Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
37 results
Search Results
Item A Computer Aided Cooling Curve Analysis method to study phase change materials for thermal energy storage applications(Elsevier Ltd, 2016) Sudheer, R.; Prabhu, K.N.The suitability of a simple Computer Aided Cooling Curve Analysis (CACCA) technique for characterizing thermal energy storage phase change materials (PCM) was proposed in the present work. Two modes of CACCA, namely, Newtonian and Fourier techniques were used to predict the phase transition temperatures, the latent heat of fusion and thermal diffusivities of PCMs. Solidification of potassium nitrate and zinc-8% aluminium alloy (ZA8) was studied using CACCA method. These PCMs were chosen to demonstrate the ability of the proposed technique to characterize PCMs freezing at a single temperature as well as over a range of temperatures. CACCA method showed that potassium nitrate and ZA8 are suitable candidate materials for TES applications operating at 300-350 °C and 350-450 °C respectively. © 2015 Elsevier Ltd.Item Memory type switching behavior of ternary Ge20Te80-xSnx (0 x 4) chalcogenide compounds(Institute of Physics Publishing michael.roberts@iop.org, 2016) Fernandes, B.J.; Sridharan, K.; Pumlianmunga, P.; Ramesh, K.; Udayashankar, N.K.Chalcogenide compounds have gained huge research interest recently owing to their capability to transform from an amorphous to a crystalline phase with varying electrical properties. Such materials can be applied in building a new class of memories, such as phase-change memory and programmable metallization cells. Here we report the memory type electrical switching behavior of a ternary chalcogenide compound synthesized by doping Tin (Sn) in a germanium-telluride (Ge20Te80) host matrix, which yielded a composition of Ge20Te80-xSnx (0 x 4). Results indicate a remarkable decrease in the threshold switching voltage (V T) from 140 to 61 V when the Sn concentration was increased stepwise, which is attributed to the domination of the metallicity factor leading to reduced amorphous network connectivity and rigidity. Variation in the threshold switching voltage (V T) was noticed even when the sample thickness and temperature were altered, confirming that the memory switching process is of thermal origin. Investigations using x-ray diffraction (XRD) and scanning electron microscopy (SEM) revealed the formation of a crystalline channel that acts as the conduction path between the two electrodes in the switched region. Structural and morphological studies indicated that Sn metal remained as a micro inclusion in the matrix and hardly contributed to the rigid amorphous network formation in Ge20Te80-xSnx. Memory type electrical switching observed in these ternary chalcogenide compounds synthesized herein can be explored further for the fabrication of phase-change memory devices. © 2016 IOP Publishing Ltd.Item Crystallization kinetics of Sn doped Ge20Te80?xSnx (0 ? x ? 4) chalcogenide glassy alloys(Elsevier Ltd, 2017) Fernandes, B.J.; Naresh, N.; Ramesh, K.; Sridharan, K.; Udayashankar, N.K.Chalcogenide semiconductors have evolved as multifunctional materials due to their fascinating thermal, optical, electrical and mechanical properties. In this report, Ge20Te80?xSnx (0 ? x ? 4) glassy alloys are systematically studied in order to understand the effect of variation of Sn content on the thermal parameters such as glass transition (Tg) onset crystallization (Tc), peak crystallization (Tp), melting temperature (Tm), activation energy of glass transition (Eg), and crystallization (Ec). The values of Eg are calculated from the variation of Tg with the heating rate (?), according to Kissinger and Moynihan model, while the values of Ec are calculated from the variation of Tp with the heating rate (?), according to Kissinger, Takhor, Augis-Bennett and Ozawa model. Thermal stability and glass forming ability (GFA) are discussed for understanding the applicability of the synthesized materials in phase change memory (PCM) applications. Thermal parameters are correlated with the electrical switching studies to get an insight into the phase change mechanism. The results of the calculated thermal parameters reveal that the GFA of the synthesized Ge20Te80?xSnx (0 ? x ? 