Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
3 results
Search Results
Item Effect of thickness and thermal conductivity of metal foams filled in a vertical channel – a numerical study(Emerald Publishing, 2019) Kotresha, B.; Gnanasekaran, N.Purpose: This paper aims to discuss about the two-dimensional numerical simulations of fluid flow and heat transfer through high thermal conductivity metal foams filled in a vertical channel using the commercial software ANSYS FLUENT. Design/methodology/approach: The Darcy Extended Forchheirmer model is considered for the metal foam region to evaluate the flow characteristics and the local thermal non-equilibrium heat transfer model is considered for the heat transfer analysis; thus the resulting problem becomes conjugate heat transfer. Findings: Results obtained based on the present simulations are validated with the experimental results available in literature and the agreement was found to be good. Parametric studies reveal that the Nusselt number increases in the presence of porous medium with increasing thickness but the effect because of the change in thermal conductivity was found to be insignificant. The results of heat transfer for the metal foams filled in the vertical channel are compared with the clear channel in terms of Colburn j factor and performance factor. Practical implications: This paper serves as the current relevance in electronic cooling so as to open up more parametric and optimization studies to develop new class of materials for the enhancement of heat transfer. Originality/value: The novelty of the present study is to quantify the effect of metal foam thermal conductivity and thickness on the performance of heat transfer and hydrodynamics of the vertical channel for an inlet velocity range of 0.03-3 m/s. © 2018, Emerald Publishing Limited.Item Determination of interfacial heat transfer coefficient for the flow assisted mixed convection through brass wire mesh(Elsevier Masson SAS 62 rue Camille Desmoulins Issy les Moulineaux Cedex 92442, 2019) Kotresha, B.; Gnanasekaran, N.In this work, a numerical investigation of Darcy?Forchheimer mixed convection from a heated vertical flat plate embedded in a brass wire mesh porous medium is carried out to determine the coupled effects of flow and thermal diffusion. The numerical model consists of a two dimensional computational domain in which conjugate heat transfer analysis is performed to predict the hydrodynamic and thermal performance of the brass wire mesh in a vertical channel using Local Thermal Non-Equillibrium (LTNE) model. The novelty of the present study is to acquire the interfacial heat transfer coefficient, an as yet another challenging task, of the wire mesh porous medium so as to provide a quick and feasible solution to modeling of fluid flow and heat transfer through brass wire mesh porous media. The results of heat transfer through brass wire mesh are reported in terms of Colburn j factor, performance factor and are compared with other porous mediums available in literature. The present study not only opens up new vistas for more parametric studies but also provides practical and cost effective assessment to design new porous materials. © 2018 Elsevier Masson SASItem Numerical Simulations of Flow-Assisted Mixed Convection in a Vertical Channel Filled with High Porosity Metal Foams(Taylor and Francis Ltd., 2020) Kotresha, B.; Gnanasekaran, N.; Balaji, C.In this work, two-dimensional numerical simulations of flow-assisted mixed convection in a vertical channel filled with high porosity metal foams have been carried out by using the commercial ANSYS FLUENT. In order to enhance heat transfer, the vertical channel is filled with aluminum metal foams of different pores per inch (PPI). Four different metal foams PPI 10, 20, 30, and 45, with porosity values varying from 0.90 to 0.95 are considered in this study. The geometry under consideration consists of metal foam attached to the aluminum plate in the vertical channel and the resulting problem becomes conjugate heat transfer. The metal foam region is considered as a homogeneous porous medium with the Darcy Extended Forchheirmer model to evaluate the flow characteristics while the local thermal non-equilibrium heat transfer model is considered for the heat transfer analysis. Initially, numerical results are compared with the experimental results available in literature and the agreement was found to be good. Parametric studies show that as the metal foam PPI increases, the pressure drop increases, while the heat transfer is seen to increase with an increase in the pore density of the metal foam. © 2019, © 2019 Taylor & Francis Group, LLC.