Journal Articles
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/19884
Browse
23 results
Search Results
Item Performance enhancement of RC frames using welded wire fabrics - An experimental investigation(2010) Prashanth, M.H.; Chinnagiri Gowda, H.C.; Babu Narayan, K.S.; Ramana, K.V.The paper presents the performance enhancement of RC frames using welded wire fabrics to appraise beneficial effects of welded wire fabrics as lateral reinforcement in Reinforced Concrete elements. The RC frames subjected to lateral loading have been simulated to rhombus frame with vertical loading. The experimental investigation has been done on rhombus frame with vertical loading. Experimental program involved details of test specimens, test set-up and instrumentation. Comparison of conventional bare frames has been done for frame with welded wire fabrics as lateral reinforcement at discrete zone and frame with welded wire fabrics as lateral reinforcement throughout the length for the same volume fraction. Results of Experimental investigation have been reported from which the discussions and conclusions had been drawn. © 2010 Cafet-Innova Technical Society.Item Profiled sheets - the optimum vs the oft used(Techno-Press, 2010) Babu Narayan, K.S.Profiled sheets are used extensively in roofing, cladding, sheet piling and containments. Profile development is increasingly rapidly owing to advancement in materials and construction technology. The resistance to longitudinal bending is proportional to the depth and thickness and depends greatly on the profile itself. The strength of the profiled sheet in longitudinal bending is proportional to the depth of corrugation, thickness and on the profile itself. More often than not profiles are repetitive and most popular being of the sine wave form. Hence it may be assumed that if a quarter of the best form is determined, the most optimum profile is known. It is calculated that the strength/unit length of the most widely used sine wave form is in agreement with the best profile suggested by the calculus of variations.Item Studies on concrete cylinders subjected to elevated temperatures(2010) Babu Narayan, K.S.; Anil Kumar, G.; Chandrakala, C.; Shashikumar, H.M.; Venkataramana, K.; Yaragal, S.C.; Chinnagiri Gowda, H.C.; Reddy, G.R.; Sharma, A.Concrete is a poor conductor of heat, but can suffer considerable damage when exposed to fire. Concrete in structures is likely to be exposed to high temperatures during fire. The relative properties of concrete after such an exposure are of great importance in terms of the serviceability of buildings. Unraveling the heating history of concrete is important to forensic research or to determine whether a fire exposed concrete structures and its components are still structurally sound or not. Assessment of fire damage concrete structures usually starts with visual observation of color change, cracking and spalling. On heating, a change in color from normal to pink is often observed and this is useful since it coincides with the onset of significant loss of concrete strength. This work reports the characteristics of concrete at elevated temperatures. Popular normal strength grades (M20, M25, M30, M35, M40 and M45) produced by Ready Mix Concrete (RMC) India, Mangalore have been used in production of test specimens (150 mm diameter and 300mm height cylinders) to obtain more meaningful and realistic data. In the preliminary phase 150 mm diameter and 300mm height cylinders were cast, cured and tested by destructive method for gathering data on strength characteristics. Later these test samples were subjected to elevated temperatures ranging from 100°C to 800°C, in steps of 100°C with a retention period of 2 hours. After exposure, weight losses were determined and then again destructive tests were conducted to estimate the residual split tensile strength. Test results indicated that weight and strength significantly reduces with an increase in temperature. © 2010 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.Item Strength retention characteristics of concrete cubes subjected to elevated temperatures(2010) Yaragal, S.C.; Clarke, K.S.; Mahesh Babu, K.; Ashokumar, S.; Venkataramana, K.; Babu Narayan, K.S.; Chinnagiri Gowda, H.C.; Reddy, G.R.; Sharma, A.Concrete in structures is likely to be exposed to high temperatures during fire. The relative properties of concrete after such an exposure are of great importance in terms of the serviceability of buildings. The probability of its exposure to elevated temperatures is high due to