Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
5 results
Search Results
Item Influence of nano-aluminum-hydroxide on tribological, mechanical and flammability properties of E-glass fabric/epoxy multi-layered laminates(Huthig GmbH, 2014) Shivamurty, B.; George, G.; Bhat, K.U.; Anandhan, S.E-glass fabric/nano aluminum hydroxide (ATH)/epoxy composites were prepared by manual lay-up and compression molding. An image processing tool was used to quantify fineness of dispersion of nano-ATH particles in epoxy. Fourier transform infrared (FTIR) spectroscopy was used to understand the interaction between nano-ATH and epoxy. Mechanical properties, sliding wear resistance and fire retardance of these composites improved upon addition of nano-ATH. The composite containing 0.125 wt% of nano-ATH exhibited optimum mechanical properties and low specific wear rate.Item Preparation and antifouling properties of PVDF ultrafiltration membranes with polyaniline (PANI) nanofibers and hydrolysed PSMA (H-PSMA) as additives(Elsevier, 2014) Pereira, V.R.; Isloor, A.M.; Bhat, K.U.; A.F., A.F.Polyaniline (PANI) nanofibers were used as hydrophilic additives to study their effect on the performance of polyvinylidene fluoride (PVDF) ultrafiltration (UF) membranes. PVDF UF membranes were prepared by the phase inversion method with hydrolyzed polystyrene-co-maleic anhydride (H-PSMA) and PANI nanofibers as additives. PANI nanofibers were synthesized by rapid mixing reaction and were used as a hydrophilic modifying agent with varying concentrations (0-1.5 wt.%) in the membranes. The synthesized PANI nanofibers were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and transmission electron microscope (TEM) analysis. Hydrolyzed PSMA was prepared by the hydrolysis of PSMA and was used as a novel pore forming additive. The addition of PANI nanofibers into the membranes increased the membrane hydrophilicity, porosity, water uptake and permeability. The membranes also showed good antifouling nature during BSA (bovine serum albumin) filtration when compared to the pristine membrane without PANI nanofibers. Membrane with 1.0 wt.% PANI content showed highest permeability among the synthesized membranes. The membrane having highest permeability was subjected to heavy metal ion rejection which showed high rejection of 98.52% and 97.38% for heavy metal ions Pb2+ and Cd2+ respectively. © 2014 Elsevier B.V.Item Preparation and performance studies of polysulfone-sulfated nano-titania (S-TiO2) nanofiltration membranes for dye removal(Royal Society of Chemistry, 2015) Pereira, V.R.; Isloor, A.M.; Bhat, K.U.; A.F., A.F.; AlObaid, A.; Fun, H.-K.Polysulfone nanofiltration membranes containing sulfated nano-titania (S-TiO2) were fabricated, with the aim to enhance the membrane properties along with the possible rejection of Methylene Blue (MB) dye by membranes. Initially S-TiO2 was synthesized from nano TiO2 by the action of sulfuric acid. The synthesized S-TiO2 was characterized by Fourier Transform Infrared spectroscopy (FT-IR), Energy Dispersive Spectrophotometry (EDS) and Transmission Electron Microscopy (TEM) analysis. S-TiO2 was added in increasing concentrations into the membranes and its effect on the performance of the membranes was evaluated. The synthesized membranes were characterized by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). Polysulfone membranes containing S-TiO2 showed enhancement in properties in terms of hydrophilicity, water uptake, mechanical strength, improved pure water flux (PWF), antifouling nature and high Flux Recovery Ratio (FRR). The polysulfone membranes with S-TiO2 showed 99% rejection for BSA (Bovine Serum Albumin) protein molecules during BSA filtration. The prepared membranes were used for the removal of MB dye from aqueous solutions. A maximum of 90.4% rejection was obtained for MB for the membrane having 2.0 wt% of S-TiO2 under UV light radiation. This approach showed that polysulfone-S-TiO2 membranes displayed good efficiency for dye removal and can be effectively used for the removal of MB dye from aqueous solutions under suitable conditions. © The Royal Society of Chemistry.Item Optimised microwave-assisted biosynthesis of silver nanoparticles from Nothapodytes foetida leaf extracts and its anti-microbial activities(Taylor and Francis Ltd. michael.wagreich@univie.ac.at, 2016) Roopesh, R.; Geedhika, G.; D'Souza, J.; Anandhan, S.; Bhat, K.U.; Jaya M, J.; Fathima B, S.; Mohan Balakrishnan, R.M.The present investigation reports the biogenesis of silver nanoparticles (Ag NPs) using extracts of a medicinal plant Nothapodytes foetida. Total phenolic content (TPC) and ferric reducing antioxidant power (FRAP) assay were carried out for the microwave-assisted extract (MAE) of N. foetida using methanol as solvent and the conditions for extraction were optimised by response surface methodology (RSM). The effects of operating variables such as extraction time, temperature and ratio of sample to solvent were studied using central composite design (CCD). A mathematical model with a high determination coefficient (R2) for TPC (0.991) and FRAP (0.995) was obtained. The optimal conditions of extraction for TPC were 48.6 ºC, 23.15 min and 2.04:30 (g/mL) and for FRAP 52.31ºC, 12.32 min and 1.67: 30 (g/mL). Under these conditions, the experimental yields of TPC and FRAP were 2.426 mg gallic acid equivalents (GAE)/g dry powder and 14.985mg of FeSO4·7H2O/g of dry powder, respectively. Ag NPs were characterised using UV–Vis spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The synthesised Ag NPs have also shown potent activity against the human pathogenic Staphylococcus aureus. © 2016 Informa UK Limited, trading as Taylor & Francis Group.Item Biosynthesis of copper nanoparticles using copper-resistant Bacillus cereus, a soil isolate(Elsevier Ltd, 2016) Tiwari, M.; Jain, P.; Raghu Chandrashekar, R.; Narayanan, K.; Bhat, K.U.; Udupa, N.; Rao, J.V.Microorganisms are useful systems for the production of biocompatible metal nanoparticles. Copper, an essential element of life, has good therapeutic potential. However, copper lacks suitable form for effective in vivo delivery, which has diminished its applicability. In this study, we produced biosynthesized copper nanoparticles (BCuNps) using a copper-resistant bacterial isolate from copper mine. The organism was able to tolerate >10 mM of copper and when analysed by 16S rRNA technique, showed 100% similarity with Bacillus cereus. BCuNps, produced by this microorganism, in cell-free filtrate, were characterized for surface plasmon resonance (SPR), particle's characteristics, spectroscopic properties and morphology. SPR peaks for BCuNps were recorded between 570–620 and 350–370 nm. BCuNps characteristics, namely particle size distribution, polydispersity index and zeta potential were found to be 11–33 nm, 0.433 and (?) 19.6 mV, respectively. Scanning electron microscope (SEM), transmission electron microscope (TEM) and atomic force microscope (AFM) analyses confirmed the uniform morphology; X-ray diffraction (XRD) spectrum revealed the crystalline nature; and Fourier transform infrared (FTIR) spectrum disclosed the presence of protein with BCuNps. A comparative evaluation of BCuNps with copper sulphate to determine their antimicrobial and cell toxicity levels was undertaken. BCuNps showed better antimicrobial effect and found to be safer against normal cell lines, such as HaCat, Vero and hFOB, than the copper sulphate control. © 2016 Elsevier Ltd