Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
3 results
Search Results
Item Assessment of Cohesive Parameters Using High Dimensional Model Representation for Mixed Mode Cohesive Zone Model(Elsevier Ltd, 2019) Rao, B.; Balu, A.S.Simulation of the mechanical behavior of bonded joints using a cohesive zone model (CZM) is the most common technique to characterize the delamination process. It is usually dependent on the calculation of cohesive parameters of the traction-separation law, and the parameters are iteratively obtained with the help of simulation and experimental results. The non-availability of standard methods to obtain the parameters necessitates the iterative adjustments of simulation results to the experimental results. However, the calculations based on all individuals for the simulation are not effective as it demands high computational effort. To overcome this issue, this paper proposes a computationally efficient method using high dimensional model representation (HDMR). The cohesive parameters are determined by adopting an efficient sampling scheme within the limits of the parameters. Single leg bending (SLB) joint is tested under the influence of dominant conditions such as mode-I and mode-II to determine the equivalent parameters. The errors resulted from the comparison between the simulation, and experimental values are minimized in order to determine the optimal values. The mixed mode (MM) CZM is then established by pure mode cohesive parameters, and the same is implemented to the SLB joint under various mode mixities for analyzing the fracture process. Comparison between the numerical analysis and the experimental study proves that the proposed HDMR based approach estimates the failure mechanism exactly. © 2019 Institution of Structural EngineersItem Modeling of delamination in fiber-reinforced composite using high-dimensional model representation-based cohesive zone model(Springer Verlag service@springer.de, 2019) Rao, B.; Balu, A.S.Prediction of delamination failure is challenging when the researchers try to achieve the task without overburdening the available computational resources. One of the most powerful computational models to predict the crack initiation and propagation is cohesive zone model (CZM), which has become prominent in the crack propagation studies. This paper proposes a novel CZM using high-dimensional model representation (HDMR) to capture the steady-state energy release rate (ERR) of a double-cantilever beam (DCB) under mode I loading. The finite element models are created using HDMR-based load and crack length response functions. Initially, the model is developed for 51-mm crack size DCB specimens, and the developed HDMR-based CZM is then used to predict the ERR variations of 76.2-mm crack size DCB model. Comparisons have been made between the available unidirectional composite (IM7/977-3) experimental data and the numerical results obtained from the 51-mm and 76.2-mm initial crack size DCB specimens. In order to demonstrate the efficiency of the proposed model, the results of the second-order nonlinear regression model using RSM are used for the comparison study. The results show that the proposed method is computationally efficient in capturing the delamination strength. © 2019, The Brazilian Society of Mechanical Sciences and Engineering.Item Fracture mechanics-based meshless method for crack propagation in concrete structures(Elsevier Ltd, 2025) Paul, K.; Balu, A.S.; BabuNarayan, K.S.Concrete is one of the most versatile construction materials, characterized by its high compressive strength and durability. It exhibits complex fracture behaviours in the non-linear region of the fracture process zone (FPZ) near crack tip, where micro-cracking, crack coalescence, and eventual macro-crack propagation occurs. Accurately predicting crack initiation and propagation in concrete structures is essential for ensuring their safety and performance. Traditional methods like finite element analysis (FEM) face challenges in capturing crack propagation due to the need for mesh refinement, which can be computationally expensive. This study aims to address this limitation by introducing the Element-Free Galerkin (EFG) method, which offers a more efficient approach for modelling crack behaviour in concrete beams. The maximum stress theory was used as the fracture criterion and the cohesive zone model (CZM) with a bilinear softening curve is employed to simulate the FPZ. Numerical examples of simply supported beam and cantilever beams with varying pre-notch positions and loadings were analysed. The results show that under axial and point loading, the stress intensity factor increases with crack length until unstable crack growth, leading to failure. The EFG method is found to be more accurate than FEM, particularly in regions with higher deformations, with a 13 % variation due to remeshing in FEM. Under point loading, EFG predicted deformation patterns with a 6 % variation in maximum deflection. This study demonstrates that the EFG-based model effectively predicts catastrophic failures, offering a computationally efficient solution for real-world concrete structures with pre-existing cracks or defects. © 2025 Institution of Structural Engineers