Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
127 results
Search Results
Item A review on thermal energy storage using composite phase change materials(Bentham Science Publishers, 2018) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.Background: This paper intends to provide the elementary understanding about the development of thermal energy storage systems. Reviews of storage system performance are carried out from various characterization studies, experimental work, numerical investigations and patents. Several techniques employed to enhance the thermal performance have been reviewed and discussed. Composite phase change materials are the best alternative to achieve the cost feasibility in thermal energy storage systems without compromising the storage capacity. Objective: The purpose of this study is to give an outline and history of the thermal energy storage systems and enlighten the techniques used for storage density enhancement without significant modifications in the design. Methods: In this study, three methods such as, characterization studies, experimental work, numerical investigations and patents. It also addresses many research articles and recent patents on the thermal storage systems, various techniques adopted and applications of such systems. Results: Composite phase change materials are the best alternative to achieve the cost feasibility in thermal energy storage systems without compromising the storage capacity. Carbon based nanoparticles show excellent properties in the composite phase change materials. Conclusion: Composite phase change materials have greater potential for thermal energy storage applications and especially carbon-based nanoparticles like graphene, graphene oxide, carbon nanotubes, fullerene, graphite, graphite oxide, extracted graphite etc., are greatly enhancing the thermo-physical properties of composite phase change materials. Combination of paraffin-based phase change materials and carbon-based nanoparticles can be used for the future thermal energy storage applications. © 2018 Bentham Science Publishers.Item Carbon nanotube- and graphene-based advanced membrane materials for desalination(Springer Verlag, 2017) Hebbar, R.S.; Isloor, A.M.; Siddique, I.; Asiri, A.M.The development of membrane-based desalination and water purification technologies offers new alternatives to meet the global freshwater demand. Rapid advancement in carbon nanotube-based and graphene-based nanomaterials has drawn the attention of scientific investigators on various desalination technologies. These nanomaterials indeed offer advantageous structure, size, shape, porosity and mass transport behavior for membrane separation process. This article reviews theoretical and experimental investigations of carbon nanotube- and graphene-based composite materials for desalination. Special attention is given to the simulation of molecular transport through these materials. Further, recent advances in the application of functionalization of carbon nanotube- and graphene-based materials for salt rejection and hydraulic permeation properties are discussed. © 2017, Springer International Publishing AG.Item Potential of Graphene-Functionalized Polymer Surfaces for Dental Applications: A Systematic review(Taylor and Francis Ltd., 2025) Singh, R.K.; Verma, K.; Kumar, G.C.; Jalageri, M.B.Graphene, a two-dimensional carbon nanomaterial, has garnered widespread attention across various fields due to its outstanding properties. In dental implantology, researchers are exploring the use of graphene-functionalized polymer surfaces to enhance both the osseointegration process and the long-term success of dental implants. This review consolidates evidence from in-vivo and in-vitro studies, highlighting graphene’s capacity to improve bone-to-implant contact, exhibit antibacterial properties, and enhance mechanical strength. This research investigates the effects of incorporating graphene derivatives into polymer materials on tissue response and compatibility. Among 123 search results, 14 articles meeting the predefined criteria were analyzed. The study primarily focuses on assessing the impact of GO and rGO on cellular function and stability in implants. Results indicate promising improvements in cellular function and stability with the use of GO-coated or composited implants. However, it is noted that interactions between Graphene derivatives and polymers may alter the inherent properties of the materials. Therefore, further rigorous research is deemed imperative to fully elucidate their potential in human applications. Such comprehensive understanding is essential for unlocking the extensive benefits associated with the utilization of Graphene derivatives in biomedical contexts. © 2024 Informa UK Limited, trading as Taylor & Francis Group.Item Reduced graphene oxide derived from used cell graphite and its green fabrication as an eco-friendly supercapacitor(Royal Society of Chemistry, 