Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
4 results
Search Results
Item Knowledgeable network-on-chip accelerator for fast and accurate simulations using supervised learning algorithms and multiprocessing(Inderscience Publishers, 2022) Kumar, A.; Talawar, B.In a multi-processor system-on-chip (MPSoC) environment, networks-on-chip (NoC) is becoming the de-facto scaling communication technique. One of the most significant techniques used in NoC for analysing and testing new architectures is simulations. Simulation is one of the main tools used in NoC for analysing and testing new architectures. To achieve the best performance vs. cost tradeoff, simulators have become an essential tool. Software simulators are too slow for evaluating large-scale NoCs. To overcome this problem we propose an NoC Accelerator named knowledgeable network-on-chip accelerator (KNoC) which can be used to analyse various NoC architectures. The proposed accelerator is built using machine learning (ML) algorithms and multiprocessing to predict the design parameters of NoCs with a fixed and accurate delay between nodes of large-scale architectures. The KNoC results were compared to the widely used cycle-accurate Booksim simulator. KNoC showed an error rate of less than 6% and an overall speedup of up to 12 Kx. © © 2022 Inderscience Enterprises Ltd.Item Effect of dry torrefaction pretreatment of the microwave-assisted catalytic pyrolysis of biomass using the machine learning approach(Elsevier Ltd, 2022) Ramesh, R.; Suriapparao, D.V.; Sankar Rao, C.S.; Sridevi, V.; Kumar, A.This study employs the Leave-One-Out cross-validation approach to build a machine-learning model using polynomial regression to predict pyro product yield through microwave-assisted pyrolysis of sawdust over KOH catalyst and graphite powder a susceptor. The determination of coefficient (R2) validates the developed models. All the developed models achieved a high prediction accuracy with R2 > 0.93, which signifies that the experimental values are in good agreement with the predicted one. The dependence of the catalyst loading and pretreatment temperature on dominating process parameters such as heating rate, pyrolysis temperature, susceptor thermal energy, and pyro products, namely bio-oil, biochar, and biogas, are explored. The yield of biochar is reduced; however, bio-oil and biogas are enhanced as the catalyst loading increased. On the other hand, increasing the temperature of pretreated sawdust decreased bio-oil and biogas yields while increasing biochar yields. Further, microwave conversion efficiency, and susceptor thermal energy increased with increased catalyst quantity and pretreatment temperatures of sawdust. It was observed that the average heating rate was increased by increasing the catalyst quantity while maintaining the same pyrolysis time until pretreatment temperatures of 150 °C were reached, after which the heating rate dropped due to the continuous microwave energy input to the system. © 2022 Elsevier LtdItem The effect of torrefaction temperature and catalyst loading in Microwave-Assisted in-situ catalytic Co-Pyrolysis of torrefied biomass and plastic wastes(Elsevier Ltd, 2022) Ramesh, R.; Suriapparao, D.V.; Sankar Rao, C.S.; Sridevi, V.; Kumar, A.; Shah, M.In the current study, the effect of torrefaction temperatures (125–175 °C) and catalyst quantity (5–15 g) on co-pyrolysis of torrefied sawdust (TSD) and polystyrene (PS) are investigated to obtain value-added products. The role of torrefaction in co-pyrolysis of TSD: PS was analyzed to understand the product yields, synergy, and energy consumption. As the torrefaction temperature increases, oil yield (48.3–59.6 wt%) and char yield (24.3–29 wt%) increase while gas yield (27.4–11.4 wt%) decreases. Catalytic co-pyrolysis showed a significant level of synergy when compared to non-catalytic co-pyrolysis. For the conversion (%), a positive synergy maximum (-2.6) exists at a torrefaction temperature of 175 °C and 15 g of KOH catalyst. To develop the model, polynomial regression-based machine learning was used to predict pyrolysis product yields and energy usage variables. The developed models showed significant prediction accuracy (R2 > 0.98), suggesting the experimental values and the predicted values matched well. © 2022 Elsevier LtdItem Exploring and understanding the microwave-assisted pyrolysis of waste lignocellulose biomass using gradient boosting regression machine learning model(Elsevier Ltd, 2024) Sinha, S.; Sankar Rao, C.; Kumar, A.; Venkata Surya, D.; Basak, T.The production of bio-oil is a complex process influenced by various parameters. Optimizing these parameters can significantly enhance bio-oil yield, thus improving process efficiency. This study aims to develop a predictive model for bio-oil yield using the Gradient Boosting Regression (GBR) technique. It also seeks to identify the key factors affecting bio-oil yield and determine the optimal conditions for maximizing production. The GBR model was constructed using data collected from the literature. The model's performance was evaluated based on its determination coefficients for training and testing datasets. Optimization studies were conducted to identify the best conditions for bio-oil production. The GBR model demonstrated high precision, with determination coefficients of 0.983 and 0.913 for the training and testing datasets, respectively, indicating its effectiveness in predicting bio-oil yield. The optimal conditions for maximizing bio-oil yield were identified as 20 min of pyrolysis time, a temperature of 771 °C, and 524W of microwave power. The two-way PDP analysis provided valuable insights into the interactive effects of temperature with other factors, enhancing the understanding of the dynamics of the bio-oil production process. This study not only identifies the most impactful variables for bio-oil yield but also offers critical guidance for optimizing the production process. © 2024 Elsevier Ltd