natural hazards, accidents and sabotages. Therefore, the performance of concrete during and after exposure to elevated temperature is a subject of great interest to the designer. Physical changes like cracking, colour change, spalling and chemical changes like decomposition of Ca(OH)2 and the C-S-H gel take place when subjected to elevated temperatures. This work reports the characteristics of concrete at elevated temperatures. Popular normal strength grades (M20, M25, M30, M35, M40 and M45) produced by Ready Mix Concrete (RMC) India, Mangalore have been used in production of test specimens (150 mm cubes) to obtain more meaningful and realistic data. In the preliminary phase 150 mm cubes were cast, cured and tested by destructive method for gathering data on strength characteristics. Later these test samples were subjected to elevated temperatures ranging from 100°C to 800°C, in steps of 100°C with a retention period of 2 hours. After exposure, weight losses were determined and then again destructive tests were conducted to estimate the residual compressive strength. Test results indicated that weight and strength significantly reduces with an increase in temperature. © 2010 CAFET-INNOVA TECHNICAL SOCIETY.Item Studies on normal strength concrete cubes subjected to elevated temperatures(2010) Yaragal, S.C.; Babu Narayan, K.S.; Venkataramana, K.; Kulkarni, K.S.; Gowda, H.C.C.; Reddy, G.R.; Sharma, A.Concrete in structures is likely to be exposed to high temperatures during fire. The probability of its exposure to elevated temperatures is high due to natural hazards, accidents and sabotages. Therefore, the performance of concrete during and after exposure to elevated temperature is a subject of great importance and interest to the designer. Popular normal strength grades of concrete produced by Ready Mix Concrete (RMC) India, Mangalore have been used in production of test specimens (150 mm cubes), cured and tested by destructive method for gathering data on strength characteristics. Later, these test samples were subjected to elevated temperatures ranging from 100 C to 800 C, in steps of 100 C with a retention period of 2 hours. After exposure, weight losses and the residual compressive strength retention characteristics are studied. Test results indicated that weight and strength significantly reduces with an increase in temperature. Residual compressive strength prediction equations are proposed for normal strength concretes subjected to elevated temperatures.Item Slim – Gal for shape optimization of structures(CAFET INNOVA Technical Society 1-2-18/103, Mohini Mansion, Gagan Mahal Road, Domalguda, Hyderabad 500029, 2011) Babu Narayan, K.S.; Devraj, M.; Arun Prabha, K.S.Structural Optimization has been & continues to be an active area of research offering scope and need to handle a wide & varied range of problems. Genetic Algorithms (GA) recently have been, with great success employed to solve structural engineering problems either in conjunction with traditional methods or as alternatives. Sizing, shape and topology design of trusses is an interesting exercise that has attracted the attention of researchers. However design problems have not been kept free of conceptual designs, defeating the possibility of evolution of more efficient & innovative designs, the reason being the complexity of the problem on hand. This paper presents GA based methodology of arriving at the best configuration & member sizing employing simultaneous mode of failure approach for problem formulation of the multi-objective type to yield a structure that satisfies functional & structural requirements optimally. © 2011 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.Item Performance appraisal of RC beams using welded wire fabrics as lateral reinforcement in seismic zones(CAFET INNOVA Technical Society 1-2-18/103, Mohini Mansion, Gagan Mahal Road, Domalguda, Hyderabad 500029, 2011) Gowda, H.C.C.; Babu Narayan, K.S.; Venkataramana, K.Ductility is the key to design earthquake resistant structures. More rigid the structure or the element, more it attracts inertia forces. Structures and elements of infinite rigidity are out of question. Codes of practice also advocate design philosophies wherein effects of small earthquakes are to be absorbed with little or no damage, medium with damage to such extents that rehabilitation is possible and large earthquake effects to be catered without collapse. To absorb the tremendous energies that are input to structures and elements unless ductility is ensured, performance levels proposed