Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
63 results
Search Results
Item A review on wrought magnesium alloys processed by equal channel angular pressing(Inderscience Publishers, 2015) Muralidhar, M.; Narendranath, S.; Shivananda Nayaka, H.S.Magnesium and its alloys with severe plastic deformation (SPD) techniques are more attractive as structural parts in many industrial applications because of their advantages. In this paper, the importance of wrought magnesium alloys with their applications to accomplish the essential development of components is reviewed. In addition, the different approaches of equal channel angular pressing (ECAP) process for refining the grain size to achieve the ultrafine grained material on the bulk metals are discussed. Recent developments in the ECAP process are outlined clearly with their importance to overcome many complexities. Various factors like processing temperature of a specimen, die geometry, ram speed, back pressure and processing routes influencing during ECAP process of wrought magnesium alloys at different conditions such as channel angle and corner or outer arc angle are discussed. Finally, the properties of ECAP processed wrought alloys are outlined for improving the microstructure in structural parts. © © 2015 Inderscience Enterprises Ltd.Item Effect of mushy state rolling on age-hardening and tensile behavior of Al-4.5Cu alloy and in situ Al-4.5Cu-5TiB2 composite(Elsevier Ltd, 2011) Siddhalingeshwar, I.G.; Herbert, M.A.; Chakraborty, M.; Mitra, R.The effect of mushy state rolling on aging kinetics of stir-cast Al-4.5Cu alloy and in situ Al-4.5Cu-5TiB2 composite and their tensile behavior in solution-treated (495°C) or differently aged (170°C) conditions, has been investigated. As-cast or pre-hot rolled alloy and composite samples were subjected to single or multiple mushy state roll passes to 5% thickness reduction at temperatures for 20% liquid content. Peak-aging times of mushy state rolled composite matrices have been found as ?7.5-10% of that of as-cast alloy. Such enhancement in aging kinetics is attributed to homogeneity in Cu atom distribution as well as increase in matrix dislocation density due to thermal expansion coefficient mismatch between Al and TiB2, matrix grain refinement and particle redistribution, achieved by mushy state rolling. Uniform precipitate distribution in mushy state rolled composite matrices leads to greater peak-age microhardness with higher yield and ultimate tensile strengths than those in as-cast alloy and composite. © 2010 Elsevier B.V.Item Influence of Ti, B and Sr on the microstructure and mechanical properties of A356 alloy(2011) Mallapur, D.G.; Kori, S.A.; Udupa, K.R.In the present investigation, the microstructural and mechanical properties study of A356 alloy have been discussed. The microstructural aspect of cast A356 alloy employed in the present study is strongly dependent on the grain refinement (Ti and B) and modification (Sr). The mechanical properties such as PS, UTS, %E, %R, YM and VHN have been investigated. This paper deals with the combined effect of grain refinement and modification, which improves the overall mechanical properties of the alloy. It is also a well-known fact that the mechanical properties of cast A356 alloy were improved by subjecting suitable melt treatment such as grain refinement, modification and mould vibration, etc. The quality of castings and their properties can be achieved by refining of ?-Al dendrites in A356 alloy by means of the addition of elements such as Ti and B which reduces the size of a-Al dendrites, which otherwise solidifies with coarse columnar a-Al dendritic structure. In addition, modification is normally adopted to achieve improved mechanical properties. Metallographic studies reveal that the structure changes from coarse columnar dendrites to fine equiaxed ones on the addition of grain refiner and further, plate like eutectic silicon to fine particles on addition of 0.20% of Al-10Sr modifier. The present result shows that a reduction in the size of a-Al dendrites, modification of eutectic Si and improvement in the mechanical properties were observed with the addition of grain refiner Al-3Ti, Al-3B and modifier Al-10Sr either individual addition or in combination. The change in the microstructure from coarse columnar ?-Al dendrites to fine equiaxed dendrites and plate like eutectic silicon to rounded particles leads to improved mechanical properties. © Springer Science+Business Media, LLC 2010.Item Influence of Ti, B and Sr on tribological properties of A356 alloy(2011) Mallapur, D.G.; Udupa, K.R.; Kori, S.A.The wear behaviour of an A356 alloy has been investigated in this paper. To understand the wear behaviour of the materials, the experiments were carried out using a pin on disc testing machine at various combinations of normal pressure, sliding speed and sliding distances. Tribological results reveal that weight loss of A356 alloy increases with increasing normal pressure and decreases with increasing sliding speed. Also, the results at microlevel revealed a structural change from coarse columnar dendrites to fine equiaxed ones on the addition of grain refiner (Al and B) and furthermore, plate-like eutectic silicon to fine particles on addition of modifier (Sr). It is further noted in the present study that addition of modifier does not disturb the influence of grain refiner and vice versa. Abrasive wear mechanism was interrupted by the formation of microwelds and later by oxidation of the Al matrix. © 2011 W. S. Maney & Son Ltd.Item Studies on the influence of grain refining and modification on microstructure and mechanical properties of forged A356 alloy(Elsevier Ltd, 2011) Mallapur, D.G.; Udupa, K.R.; Kori, S.A.Microstructure and mechanical properties of the forged A356 alloy have been investigated in this paper. Results reveals that at micro level forged structure was more refined than as in the as cast conditions. This is due to the work hardening effect, where the original structure is