Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
87 results
Search Results
Item A simple and selective complexometric method for the determination of thallium(III) is proposed by using thioglycolic acid as a masking agent. In the presence of diverse metal ions thallium(III) is complexed with excess EDTA and the surplus EDTA is back titrated (pH 5 - 6 , hexamine) with standard zinc sulphate solution using xylenol orange indicator. A freshly prepared 1% aqueous solution of thioglycolic acid is then added to displace EDTA from Tl(III)-EDTA complex and the released EDTA is titrated with standard zinc sulphate solution. The results for the determination of 4 - 87 mg of thallium are obtained with a relative error of 0.3% and coefficient of variation 0.46%. The effect of diverse ions are studied. The method is applied to the determination of thallium in its complexes and synthetic mixtures.(Indirect complexometric determination of thallium(III) using thioglycolic acid as masking agent) Shetty, P.; Nityananda Shetty, A.N.; Gadag, R.V.2000Item A simple, rapid, selective and sensitive spectrophotometric method for the determination of platinum has been proposed based on the colour reaction between platinum(IV) and piperonal thiosemicarbazone (PATS) in 0.008 - 0. 032 M sulphuric acid medium. The greenish yellow complex has an absorption maximum at 360 nm. Beer's law is obeyed upto 6.5 ppm of Pt and the optimum concentration range is 1 - 5.1 ppm of Pt. The molar absorptivity and Sandell's sensitivity are 3. 239 x 104 1 mol-1 cm-1 and 0.006 ?g cm-2, respectively. The optimum conditions for complete colour development have been investigated by studying parameters like effect of medium, acidity, reagent concentration, time period and effect of diverse ions. The method is used for the determination of platinum in hydrogenation catalysts and platinum complexes.(Rapid spectrophotometric determination of platinum (IV) using piperonal thiosemicarbazone) Shetty, P.; Nityananda Shetty, A.N.; Gadag, R.V.2002Item A simple, rapid and accurate complexometric method for the determination of palladium(II) is proposed, based on the selective demasking property of 2-mercapto propionyl glycine (MPGH2) towards palladium(II). In the presence of diverse metal ions, palladium(II) is complexed with excess of EDTA and the surplus EDTA is back titrated at pH 5-5.5 (acetic acid-acetate buffer) with standard zinc sulphate solution using xylenol orange as indicator. An excess of a 0.2% aqueous solution of MPGH2 is then added to displace EDTA from Pd(II)-EDTA complex. The released EDTA is titrated with the same standard zinc sulphate solution as before. Reproducible and accurate results are obtained in the concentration range 2-22 mg of palladium with relative error of ±0.36% and coefficient of variation (n=6) not exceeding 0.31%. The effect of diverse ions are studied. The method is used for the determination of palladium in its complexes, catalysts and synthetic alloy mixtures.(Complexometric determination of palladium(II) using 2-mercapto propionyl glycine as demasking agent) Shetty, P.; Nityananda Shetty, A.N.; Gadag, R.V.2002Item A simple, rapid, selective and sensitive spectrophotometric method for the determination of palladium is proposed using piperonal thiosemicarbazone (PATS) as a reagent. The reagent forms a 1:2 complex (Pd:Reagent) with palladium. The yellow complex is soluble in 32-40% ethanol and has an absorption maximum at 363 nm. Beer's law is obeyed upto 3.85 ppm of palladium and the optimum concentration range is 0.5-2.45 ppm of Pd. The molar absorptivity and Sandell's sensitivity are 3. 80 x 104 dm3 mol-1 cm -1 and 2.8 x 10-3 ?g cm-2, respectively. The experimental conditions for complete colour development and the interference from various ions are investigated. The method is used for the determination of palladium in its complexes and synthetic mixtures.(Spectrophotometric determination of palladium(II) using piperonal thiosemicarbazone) Shetty, P.; Nityananda Shetty, A.N.; Gadag, R.V.2003Item A selective complexometric method is described for the determination of mercury(II) using sodium metabisulphite as a masking reagent. An excess of EDTA is added to mercury(II) solution containing associated diverse metal ions and the surplus EDTA is back titrated at pH 5-6 (hexamine buffer) with standard zinc sulphate solution using xylenol orange as indicator. An aqueous solution of sodium metabisulphite is then added to displace EDTA selectively from Hg-EDTA complex and the released EDTA is then titrated against the same standard zinc sulphate solution. Reproducible and accurate results are obtained in the range 4-100 mg of mercury with a relative error ? 0.26% and coefficient of variation ?0.40%. The method is useful for the analysis of mercury in complexes and alloy samples.