by codes and standard practices cannot be attained. Lateral ties hold longitudinal reinforcement of R.C.elements in place and also confine the concrete. The basis of the present work is the usage of welded wire fabrics as lateral reinforcement in RC beams. A series of beams were tested with lateral ties and welded wire fabric at discrete locations and welded wire fabric alone throughout the beam with different mesh opening sizes. This paper presents the encouraging results with marginal increase in strength and considerable improvement in ductility in addition to reduced crack widths as observed for specimens having welded wire fabric with smaller mesh openings as lateral reinforcement by confining concrete. © 2011 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.Item Characteristics of normal strength concrete with and without chemical admixtures at elevated temperatures(CAFET INNOVA Technical Society 1-2-18/103, Mohini Mansion, Gagan Mahal Road, Domalguda, Hyderabad 500029, 2011) Yaragal, S.C.; Warad, S.A.; Babu Narayan, K.S.; Venkataramana, K.Fire is one of the most destructive powers to which a building structure can be subjected. Behavior of concrete when exposed to fire in cases like nuclear plants, cooling towers or any accidental fire in industrial buildings, is a serious concern, on the strength retention property of concrete. This work reports strength retention studies on compressive and split tensile strength of normal concrete with and without the chemical admixture (Reobuild 918, BASF make) at elevated temperatures. Concrete cubes of size 100 mm have been cast as per prior mix design for M30 grade of concrete, 28 days water cured and tested by destructive method for strength before exposure. Later these specimen were subjected to elevated temperatures of 200°C, 400°C, 600°C and 800°C with a retention period of 2 hours and were allowed cool within the furnace to reach ambient temperature. Later their appearance, colour and cracks were observed and also weight losses were determined. Further, destructive tests were conducted to estimate residual compressive and residual split tensile strengths and prediction equations are proposed to ascertain splitting tensile strengths from compressive strengths. © 2011 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.Item Effect of recuring on compressive strength of thermally deteriorated concrete cubes(2011) Prasanth, S.; Yaragal, S.C.; Babu Narayan, K.S.Concrete is found to undergo degradation when subjected to elevated temperatures during an event such as fire and lose substantial amount of its strength. The loss of strength in concrete is mainly attributed to decomposition of C-S-H and release of chemically bound water, which begins when the exposure temperature exceeds 500°C. When thermally deteriorated concrete is supplied with water there is a substantive gain in strength as a consequence of rehydration of cement that is initiated. This paper presents results of an experimental program carried out to investigate the effect of recuring on strength gain of normal strength concrete specimens subjected to elevated temperatures from 500°C to 800°C, which were subjected to retention time of two hours at the designated temperatures. © 2011 CAFET-INNOVA TECHNICAL SOCIETY. All rights reserved.Item Performance enhancement of preloaded RC beams using CFRP sheets(CAFET INNOVA Technical Society cafetinnova@gmail.com 1-2-18/103, Mohini Mansion, Gagan Mahal Road, Domalguda, Hyderabad 500029, 2012) Prashanth, M.H.; Suraj, K.; Babu Narayan, K.S.; Ravikumar, C.M.Retrofitting concrete structures with Carbon Fiber Reinforced Polymer (CFRP) has grown widely in most parts of the world today. The main reason for the wide spread application of FRP is that it is possible to obtain an effective strengthening with a relative small work effort. Furthermore it is possible to carry out strengthening work without changing the current appearance or dimension of the structure. To strengthen and increase the ductility of the structure, CFRP has become an innovative material in to the field of structural strengthening and rehabilitation. In the present experimental investigation, RC beams were preloaded up to 0 to 50% of the ultimate capacity and were applied with CFRP sheets at the soffit of the beams were compared with control beam. The Load vs deflection, and crack mechanism are studied. The use of CFRP sheets in the soffit of the beam has resulted in enhanced strength and ductility. © 2012 CAFET-INNOVA TECHNICAL SOCIETY.
- «
- 1 (current)
- 2
- 3
- »