Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
100 results
Search Results
Item Item Capacitance computation is an important step in the development of a spacecraft equivalent circuit model for predicting the surface charge build up. Since different parts of the spacecraft may be represented in terms of standard geometrical shapes, this paper presents a numerical procedure developed for computing the capacitance of such standard objects located in free space. The objects considered are conducting and hence the analysis assumes an equipotential surface having an unknown charge distribution. The charge distribution and the total charge are evaluated using the moment method by triangular patch modelling of the surface. The capacitance in free space of planar, cubic and wedge shaped conducting geometries have been numerically computed using the above technique. The results obtained for some of these geometries have been compared with the results available in the literature.(Free space capacitance of conducting surfaces) Hariharan, V.K.; Shastry, S.V.K.; Chakraborty, A.; Katti, V.R.1998Item Activated carbon-polyethylenedioxythiophene composite electrodes for symmetrical supercapacitors(2008) Muthu, M.S.; Bhat, D.K.A symmetrical (p/p) supercapacitor has been fabricated by making use of activated carbon (AC)-poly-ethylenedioxythiophene (PEDPT)-composite electrodes for the first time. The composite electrodes have been prepared via electrochemical deposition of ?-napthalenesulphonate doped PEDPT onto AC electrodes. The characteristics of the electrodes and the fabricated supercapacitor have been investigated using cyclic voltammetry (CV) and AC impedance spectroscopy. The electrodes show a maximum specific capacitance of 158 Fg-1 at a scan rate of 10 mV s_1. This indicates that the in situ electro-polymerization of ethylenedioxythiophene (EDPT) onto AC could improve the performance of carbon electrodes for use in supercapacitors. © 2007 Wiley Periodicals, Inc.Item Polyvinyl alcohol-polystyrene sulphonic acid blend electrolyte for supercapacitor application(2009) Muthu, M.S.; Bhat, D.K.A new polymer blend electrolyte based on poly vinyl alcohol and poly styrene sulphonic acid has been studied as an electrolyte for supercapcitors. A carbon-carbon supercapacitor has been fabricated using this electrolyte and its electrochemical characteristics and performance have been studied. The conductivity has been calculated using the bulk impedance obtained through impedance spectroscopy. The real and imaginary parts of the electrical modulus of samples show a long tail feature, which can be attributed to high capacitance of the material. The super capacitor showed a fairly good specific capacitance of 40 F g- 1 and a time constant of 5 s. © 2008 Elsevier B.V. All rights reserved.Item LiClO4-doped plasticized chitosan as biodegradable polymer gel electrolyte for supercapacitors(2009) Muthu, M.S.; Bhat, D.K.Studies on redox supercapacitors using electronically conducting polymers are of great importance for hybrid power sources and pulse power applications. In this study, electrochemical properties of a chitosan-based biodegradable polymer gel electrolyte (PGE) and a p/p polypyrrole supercapacitor fabricated using this electrolyte have been investigated. The variation of conductivity and dielectric properties of the electrolyte film with temperature has also been measured. The PGE film chosen for the study exhibited a specific conductivity of 5.5 × 10-3 S cm~. The electric modulus of the electrolyte film exhibits a long tail feature indicative of good capacitance. The fabricated supercapacitor showed a fairly good specific capacitance of 120 F g-1 and a time constant of 1 s. © 2009 Wiley Periodicals, Inc.Item Nano ZnO-activated carbon composite electrodes for supercapacitors(2010) Muthu, M.S.; Bhat, D.K.; Aggarwal, A.; Prahladh Iyer, S.; Sravani, G.A symmetrical (p/p) supercapacitor has been fabricated by making use of nanostructured zinc oxide (ZnO)-activated carbon (AC) composite electrodes for the first time. The composites have been characterized by field emission scanning electron microscopy (FESEM) and X-ray diffraction analysis (XRD). Electrochemical properties of the prepared nanocomposite electrodes and the supercapacitor have been studied using cyclic voltammetry (CV) and AC impedance spectroscopy in 0.1 M Na2SO4 as electrolyte. The ZnO-AC nanocomposite electrode showed a specific capacitance of 160 F/g for 1:1 composition. The specific capacitance of the electrodes decreased with increase in zinc oxide content. Galvanostatic charge-discharge measurements have been done at various current densities, namely 2, 4, 6 and 7 mA/cm2. It has been found that the cells have excellent electrochemical reversibility and capacitive characteristics in 0.1 M Na2SO4 electrolyte. It has also been observed that the specific capacitance is constant up to 500 cycles at all current densities. © 2010 Elsevier B.V. All rights reserved.Item Comparison of Grossmann and lumped heat capacitance methods for assessment of heat transfer