Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
4 results
Search Results
Item Carbon-based nanocomposite membranes for water and wastewater purification(Elsevier, 2018) Gnani Peer Mohamed, G.P.S.; Isloor, A.M.; Yuliwati, E.; A.F., A.F.The carbon-based nanocomposite membranes are developing core technology for water and wastewater purification. These materials are broadly used in the fabrication of ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO) and evolving forward osmosis (FO) nanocomposite membranes as an additive. In this chapter, performance enhancement of nanocomposite membranes using carbon nanotubes (CNTs) and graphene oxide (GO), especially in the field of desalination, dye removal, oil/water separation and natural organic matter removal, is discussed. © 2019 Elsevier Inc. All rights reserved..Item Antibiofouling hollow-fiber membranes for dye rejection by embedding chitosan and silver-loaded chitosan nanoparticles(Springer Verlag, 2019) Kolangare, I.M.; Isloor, A.M.; Zulhairun, Z.A.; Kulal, A.; A.F., A.F.; Siddique, I.; Asiri, A.M.The removal of toxic dyes from the wastewater and industrial effluents is a major environmental challenge. Various techniques have been employed for the removal of dyes, including the application of nano-sized adsorbents, nanocomposite membranes and photodegradation. Membrane filtration is an alterntive but suffers from drawbacks such as fouling. Here we present a simple approach for the development of antibiofouling membranes based on chitosan. The application of chitosan-based nanoparticles as additives for wastewater treatment is poorly explored. The chitosan and silver-loaded chitosan nanoparticles were synthesized by ionic gelation method and incorporated to fabricate hollow-fiber membranes by dry–wet spinning technique. The prepared membranes were characterized by morphological study, permeability test, antibiofouling study and dye rejection study. The nanocomposite hollow-fiber membranes displayed superior performance than their pristine form. The incorporation of 0.30 weight percent of the chitosan and silver-loaded chitosan nanoparticles into the hollow-fiber membranes enhanced the antifouling property with flux recovery ratio of 81.21 and 86.13%, respectively. The dye rejection results showed maximum rejection of 89.27 and 86.04% for Reactive Black 5 and Reactive Orange 16, respectively. Hence, it can be concluded that hollow-fiber membranes with silver-loaded chitosan nanoparticles are pertinent in developing antibiofouling membranes for the treatment of industrial dye effluents. © 2018, Springer Nature Switzerland AG.Item Efficient removal of hazardous dyes/heavy-metal ions by in-house fabricated poly (vinylidene fluoride) thin-film nanocomposite membranes with functionalized Zr-based metal-organic framework(Elsevier Ltd, 2025) Prabhakar, N.; Isloor, A.M.; Farnood, R.; A.F., A.F.The need for effective solutions to address removal of dyes and heavy metal ions from water has driven significant interest in membrane science and separation technology. This work explores the potential of EDTA-modified MOF-808 as a novel additive to enhance the performance of PVDF supported TFC membranes. The innovation lies in aiming the unique properties of MOF and the chelating properties of EDTA in rejecting the target pollutants. The thin film nanocomposite membranes fabricated in this study with optimized MOF-EDTA loading demonstrated remarkable improvement in hydrophilicity, surface smoothness, porosity, and morphology as confirmed by water contact angle, atomic force microcopy, water uptake, and scanning electron microscopy. The optimized membrane with 0.1wt% MOF-808-EDTA exhibited a water flux of 37.36 Lm-2h-1, a 2.7-fold increment compared to the unmodified one. This was complemented by 98.6%, 91.48%, 88.7%, and 88.96% rejections in hazardous heavy metal ions namely lead, arsenite, cadmium and mercury respectively along with more than 95% rejections for 50ppm of sunset yellow and reactive black 5 dyes. The study also highlights the significant enhancement in antifouling properties with a reduction in irreversible fouling from 41.5% to 5.68% along with a flux rejection ratio of 94.3%. These findings underscore the potential of EDTA-modified MOF as an additive in enhancing the performance and durability of TFC membranes paving the way for efficient and sustainable water treatment. The current study explores an innovative approach for mitigating heavy metal ion and dye pollution in water via fabrication of. © 2025 Published by Elsevier Ltd.Item Sustainable waste water purification via integration of novel COF@UiO-66 dual-layer PVDF/PEI hollow fiber membranes(Elsevier B.V., 2025) Prabhakar, N.; Isloor, A.M.; Othman, M.H.D.; A.F., A.F.In the present study, dual-layer (polyvinylidene fluoride (PVDF)/ polyether imide (PEI) blend membranes were fabricated by coextrusion technique, with varying loadings (0–1.5 wt%) of covalent organic framework (COF) grafted UiO-66, for dye and heavy metal ion removal. UiO-66-NH2 was chosen for its excellent surface area and water stability, which can enhance the water permeability through the membrane without getting degraded over a period of time. The structures of the synthesized UiO-66-NH2 and COF@UiO-66 were confirmed by characterizations like scanning electron microscopy (SEM), FTIR (Fourier Transform Infrared Spectroscopy), and XRD (X-ray Diffraction). The membrane fabricated with the synthesized additive in the outer layer, was characterized by atomic force microscopy (AFM) and scanning electron microscopy (SEM) for the surface topography and morphology. The incorporation of the additive significantly affected the hydrophilicity, porosity, and surface area of the membrane, resulting in improved permeability and rejection, along with imparting relatively good antifouling nature to the membrane. Membrane with outer dope flow rate of 2 mL/min and an optimized loading of the additive (1.0 wt.%) displayed a water permeability of 117.5 Lm?2 h?1 bar?1, whereas the neat membrane showed only 60 Lm?2 h?1 bar?1. The dyes, Congo red and reactive black-5, showed rejections of 99.1 %, and 97.96 % respectively. Whereas, the heavy metal ions mercury and lead showed 69.58 %, and > 99.9 % in the complexed state with humic acid for the optimized membrane, along with a bovine serum albumin (BSA) fouling rejection ratio of 74.22 %. Whereas the neat membrane without the MOF additive showed 89 %, 79 %, 75 %, and 43 % rejections for reactive black 5, congo red, lead, and mercury ions, respectively, with an FRR of only 57 %. © 2025 Elsevier B.V.