2014) Sudhakar, Y.N.; Muthu, M.; Bhat, D.; Senthil Kumar, S.Graphite extracted from a used primary cell was converted into reduced graphene oxide (rGO) using calcium carbonate together with rapid and local Joule heating by microwave irradiation. Electrodes were prepared by ultrasonically dispersing rGO in biodegradable poly(vinylpyrrolidone) (PVP) binder and coating this on recyclable poly(ethyleneterephthalate) (PET) sheet using a low cost screen printing technique. The use of the same polymer (PVP) as a binder, in addition to as the solid polymer electrolyte (SPE), enhances the compatibility and ionic conductivity of the hydrophobic rGO electrode in the supercapacitor system. Further, the phosphoric acid (H3PO4)-doped biodegradable SPE was screen printed for the first time on the rGO electrodes. Ionic conductivity and dielectric studies of the SPE were carried out at different temperatures and different dopant acid concentrations. The morphology, composition and structure of the graphene electrode components were characterized using Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) methods. Transmission electron microscopy (TEM) images showed a single layer or a few layers of rGO sheets and selected area electron diffraction showed the presence of slight defects. The fabricated environmentally friendly, industrially favorable and green supercapacitor showed a specific capacitance of 201 F g-1 and cyclic stability with 97% retention of the initial capacitance over 2000 cycles. Furthermore, the performance of this green supercapacitor is comparable to that of those fabricated using rGO synthesized from commercial graphite and in other literature reports. © 2014 The Royal Society of Chemistry.Item Structural health monitoring capabilities in ceramic-carbon nanocomposites(2014) Inam, F.; Badekai Ramachandra, B.R.; Vo, T.; Daoush, W.M.A novel method for analysing structural health of alumina nanocomposites filled with graphene nanoplatelets (GNP), carbon nanotubes (CNTs) and carbon black nano-particles (CB) is presented. All nanocomposites were prepared using novel colloidal processing and then by Spark Plasma Sintering. Good homogeneous dispersion was observed for all carbon filled materials. Nanocomposite bars were indented to produce sub-surface damage. Change in electrical conductivities were analysed after indentation to understand structural damage. For correlating change in electrical conductivity and indentation damage and understanding damage tolerance, mechanical properties were compared. Because of the systematically induced indentation damage, a sharp decrease of 86% was observed in the electrical conductivity of CNT nanocomposite as compared to 69% and 27% in the electrical conductivities of GNP nanocomposites and CB nanocomposites respectively. CNTs impart superior damage sensing capability in alumina nanocomposites, in comparison to GNP and CB, due to their fibrous nature, high aspect ratio and high electrical conductivity. © 2013 Elsevier Ltd and Techna Group S.r.l.Item Structural stability studies of graphene in sintered ceramic nanocomposites(Elsevier Ltd, 2014) Inam, F.; Vo, T.; Badekai Ramachandra, B.R.The post-sintering structural stability of graphene in alumina nanocomposites synthesised by Spark Plasma Sintering (SPS) and Hot Pressing (HP) was compared. Raman spectroscopy, thermogravimetric analyses and electrical conductivity analyses were conducted to characterise degradation of graphene due to the utilisation of different sintering techniques and conditions. Scanning Electron Microscopy confirmed good dispersion of graphene in SPSed and HPed sample. Graphene in SPSed and HPed nanocomposite samples sintered using longer durations (60 min) were found to possess higher crystallinity, thermal stability and electrical conductivity as compared to SPSed samples sintered using shorter sintering durations (10-20 min). This was attributed to the thermally induced graphitisation caused by longer sintering durations, which was lacking in SPSed samples processed using shorter sintering durations and lower temperature. No additional effect of DC pulsed current on the structural stability of graphene for nanocomposites were observed for samples prepared by SPS. © 2014 Elsevier Ltd and Techna Group S.r.l.Item Novel Co-Ni-graphene composite electrodes for hydrogen production(Royal Society of Chemistry, 2015) Subramanya, B.; Ullal, Y.; Shenoy, S.U.; Bhat, D.; Hegde, A.C.Active, stable and cost-effective electrocatalysts are key to water splitting for hydrogen production through electrolysis. Herein, we report the facile preparation of highly porous Co-Ni-graphene (Co-Ni-G) composite electrodes by electrodeposition for electrocatalytic applications. The incorporation of graphene into the Co-Ni matrix enhances the catalyst's activity for the hydrogen evolution reaction (HER) in an alkaline solution. The best coating exhibits a maximum current density of -850 mA cm-2 at -1.6 V, which is approximately 4 times better than that