characteristics of quench media(2011) Prabhu, K.N.; Ali, I.The suitability of Grossmann and lumped heat capacitance (LHC) methods for estimation of quench severity of nanofluids, brine solutions and a laboratory detergent based medium was investigated. The study involved the assessment of the effect of section thickness of the probe on heat transfer coefficients for different quench media. Computer aided cooling curve analysis during quenching of type 304 stainless steel probes was carried out. The measured thermal history data were used to estimate heat transfer coefficients by Grossmann and LHC methods. The LHC method based on a 10 mm diameter stainless steel probe was found to be applicable for characterising media having quench severity less than 20 m-1. Although Grossmann method is based on the concept of average heat transfer coefficient, it can be used for quench media having varying severity of quenching. Grossmann method is found to be more sensitive to the effect of section thickness on heat transfer. © 2011 IHTSE Partnership.Item Effect of surfactant on high capacitance of galvanostatically deposited MnO2(Elsevier B.V., 2012) Suhasini; Hegde, A.Manganese dioxide has been galvanostatically deposited on stainless-steel substrate from an aqueous acidic solution of manganese sulphate (1 M) in presence of a surface active agent (surfactant), namely, sodium lauryl sulphate (SLS), for supercapacitor applications. The deposits have been developed under different conditions of SLS and their specific capacitance is measured by cyclic voltammetry (CV) and also by galvanostatic charge/discharge cycle. The oxide film (?0.1 mg cm-2) anodized from the manganese solution at 2.0 mA cm-2 has shown the highest specific capacitance of 255.8 F g -1, at scan rate of 10 mV s-1. It is observed that the capacitance increased by about 40% compared to the oxide prepared in the absence of SLS. Improved specific capacitance is due to the effect of the surfactant molecules in the deposit, causing high surface area of the deposit. The deposit is found to display good cycleability, even up to 1500 cycles. The structure and surface morphology of the deposits have been studied by means of X-ray diffraction (XRD) analysis and Scanning Electron Microscopy (SEM). XRD study reveals that crystallinity of the deposit with SLS remains unchanged, both are amorphous in nature. The surface area of the deposit is found to increase considerably due to the effect of SLS, as evident by SEM study.© 2012 Elsevier B.V. All rights reserved.Item Microwave synthesized nanostructured TiO 2 -activated carbon composite electrodes for supercapacitor(Elsevier B.V., 2012) Muthu, M.; Bhat, D.K.Electrochemical properties of a supercapacitor based on nanocomposite electrodes of activated carbon with TiO 2 nano particles synthesized by a microwave method have been determined. The TiO 2 /activated carbon nanocomposite electrode with a composition of 1:3 showed a specific capacitance 92 Fg -1 . The specific capacitance of the electrode decreased with increase in titanium dioxide content. The p/p symmetrical supercapacitor fabricated with TiO 2 /activated carbon composite electrodes showed a specific capacitance of 122 Fg -1 . The electrochemical behavior of the neat TiO 2 nanoparticles has also been studied for comparison purpose. The galvanostatic charge-discharge test of the fabricated supercapacitor showed that the device has good coulombic efficiency and cycle life. The specific capacitance of the supercapacitor was stable up to 5000 cycles at current densities of 2, 4, 6 and 7 mA cm -2 . © 2012 Elsevier B.V.Item LiClO4-doped plasticized chitosan and poly(ethylene glycol) blend as biodegradable polymer electrolyte for supercapacitors(Institute for Ionics, 2013) Sudhakar, Y.N.; Muthu, M.; Bhat, D.K.Biodegradable polymer electrolyte comprising the blend of chitosan (CS) and poly(ethylene glycol) (PEG) plasticized with ethylene carbonate and propylene carbonate, as host polymer, and lithium perchlorate (LiClO4), as a dopant, was prepared by solution casting technique. The ionic conductivity has been calculated using the bulk impedance obtained through impedance spectroscopy. The variation of conductivity and dielectric properties has been investigated as a function of polymer blend ratio, plasticizer content and LiClO4 concentration at temperature range of 298-343 K. The DSC thermograms show two broad peaks for CS/PEG blend and increased with increase in the LiClO4 content. The maximum conductivity has been found to be 1. 1 × 10-4 S cm-1 at room temperature for 70:30 (CS/PEG) concentration. The electric modulus of the electrolyte film exhibits a long tail feature indicative of good capacitance. The activation energy of all samples was calculated using the Arrhenius plot, and it has been found to be 0. 12 to 0. 38 eV. A carbon-carbon supercapacitor has been fabricated using this electrolyte, and its electrochemical characteristics and performance have been studied. The supercapacitor showed a fairly good specific capacitance of 47 F g-1. © 2012 Springer-Verlag.