Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
4 results
Search Results
Item Formation of microstructural features in hot-dip aluminized AISI 321 stainless steel(University of Science and Technology Beijing, 2018) Huilgol, P.; Rajendra Udupa, K.; Udaya Bhat, K.Hot-dip aluminizing (HDA) is a proven surface coating technique for improving the oxidation and corrosion resistance of ferrous substrates. Although extensive studies on the HDA of plain carbon steels have been reported, studies on the HDA of stainless steels are limited. Because of the technological importance of stainless steels in high-temperature applications, studies of their microstructural development during HDA are needed. In the present investigation, the HDA of AISI 321 stainless steel was carried out in a pure Al bath. The microstructural features of the coating were studied using scanning electron microscopy and transmission electron microscopy. These studies revealed that the coating consists of two regions: an Al top coat and an aluminide layer at the interface between the steel and Al. The Al top coat was found to consist of intermetallic phases such as Al7Cr and Al3Fe dispersed in an Al matrix. Twinning was observed in both the Al7Cr and the Al3Fe phases. Furthermore, the aluminide layer comprised a mixture of nanocrystalline Fe2Al5, Al7Cr, and Al. Details of the microstructural features are presented, and their formation mechanisms are discussed. © 2018, University of Science and Technology Beijing and Springer-Verlag GmbH Germany, part of Springer Nature.Item Metastable microstructures at the interface between AISI 321 steel and molten aluminum during hot-dip aluminizing(Elsevier B.V., 2018) Huilgol, P.; Udupa, K.R.; Bhat, K.U.The microstructure at the interface between AISI 321 stainless steel and molten aluminum was investigated which occurs during the process of hot-dip aluminizing. Microstructural characterization was carried out by scanning electron microscopy, transmission electron microscopy and X-ray diffraction. The study revealed the formation of metastable FeAlm and multiple twinned Al13Fe4 phases at the interface between steel and aluminum. Multiple twinned Al13Fe4 phase exhibits pseudo tenfold electron diffraction pattern. Another metastable phase Al3(NiFe) with an orthorhombic structure was formed as one of the eutectic phase mixture in the solidified aluminum topcoat. The Al3(NiFe) phase in the eutectic shares crystallographic orientation relationship with the Al matrix. Metastable intermetallic phases are being reported for the first time during hot-dip aluminizing. © 2018 Elsevier B.V.Item Precipitate evolution during severe plastic deformation of cast Al-Zn-Mg alloys and their thermal stability(Institute of Physics Publishing helen.craven@iop.org, 2019) Manjunath, G.K.; Huilgol, P.; Preetham Kumar, G.V.P.; Bhat, K.U.In the current investigation, an effort was made to understand the precipitate evolution process during equal channel angular pressing (ECAP) of an alloy composed of only aluminium, zinc and magnesium. For this purpose, three different compositions of cast Al-Zn-Mg alloys were selected and ECAP processed in route BC upto four passes. Microstructural observations indicated that, ECAP processing leads to refined structure possessing high density dislocations and large amount of grains with high angle grain boundaries. The precipitate volume in the alloys increased with increase in the zinc quantity in the alloy. Microstructural characterization through transmission electron microscope (TEM) and differential scanning calorimeter (DSC) revealed that, processing by ECAP results in structure having stable ? phase precipitates without the presence of GP zones and intermediate ?? phase precipitates. Thereby demonstrates that, ECAP process accelerates the precipitation kinetics and also shifts the morphology of the precipitates. Higher mechanical properties were noticed in the alloy containing large quantity of MgZn2 precipitates. © 2018 IOP Publishing Ltd.Item Microstructural investigations on the hot-dip aluminized AISI 321 stainless steel after diffusion treatment(Elsevier B.V., 2019) Huilgol, P.; Udupa, K.R.; Bhat, K.U.The microstructure of the hot-dip aluminized AISI 321 stainless steel was studied after diffusion treatment at 900 °C for 3 h. The microstructural characterization was carried out by scanning electron microscopy, transmission electron microscopy, and X-ray diffractometry. The microstructure of the as aluminized steel consisted of two regions, viz.; aluminum topcoat and aluminide layer. During the diffusion treatment, the coating transformed into a layered structure consisting of four layers. The Fe2Al5 phase was formed in the outermost layer and the presence of Al13Fe4 quasicrystalline approximant phase was observed. The innermost layer adjacent to the base metal transformed to ferrite phase with NiAl precipitates. Next, to this layer, a disordered FeAl phase was observed. The lattice parameter of the disordered FeAl phase was found to be larger than that of the ordered B2 FeAl phase. The layer between outer Fe2Al5 phase and disordered FeAl phase consists of a mixture of three phases, namely Fe2Al5, disordered FeAl and a new phase with the simple cubic structure. The phase with simple cubic structure shares cube on cube crystallographic orientation relationship with the disordered FeAl phase. © 2019 Elsevier B.V.