4) glassy alloys has a synchronous relationship with their thermal properties studied through differential scanning calorimetry, indicating their potential for phase-change memory device applications. © 2017 Elsevier B.V.Item Cooling Curve Analysis of Micro- and Nanographite Particle-Embedded Salt-PCMs for Thermal Energy Storage Applications(Springer New York LLC barbara.b.bertram@gsk.com, 2017) Sudheer, R.; Prabhu, K.N.In recent years, the focus of phase change materials (PCM) research was on the development of salt mixtures with particle additives to improve their thermal energy storage (TES) functionalities. The effect of addition of microsized (50 ?m) and nanosized (400 nm) graphite particles on TES parameters of potassium nitrate was analyzed in this work. A novel technique of computer-aided cooling curve analysis was employed here to study the suitability of large inhomogeneous PCM samples. The addition of graphite micro- and nanoparticles reduced the solidification time of the PCM significantly enhancing the heat removal rates, in the first thermal cycle. The benefits of dispersing nanoparticles diminished in successive 10 thermal cycles, and its performance was comparable to the microparticle-embedded PCM thereafter. The decay of TES functionalities on thermal cycling is attributed to the agglomeration of nanoparticles which was observed in SEM images. The thermal diffusivity property of the PCM decreased with addition of graphite particles. With no considerable change in the cooling rates and a simultaneous decrease in thermal diffusivity, it is concluded that the addition of graphite particles increased the specific heat capacity of the PCM. It is also suggested that the additive concentration should not be greater than 0.1% by weight of the PCM sample. © 2017, ASM International.Item Assessment of PCM-container interfacial heat transfer using a hot/cold probe technique(John Wiley and Sons Inc. P.O.Box 18667 Newark NJ 07191-8667, 2019) Sudheer, R.; Prabhu, K.N.A novel technique for assessing heat transfer characteristics of salt-based phase change materials (PCM) was proposed here. The method is based on solution to inverse heat conduction problem. Nanoparticles (Graphite, Graphene, and multi wall carbon nanotube [MWCNT]) were dispersed in the PCM (KNO3) to assess their respective influence on heat transfer in the PCM. Graphite added PCM offered highest heat flow values and heating rates, while the pure salt-PCM offered the least. The probe material had a significant influence on the heat transfer rates at the PCM-probe interface. © 2018 Wiley Periodicals, Inc.Item Characterization of linear low-density polyethylene with graphene as thermal energy storage material(Institute of Physics Publishing helen.craven@iop.org, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.In this work authors reported the preparation and characterization of composite phase change material (CPCM) using the direct-synthesis method by blending the Linear low-density polyethylene (LLDPE) with Carboxyl Functionalized Graphene (f-Gr). LLDPE is selected as base material and f-Gr is dispersed into three different concentrations 1.0, 3.0, and 5.0 wt% and referred as CPCM-1, CPCM-2 and CPCM-3 respectively. Experimental analysis is carried out through Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and Differential scanning calorimeter (DSC). The preset study assesses the influences of nanoparticle concentration on thermophysical properties, thermal performance and thermal storage characteristics of CPCMs. Results show that addition of f-Gr improves the thermal conductivity and latent heat of fusion of LLDPE. However, f-Gr slightly reduces the melting temperature and decreased the crystallization temperature. Therefore, this study reveals that f-Gr, addition to LLDPE has substantial potential for improving the thermal energy storage performance. © 2019 IOP Publishing Ltd.Item Computational investigation of bounded domain with different orientations using CPCM(Elsevier Ltd, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.The present work deals with the composite phase change material (CPCM) of 98% paraffin wax and 2% copper nanoparticle, filled into the bounded domain. Effects of orientation (45° 90° 135° and 180°) with different wall heating conditions (base, left and top wall) are analyzed numerically to understand the flow patterns and interface morphology developed during melting/solidification processes. The melting/solidification mechanism exhibited non-uniform flow patterns and irregular morphology which are dependent on geometrical orientations and different wall heating conditions. The results revealed that the bounded domain with different orientations have significant effect on natural convection current formation. As the orientation changes, the heat transfer rate gets influenced significantly and convection currents amplifies. Top wall heating arrangement of 180° orientation shows competence in achieving better thermal performance. © 2019 Elsevier LtdItem Characterization of metals and salts-based thermal energy storage materials using energy balance method(John Wiley and