destroyed during the forging and recrystallization helped in creating large number of nucleating sites leading to fine grain structure. From the investigations on the mechanical properties, we deduce that the PS, UTS and hardness of forged materials are obviously higher than those of the ones treated with as cast condition without and with the addition of grain refiners and modifier. © 2011 Elsevier B.V.Item Effect of equal channel angular pressing on AZ31 wrought magnesium alloys(National Engg. Reaserch Center for Magnesium Alloys zhangdingfei@cqu.edu.cn, 2013) Muralidhar, A.; Narendranath, S.; Shivananda Nayaka, H.AZ31 wrought magnesium alloys are light weight materials which play an important role in order to reduces the environmental burdens in modern society because of its high strength to weight ratio, corrosion resistance, and stiffness and machinability. Applications of this material are mainly in structural component i.e., in constructions, automobile, aerospace, electronics and marine industries. In the present work, the microstructure characterization of the AZ31 alloys up to four ECAP passes at temperature of 573 K was observed for route Bc. Average grain size of the material was reduced from 31.8 ?m to 8 ?m after four ECAP passes. Mechanical properties of the alloy improved with increase in number of ECAP passes. Moreover, X-ray diffraction analysis was carried out for as received and ECAP processed material. © 2013 National Engineering Research Center for Magnesium Alloys of China, Chongqing University.Item Nano-ZnO particle addition to monolithic magnesium for enhanced tensile and compressive response(Elsevier Ltd, 2014) Seetharaman, S.; Nayak, U.; Sabat, R.K.; Suwas, S.; Almajid, A.; Gupta, M.In this study, the effects of nanoscale ZnO reinforcement on the room temperature tensile and compressive response of monolithic Mg were studied. Experimental observations indicated strength properties improvement due to nanoscale ZnO addition. A maximum increment in tensile yield strength by ?55% and compressive yield strength by 90% (with reduced tension-compression asymmetry) was achieved when 0.8 vol.% ZnO nanoparticles were added to Mg. While the fracture strain values under tensile loads were found to increase significantly (by ?95%, in case of Mg-0.48ZnO), it remained largely unaffected under compressive loads. The microstructural characteristics studied in order to comprehend the mechanical response showed significant grain refinement due to grain boundary pinning effect of nano-ZnO particles which resulted in strengthening of Mg. Texture analysis using X-ray and EBSD methods indicated weakening of basal fibre texture in Mg/ZnO nanocomposites which contributed towards the reduction in tension-compression yield asymmetry and enhancement in tensile ductility when compared to pure Mg. © 2014 Elsevier B.V. All rights reserved.Item Effect of combined grain refinement and modification on microstructure and mechanical properties of hypoeutectic, eutectic and hypereutectic Al-Si alloys(Inderscience Publishers, 2015) Shivaprasad, C.G.; Kiran Aithal, K.; Narendranath, S.; Desai, V.; Mukunda, P.G.The effect of melt treatment owing to the combined addition of grain refiner and modifier on the microstructure and mechanical properties of Al-Si alloys having 7% (hypoeutectic), 12% (eutectic) and 15% silicon (hypereutectic) is studied. 1 wt. % of Al-1Ti-3B Master alloy was used as grain refiner. For modification of eutectic Si, 0.2 wt. % of Al-10Sr Master alloy was added to hypoeutectic alloy and 0.4 wt. % is added to eutectic alloy as well as hypereutectic alloy. Furthermore, refinement of primary Si in hypereutectic alloy was achieved by addition of 0.04 wt. % of phosphorus. The goal of this investigation is to determine the influence of combined addition of grain refiner and modifier on mechanical properties and qualitatively correlate with the microstructural changes. © 2015 Inderscience Enterprises Ltd.Item Influence of combined grain refinement and modification on the microstructure, tensile strength and wear properties of Al-15Si, Al-15Si-4.5Cu alloys(Carl Hanser Verlag Kolbergerstrasse 22 Munchen D-81679, 2015) Channappagoudar, S.; Sannayallappa, N.; Desai, V.; Venkateswarlu, V.Microstructure, tensile strength and dry sliding wear studies of Al-15Si, Al-15Si-4.5Cu alloys with and without grain refinement and modifications are presented. Experimental alloys such as Al-15Si and Al-15Si-4.5Cu were conventionally melted and gravity die cast. For grain refinement, 1 wt.% of Al-1Ti-3B and for modification, 0.17 wt.% of aluminum phosphide (AlP) and 0.4 wt.% of Al-10Sr were added to the alloy melt. The results reveal refined microstructure due to grain refinement, modification, improved hardness, higher tensile strength and better sliding wear. Moreover, Al-15Si-4.5Cu alloy (untreated and treated) showed improved mechanical properties as compared to conventional hypereutectic Al-Si alloy. © Carl Hanser Verlag GmbH & Co. KG.Item Influence of combined grain refinement and modification on the Microstructure, tensile strength and wear properties of Al-15Si, Al-15Si-4.5Cu alloys(Carl Hanser Verlag Kolbergerstrasse 22 Munchen D-81679, 2015) Channappagoudar, S.; Sannayallappa, N.; Desai, V.; Venkateswarlu, V.Microstructure, tensile strength and dry sliding wear studies of Al-15Si, Al-15Si-4.5Cu alloys with and without grain refinement and modifications are presented. Experimental alloys such as Al-15Si and Al-15Si-4.5Cu were conventionally melted and gravity die cast. For grain refinement, 1 wt.% of Al-1Ti-3B and for modification, 0.17 wt.% of aluminum phosphide (AlP) and 0.4 wt.% of Al-10Sr were added to the alloy melt. The results reveal refined microstructure due to grain refinement, modification, improved hardness, higher tensile strength and better sliding wear. Moreover, Al-15Si-4.5Cu alloy (untreated and treated) showed improved mechanical properties as compared to conventional hypereutectic Al-Si alloy. © Carl Hanser Verlag GmbH & Co. KG ISSN 1862-5282.