Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
4 results
Search Results
Item Performance Analysis of Spectrum Sharing Radar in Multipath Environment(Institute of Electrical and Electronics Engineers Inc., 2023) Gunnery, G.; Pardhasaradhi, B.; Mahipathi, A.C.; Prashantha Kumar, P.K.; Srihari, P.; Cenkarmaddi, L.R.Radar based sensing and communication systems sharing a common spectrum have become a potential research problem in recent years due to spectrum scarcity. The spectrum sharing radar (SSR) is a new technology that uses the total available bandwidth (BW) for both radar based sensing and communication. Unlike traditional radar, the SSR divides the total available BW into radar-only and mixed-use bands. In a radar-only band, only radar sensor signals can be transmitted and received. In contrast, radar and communication signals can both be transmitted and received in the mixed-use band. Taking such BW sharing into account, this paper investigates the performance of SSR in an information-theoretic sense. To evaluate performance, mutual information (MI), spectral efficiency (SE) and capacity (C) metrics are used. Initially, this paper considered a clean environment (no multipath) in order to evaluate performance metrics in the mixed-use band with and without successive interference cancellation. Following that, this paper addresses the performance of BW allocation by allocating low to high BW in mixed-band. Furthermore, the performance metrics are extended to account for the multipath environment, and the same analogy as in a clean environment is used. In addition, the MI and SE of traditional radar system is taken into account when comparing the performance of SSR with and without the use of the SIC. Finally, MI and capacity results show that using the SIC scheme in a mixed-use band yields performance comparable to traditional radar and communication system. In terms of SE, the SSR with SIC scheme outperforms traditional radar and communication system. © 2020 IEEE.Item Multitarget Detection and Tracking by Mitigating Spot Jammer Attack in 77-GHz mm-Wave Radars: An Experimental Evaluation(Institute of Electrical and Electronics Engineers Inc., 2023) Kumuda, D.K.; Vandana, G.S.; Pardhasaradhi, B.; Raghavendra, B.S.; Srihari, P.; Cenkarmaddi, L.R.Small form factor radar sensors at millimeter wavelengths find numerous applications in the industrial and automotive sectors. These radar sensors provide improved range resolution, good angular resolution, and enhanced Doppler resolution for short range and ultrashort ranges. However, it is challenging to detect and track the targets accurately when a radar is interfered by another radar. This article proposes an experimental evaluation of a 77-GHz IWR1642 radar sensor in the presence of a second 77-GHz AWR1642 radar sensor acting as a spot jammer. A real-time experiment is carried out by considering five different targets of various cross sections, such as a car, a larger size motorcycle, a smaller size motorcycle, a cyclist, and a pedestrian. The collected real-time data are processed by four different constant false alarm rate detectors, cell averaging (CA)-CFAR, ordered statistics (OS)-CFAR, greatest of CA (GOCA)-CFAR, and smallest of CA (SOCA)-CFAR. Following that, data from these detectors are fed into two different clustering algorithms (density-based spatial clustering of applications with noise (DBSCAN) and K-means), followed by the extended Kalman filter (EKF)-based tracker with global nearest neighbor (GNN) data association, which provide tracks of various targets with and without the presence of a jammer. Furthermore, four different metrics [tracks reported (TR), track segments (TSs), false tracks (FTs), and track loss (TL)] are used to evaluate the performance of various tracks generated for two clustering algorithms with four detection schemes. The experimental results show that the DBSCAN clustering algorithm outperforms the K-means clustering algorithm for many cases. © 2001-2012 IEEE.Item A Survey on Waveform Design for Radar-Communication Convergence(Institute of Electrical and Electronics Engineers Inc., 2024) Chakravarthi Mahipathi, A.; Pardhasaradhi, B.; Lingadevaru, P.; Srihari, P.; D'Souza, J.; Cenkarmaddi, L.R.To provide service to an abundant number of communication users and to avoid the spectrum scarcity problem, many researchers are fascinated to work towards the convergence of radar sensing and communication systems. In addition, future intelligent systems like autonomous vehicles, Vehicle-to-everything (V2X), Unmanned Aerial Vehicles (UAV), and all smart systems are going to implement both radar and communication systems on the same platform, which motivates the researchers to focus on the development of Joint Radar-Communication Systems (JRCS). Cooperative Radar-Communication System (CRCS) and Dual Functional Radar Communication (DFRC) systems provide an opportunity for communication users to utilize radar resources without disturbing radar operation. Waveform design is essential in the development of new models and designs related to joint radar-sensing and communication systems. A cooperative radar communication system uses separate waveforms for radar and communication systems. The DFRC system uses the same waveform for radar and communication operations. So to model both joint radar communication systems one should have a clear idea regarding waveform design and its approaches. Therefore, this review paper focused on different waveform design approaches for modeling CRCS and DFRC systems. In addition, the prime objective of this review paper is to give a detailed view of the existing cooperative and dual-function waveform design approaches and provide a kick-start for new learners to work on this area. © 2023 IEEE.Item FPGA Implementation of SSRS Codes for NAND Flash Memory Device(Institute of Electrical and Electronics Engineers Inc., 2024) Achala, G.; Nandana, S.; Jomy, F.; Girish, M.M.; Shripathi Acharya, U.S.; Srihari, P.; Cenkarmaddi, L.R.NAND flash memory is a non-volatile storage device that is extensively used in personal electronic gadgets, digital television, digital cameras, and many consumer/ professional electronics devices. Error control coding techniques have been incorporated to improve the integrity of information stored in these devices. We have synthesized the Subfield Subcodes of Reed Solomon codes (SSRS) for use on Multi-Level cell (MLC), Triple Level Cell (TLC), and Quadruple Level Cell (QLC) NAND flash devices. The primary advantage of these codes is that the codeword symbols can be correctly matched to the number of bits that can be stored in these multilevel cells. Deployment of these codes improves the integrity of information storage and useful life. This paper describes the implementation of the encoder and decoder of SSRS codes synthesized for MLC, TLC, and QLC NAND flash devices. The encoder circuit is designed using addition and multiplication tables derived from elements of synthesized SSRS codes. The Non-binary decoding procedure consists of the syndrome computation, Berlekamp -Massey algorithm, Chein search, and Forney's algorithm. The designed encoder requires 16% resources for MLC, 18% of resources for TLC, and 18% of resources for QLC. This research work has reported the design of very high rate (R ≥ 0.97) codes that can bring about significant improvements to the Undetected Bit Error Rate (UBER) even when the Raw Bit Error rate (RBER) values are significant (> 10-3). © 2013 IEEE.