Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
5 results
Search Results
Item Production of novel cell-associated tannase from newly isolated Serratia ficaria DTC(2010) Belur, P.D.; Gopal, M.; Nirmala, K.R.; Nainegali, N.Five strains of tannic acid degrading bacteria were isolated and identified by phenotypic characterization. All the five isolates showed cell-associated activity, whereas only three showed extracellular activity. Serratia ficaria DTC, showing the highest cell-associated activity (0.29 U/l), was selected for further shake-flask studies. Tannase synthesis was growth associated and reached the peak in the late stationary phase of growth. Organic nitrogen sources enhanced the tannase production. Peak tannase production of 0.56 U/l was recorded in the medium having the initial pH of 6. The pH and temperature optima of the enzyme were found to be 8.9 and 35°C, respectively. This is the first report of cell-associated activity in the case of bacterial tannase. Cell-associated tannase of Serratia ficaria DTC could be industrially important from the perspective of its activity at broad temperature and pH ranges, and its unusually high activity at pH 8.9. © The Korean Society for Microbiology and Biotechnology.Item Optimization of culture medium for novel cell-associated tannase production from bacillus massiliensis using response surface methodology(2012) Belur, P.D.; Goud, R.; Goudar, D.C.Naturally immobilized tannase (tannin acyl hydrolase, E.C. 3.1.1.20) has many advantages, as it avoids the expensive and laborious operation of isolation, purification, and immobilization, plus it is highly stable in adverse pH and temperature. However, in the case of cell-associated enzymes, since the enzyme is associated with the biomass, separation of the pure biomass is necessary. However, tannic acid, a known inducer of tannase, forms insoluble complexes with media proteins, making it difficult to separate pure biomass. Therefore, this study optimizes the production of cell-associated tannase using a "protein-tannin complex" free media. An exploratory study was first conducted in shake-flasks to select the inducer, carbon source, and nitrogen sources. As a result it was found that gallic acid induces tannase synthesis, a tryptose broth gives higher biomass, and lactose supplementation is beneficial. The medium was then optimized using response surface methodology based on the full factorial central composite design in a 3 l bioreactor. A 2 3 factorial design augmented by 7 axial points (? = 1.682) and 2 replicates at the center point was implemented in 17 experiments. A mathematical model was also developed to show the effect of each medium component and their interactions on the production of cell-associated tannase. The validity of the proposed model was verified, and the optimized medium was shown to produce maximum cell-associated tannase activity of 9.65 U/l, which is 93.8% higher than the activity in the basal medium, after 12 h at pH 5.0, 30°C. The optimum medium consists of 38 g/l lactose, 50 g/l tryptose, and 2.8 g/l gallic acid. © The Korean Society for Microbiology and Biotexhnology.Item Production of propyl gallate in nonaqueous medium using cell-associated tannase of Bacillus massiliensis: Effect of various parameters and statistical optimization(2013) Aithal, M.; Belur, P.D.Enzymatic synthesis of propyl gallate in an organic solvent was studied using cell-associated tannase (E.C. 3.1.1.20) of Bacillus massiliensis. Lyophilized biomass showing tannase activity was used as a biocatalyst. The influence of buffer pH and strength, water activity, temperature, biocatalyst loading, gallic acid concentration, and 1-propanol concentration was studied by the one-factor-at-a-time method. Subsequently, response surface methodology was applied based on a central composite design to determine the effects of three independent variables (biocatalyst loading, gallic acid concentration, and 1-propanol concentration) and their mutual interactions. A total of 20 experiments were conducted, and a statistical model was developed, which predicted the maximum propyl gallate yield of 20.28 ?g/mL in the reaction mixture comprising 40.4 mg biocatalyst, 0.4 mM gallic acid, and 6.52 % (v/v) 1-propanol in 9.5 mL benzene at 30°C. The subsequent verification experiments established the validity of the model. Under optimal conditions, 25% conversion of gallic acid to propyl gallate was achieved on a molar basis. The absence of the need for enzyme purification and subsequent immobilization steps and good conversion efficiency makes this enzyme system an interesting one. Reports on the applications of bacterial whole cell systems for synthetic reactions in organic solvents are scarce, and perhaps this is the first report on bacterial cell-associated tannase-mediated esterification in a nonaqueous medium. © 2013 International Union of Biochemistry and Molecular Biology, Inc.Item Production of oxalate oxidase from endophytic Ochrobactrum intermedium CL6(Journal of Pure and Applied Microbiology micro_drkhan@yahoo.com 54, Near Post Office, Thana Street, Shahjahanabad Bhopal 462 001, 2018) Kumar, K.; Belur, P.D.Four oxalate degrading endophytic bacteria were isolated from oxalate rich Colocasia esculenta tubers. Based upon the oxalate oxidase (EC 1.2.3.4) activity produced in nutrient medium, one bacterium was selected and identified as Ochrobactrum intermedium by 16S rDNA sequencing. Studies on effect of nutritional and non-nutritional parameters showed that oxalate oxidase production is inducible, requires Manganese ions in the medium, and very low fill-up volume is beneficial. Shake flask fermentation carried out with medium comprising Sucrose, Ammonium chloride, Sodium oxalate along with basal salts gave 0.5 UmL-1 oxalate oxidase activity and 0.454 Umg-1specific activity after 65h of fermentation. © 2018 The Author(s).Item L-asparaginase production using solid-state fermentation by an endophytic talaromyces pinophilus isolated from rhizomes of curcuma amada(Journal of Pure and Applied Microbiology micro_drkhan@yahoo.com 54, Near Post Office, Thana Street, Shahjahanabad Bhopal 462 001, 2020) Krishnapura, P.R.; Belur, P.D.In recent times, exploration of endophytes for L-asparaginase production is gradually gaining momentum. This work deals with studies on the production of L-asparaginase from Talaromyces pinophilus, an endophytic fungus isolated from the rhizomes of Curcuma amada. L-asparaginase production was carried out by Submerged Fermentation (SmF) followed by Solid-state Fermentation (SSF). A liquid medium was designed and optimized using Plackett-Burman Design and Response Surface Methodology (RSM), under SmF. Additionally, optimal concentrations of various metal salts were incorporated in the optimized liquid medium, by one-factor-at-a-time experiments. To further enhance L-asparaginase production, SSF was carried out using Polyurethane Foam (PUF) as inert support impregnated with the optimized liquid medium. Effects of PUF cube volume, mass of PUF, moisture content, initial medium pH, and incubation temperature on the enzyme production in SSF were optimized by one-factor-at-a-time approach.L-asparaginase production enhanced from 80.8 U/mL in the unoptimized medium to 94.4 U/mL in the optimized medium under SmF. Enzyme production further increased to 120.3 U/mL under SSF by using PUF soaked in the optimized liquid medium. This study highlights the benefits of carrying out SSF with PUF, using the same liquid medium optimized for SmF - a novel approach to enhance the enzyme yield (in our case an increase of about 27% was observed). To the best of our knowledge, this is the first report on the production of L-asparaginase by both SmF and SSF, from an endophyte Talaromyces pinophilus isolated from the rhizomes of Curcuma amada. © The Author(s) 2020. Open Access. This article is distributed under the terms of the Creative Commons Attribution 4.0 International License which permits unrestricted use, sharing, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.