Sons Inc. P.O.Box 18667 Newark NJ 07191-8667, 2019) Agarwala, S.; Prabhu, N.K.Thermal energy storage technologies minimize the imbalance between energy production and demand. In this context, latent heat storage materials are of great importance as they have a higher density of energy storage as compared with the sensible heat storage materials. The present study involves the characterization of energy storage materials using an energy balance cooling curve analysis method. The method estimates the convective heat transfer coefficient in the solidification range to characterize the phase change materials for applications in energy storage. The method is more beneficial than the Computer Aided Cooling Curve analysis methods as it eliminates baseline calculations and the associated fitting errors. Metals (Sn) and salts (KNO3 and NaNO 3) were used in the present work. Phase change characteristics like the rate of cooling, liquidus and solidus temperatures, time for solidification, and enthalpy of phase change were estimated for both metals and salts. It was observed that the energy balance cooling curve analysis method worked very well for metals but not well suited for low conductivity salts. Salts could not be characterized since the thermal gradient existing within the salt sample was not considered in this method. © 2019 Wiley Periodicals, Inc.Item Thermal property study of fatty acid mixture as bio-phase change material for solar thermal energy storage usage in domestic hot water application(Elsevier Ltd, 2019) B.V., R.M.; Gumtapure, V.For the correct design, simulation and specific application of the latent heat thermal energy storage (LHTES) system, detailed evaluation of phase change material (PCM) properties are essential. Present study aims to analyze the thermal and volume dependent behavior of available organic Bio-PCM OM55, using conventional thermal gravimetric analyzer (TGA), thermal constant analyzer (TCA), differential scanning calorimeter (DSC) and in-house T-history method (THM). Execution of the mentioned thermal analysis outcome with significant information of OM55. TGA shows that OM55 is thermally stable within the operating temperature 45–60 °C, because the maximum permissible degradation temperature 154.6 °C is much higher than operating temperature range. The OM55 has considerable thermal conductivity compared to the existing PCM, which is already used in domestic solar water heating (DSWH) applications. The evaluation of transition temperature, isothermal enthalpy, and specific heat by THM are well compared with the DSC analysis. Comparison of DSC and THM analysis showed that the behavior of OM55 is volume independent. The overall study concluded that OM55 is a potential Bio-PCM. However, for the optimum amount of energy storage and discharge in OM55, it is recommended to operate the LHTES unit over a temperature range between 46–59 °C for domestic hot water application. © 2019 Elsevier LtdItem Numerical and experimental analysis on thermal energy storage of polyethylene/functionalized graphene composite phase change materials(Elsevier Ltd, 2020) Chavan, S.; Gumtapure, V.; Arumuga Perumal, A.P.The main driving force behind the present work is environmental issues caused due to the usage of plastics, and energy issues. Current work attempts to address these problems by converting recycled plastics into thermal storage materials (TSM). Unfavorable thermophysical properties of plastic make it impractical but these inadequacies can be amended by blending with additives of superior thermophysical properties like, functionalized graphene. Numerical and experimental analysis are carried out to assess the thermal performance of TSMs (LLDPE, CPCM-1, CPCM-2 and CPCM-3) and check the compatibility of the materials. The phase change temperature of TSM is 123 to 125 °C and heat of fusion is 71.95 to 97 kJ/kg. Several thermal characteristics are analyzed to assess thermal performance and the amount of heat energy supplied, rate of heat transfer, and heat storage efficiency are deliberated. Results shown energy level enhancement of 43.17, 50.42, 54 and 50.61% for LLDPE, CPCM-1, CPCM-2 and CPCM-3 respectively. Among the TSM CPCM-2 shows relatively better storage capability (54% enhancement) due to incorporation of optimum concentration of enhancing material. The solidification process takes place through convection and radiation mode of heat transfer, at the completion of solidification process the TSM energy content reduces to 97.5, 96, 96 and 96% for LLDPE, CPCM-1,CPCM-2 and CPCM-3 respectively. This work concludes that, recycled plastics can be blended and it can be converted into efficient thermal storage material. © 2019 Elsevier Ltd