Faculty Publications
Permanent URI for this communityhttps://idr.nitk.ac.in/handle/123456789/18736
Publications by NITK Faculty
Browse
Search Results
Item Novel mixed matrix membranes incorporated with dual-nanofillers for enhanced oil-water separation(Elsevier B.V., 2017) Lai, G.S.; Yusob, M.H.M.; Lau, W.J.; Jamshidi Gohari, R.J.; Emadzadeh, D.; A.F., A.F.; Goh, P.S.; Isloor, A.M.; Arzhandi, M.R.-D.In this work, a new type of mixed matrix membranes (MMMs) composed of dual-nanofillers at different ratios of hydrous manganese oxide (HMO) and titanium dioxide (TiO2) was fabricated with the objective of improving properties of polyethersulfone (PSF)-based membrane for oil-water separation process. The morphology and surface chemistry of the resultant MMMs were characterized by several analytical instruments, i.e., SEM-EDX, contact angle goniometer and FTIR spectrometer prior to separation performance evaluation using oily solution composed of 500 or 2000 ppm. The results showed that the membrane surface hydrophilicity was greatly improved upon addition of hydrophilic nanofillers and HMO in particular showed greater extent of hydrophilicity enhancement owing to the fact that it is associated with higher amount of [sbnd]OH functional groups compared to TiO2. The improved surface hydrophilicity coupled with formation of long finger-like voids in the membrane structure are the main factors leading to greater water flux of MMMs in comparison to control PES membrane. MMM2 (membrane made of HMO:TiO2ratio of 0.75:0.25) and MMM4 (HMO:TiO2ratio of 0.25:0.75) in particular were the best two performing nanofillers-incorporated membranes owing to their good balance between water flux and oil removal rate. They achieved 31.73% and 26.41% higher water flux than that of the control membrane without sacrificing oil removal rate. Most importantly, these nanofillers-incorporated membranes showed significantly lower degree of flux decline as a result of improved surface resistance against oil fouling and are of potential for long-term operation with extended lifespan. © 2017 Elsevier B.V.Item Efficient treatment of hazardous reactive dye effluents through antifouling polyetherimide hollow fiber membrane embedded with functionalized halloysite nanotubes(Taiwan Institute of Chemical Engineers, 2017) Hebbar, R.S.; Isloor, A.M.; Zulhairun, A.K.; Sohaimi Abdullah, M.; A.F., A.F.A simple, efficient and scalable approach was developed for the fabrication of highly fouling resistance nanocomposite hollow fiber membranes with the aim of effective removal of environmentally detrimental reactive dyes. The naturally occurring halloysite nanotubes were functionalized via facile self-polymerization of m-aminophenol in mild acidic condition and employed as a hydrophilic additive. The chemical modification was confirmed by FTIR, TEM and energy dispersed X-ray (EDX) analysis. The hybrid nanocomposite membrane was prepared by dry–wet spin technique with different additive dosage. The resultant membrane was characterized in terms of contact angle, surface energy, porosity, zeta potential, elemental mapping and morphology. The permeation experiments illustrated superior water flux of 104.9 Lm?1 h?1 and 9.6% of irreversible fouling with more than 90.3% of flux recovery by the simple hydraulic cleaning. Most importantly, prepared membrane was subjected for hazardous reactive dye removal application with different experimental parameters. The hybrid membrane with 2 wt. % of additive concentration showed more than 97% and 94% for the Reactive Red 102 and Reactive Black 5 dyes respectively. This approach may also be very useful in developing high flux, fouling resistant ultrafiltration hollow fiber membranes for the other similar type applications such as hemodialysis membranes. © 2017 Taiwan Institute of Chemical Engineers