane to 143.25 Lm?2 h?1 for the optimized (MLZ-2). The optimized membrane exhibits a good antifouling property with flux recovery ratio improved from 52.13 to 64.18%. The rejection of Reactive Orange 16 and Crystal Violet was found to be 74.9% and 79.8% for MLZ-0 whereas for MLZ-2 the values were 83.2% and 99.1% respectively. MLZ-2 also exhibited 47.1% and 90.9% for 2,4-D and chlorpyrifos rejection respectively while pristine membrane showed 22.7% and 78.8%. © 2025 Elsevier B.V.