(Complexometric method for the determination of mercury using sodium metabisulphite as selective masking reagent) Shetty, P.; Nityananda Shetty, A.N.2004Item A simple, rapid and selective complexometric method is proposed for the determination of mercury(II) in the presence of associated metal ions. Mercury(II) is first complexed with an excess of EDTA and the surplus EDTA is titrated against standard zinc sulphate solution at pH 5-6 using xylenol orange indicator. Glutathione is then added to displace EDTA from the Hg-EDTA complex quantitatively and the EDTA released is back titrated against a standard zinc sulphate solution as before. The method works well in the range 4 to 80 mg of mercury with a relative error of less than 0.30% and a coefficient of variation of not more than 0.38%. The effect of the presence of various diverse ions has been studied. The method is used for the determination of mercury(II) in its alloys and complexes.(Rapid complexometric determination of mercury(II) using glutathione as a selective demasking reagent) Shetty, P.; Nityananda Shetty, A.N.2004Item A complexometric method for the determination of mercury(II) in presence of other metal ions is described based on the selective masking action of 2-mercaptopropionic acid towards mercury(II). Mercury(II) present in a given sample solution is first complexed with an excess of EDTA and the unreacted EDTA is titrated against zinc sulphate solution at pH 5-6 (hexamine buffer) using xylenol orange as the indicator. A 0.5% aqueous solution of 2-mercaptopropionic acid is then added to displace EDTA from the Hg(II)-EDTA complex. The released EDTA is estimated. Reproducible and accurate results are obtained for 4-88 mg of mercury(II) with relative error less than ± 0.46% and coefficient of variation not more than 0.34%. The effects of various ions were studied. The method is used for the analysis of mercury in its synthetic alloy mixtures and also in complexes.(Indirect complexometric determination of mercury(II) using 2-mercaptopropionic acid (2-MPA) as a selective masking agent) Karthikeyan, J.; Parameshwara, P.; Nityananda Shetty, A.N.; Shetty, P.2005Item Sodium dithionite is proposed as a new demasking agent for the rapid and selective complexometric determination of thallium(III). In the presence of diverse metal ions, thallium (III) was first complexed with excess EDTA and the surplus EDTA was then titrated with a standard zinc sulphate solution at pH 5-6 (hexamine buffer) using Xylenol Orange as the indicator. The EDTA equivalent to thallium was then released selectively with sodium dithionite and back titrated with a standard zinc sulphate solution as before. Reproducible and accurate results were obtained in the range 4 - 100 mg of thallium with a relative error of ±27 % and a coefficient of variation (n = 6) of not more than 0.30 %. The effects of various diverse ions were studied. The method was applied to the determination of thallium in its complexes and in alloys.(Serbian Chemical Society, Sodium dithionite as a selective demasking agent for the complexometric determination of thallium) Shetty, P.; Nityananda Shetty, A.N.2005Item The inhibition of corrosion of mild steel in 0.01-0.1 N HCl solutions by N-cyclohexyl-N?-phenyl thiourea (CPTU) has been studied using potentiodynamic polarization technique. Results obtained reveal that CPTU performs excellently as anodic inhibitor for mild steel in HCl solution. The inhibitor functions through adsorption following Temkins' adsorption isotherm. The influence of parameters like temperature, hydrochloric acid concentration and inhibitor concentration on the corrosion of mild steel has also been studied.(Inhibition of corrosion of mild steel in hydrochloric acid by N-cyclohexyl-N?- phenyl thiourea) Shetty, S.D.; Shetty, P.; Nayak, H.V.S.2005Item A complexometric method for the determination of mercury(II) in presence of other metal ions is described based on the selective masking action of 1-propane thiol towards mercury(II). Mercury(II) present in a given sample solution is first complexed with an excess of EDTA and the unreacted EDTA is titrated against lead nitrate solution at pH 5-6 (hexamine buffer) using xylenol orange as the indicator. A 0.8% aqueous solution of 1-propane thiol is then added to displace EDTA from the Hg(II)-EDTA complex. The released EDTA is titrated with standard lead nitrate solution as before. Reproducible and accurate results are obtained for 4-85 mg of mercury(II), with relative error less than ±0.23% and coefficient of variation not more than ±0.41%. The effects of various ions were studied. The method is used for the analysis of mercury(II) in its synthetic alloy mixtures and also in complexes.(Indirect complexometric determination of mercury(II) using 1-propane thiol (PT) as a selective masking agent) Parameshwara, P.; Karthikeyan, J.; Nityananda Shetty, A.N.; Shetty, P.2005