of the binary Co-Ni alloy indicating higher activity for hydrogen production. The addition of graphene to an electrolyte bath results in a porous encapsulated bundle of alloy nano-particles within the graphene network which effectively increases the electrochemically active surface area. As indicated by XPS analysis results, on addition of graphene the Co(0) and Ni(0) content in the deposit increases and as a result both cobalt/cobalt oxide and nickel/nickel oxide sites are evenly distributed on the Co-Ni-G electrode surface which is responsible for increased HER activity. The Tafel slope analysis showed that the HER follows a Volmer-Tafel mechanism. The structure-property relationship of the Co-Ni-G composite coating has been discussed by interpreting field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analysis results. © The Royal Society of Chemistry 2015.Item Novel eco-friendly synthesis of graphene directly from graphite using 2,2,6,6-tetramethylpiperidine 1-oxyl and study of its electrochemical properties(Elsevier B.V., 2015) Subramanya, B.; Bhat, D.K.Herein we report a simple, low cost, highly efficient and environment friendly one-pot method for the high throughput synthesis of graphene directly from graphite using 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO) and H2O2 under microwave irradiation. The formation mechanism of graphene nanosheets (GNS) as investigated by Raman spectroscopy and electron microscopy techniques reveal surface defect generation, intercalation and exfoliation as the main steps. The rapid and local Joule heating of graphite by microwave radiation results in simultaneous deoxygenation and exfoliation forming GNS. The as-synthesized GNS are a few layer thick with a high surface area of 937.6 m2 g-1 and a high C/O ratio of 9.2. These results open the perspective of replacing toxic oxidizing and reducing agents by environment friendly chemicals of similar efficacy, thus facilitating the large-scale production of GNS by a greener method. Furthermore, GNS exhibits good electrochemical performance with a large specific capacitance (197 F g-1), excellent rate capability and a long cycle life (1000 cycles) in neat 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF4) electrolyte. It also has a high energy density of 76.03 W h kg-1 while simultaneously possessing a high power density of 1.12 kW kg-1. © 2014 Elsevier B.V.Item Solar exfoliated graphene and its application in supercapacitors and electrochemical H2O2 sensing(Elsevier Ltd, 2015) Moolayadukkam, M.; Huang, N.M.; Nagaraja, H.S.In the present study, graphene nanosheets are synthesized using sunlight irradiation focussed onto graphite oxide. The morphological characteristics of graphene are examined using Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). Raman spectroscopy and X-ray diffraction (XRD) are used for the structural characterization of the sample. The electrochemical performance is evaluated using cyclic voltammetry (CV), charge-discharge characteristics and impedance spectroscopy. A high specific capacitance value of 223 F g-1 is obtained using cyclic voltammetry. The electrochemical detection of H2O2, a common biological species using solar graphene is demonstrated. The impedance spectroscopy and CV are used to study the electrocatalytic activity of the material. High sensitivity of 64.79 ?A mM-1 cm-2 is reported. © 2015 Elsevier Ltd. All rights reserved.Item Novel Fe-Ni-Graphene composite electrode for hydrogen production(Elsevier Ltd, 2015) Badrayyana, S.; Bhat, D.K.; Shenoy, U.S.; Ullal, Y.; Hegde, A.We have developed a novel, efficient and economical composite electrode for hydrogen production. The electrode has been formed by embedding graphene in the Fe-Ni matrix via room temperature electrodeposition. The obtained active coatings have been tested for their efficiency and performance as electrode surfaces for hydrogen evolution reaction (HER) in 6 M KOH by cyclic voltammetry and chronopotentiometry techniques. The coating obtained at 60 mA cm-2 exhibited approximately 3 times higher activity for hydrogen production than that of binary Fe-Ni alloy. Addition of graphene to electrolyte bath resulted in porous 3D projections of nano-sized spheres of Fe-Ni on the surface of graphene, which effectively increased the electrochemically active surface area. XPS analysis results showed the equal distribution of both Ni metal and NiO active sites on the composite. The addition of graphene favoured the deposition of metallic nickel, which accelerated the rate determining proton discharge reaction. All these factors remarkably enhanced the HER activity of Fe-Ni-Graphene (Fe-Ni-G) composite electrode. The Tafel slope analysis showed that the HER follows Volmer-Tafel mechanism. The structure-property relationship of Fe-Ni-G coating has been discussed by interpreting field emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analysis results. © 2015 Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.