5. Miscellaneous Publications
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/13843
Browse
16 results
Search Results
Item International Journal of Ecology and Development: Editorial(2009) Hegde A.V.[No abstract available]Item Heat transfer during quenching and assessment of quench severity-A review(2009) Narayan Prabhu K.; Fernandes P.In the heat treatment of steel, quenching is done to prevent ferrite or pearlite formation and allows formation of bainite and martensite. For a particular grade of steel, the effectiveness of quenching depends on the cooling characteristics of the quenching medium. The cooling rate is not a constant throughout the quenching process; instead it varies depending upon the various stages that occur during the quenching process. Knowledge of heat transfer during various stages of quenching and kinetics of wetting of the quench medium is fundamental to the understanding of the relationship between material, quench medium, microstructure, and properties. In this paper the characteristics of various quench media, the effect of process parameters on quenching, mechanisms of thermal transport, methods of assessing severity of quenching, and techniques of estimation of heat transfer coefficients are reviewed. An attempt is also made to highlight the importance of wetting kinetics of liquid media on quenching. Copyright © 2009 by ASTM International.Item Erratum: Special solutions of a general class of iterative functional equations (Aequationes Mathematicae (2006) 72 (269-287) DOI: 10.1007/s00010-006-2839-5)(2008) Murugan, V.; Subrahmanyam P.V.[No abstract available]Item Item Chemical amplification method for the determination of atmospheric sulphur dioxide(1997) Pandurangappa M.; Balasubramanian N.A sensitive spectrophotometric method is described for the determination of trace levels of sulphur dioxide in ambient air after fixing the gas in triethanolamine (TEA) or triethanolaminemannitol absorbing solutions. The method is based on the reaction of sulphur dioxide with iodine to form iodide and after the extraction of unreacted iodine, the iodide was oxidized to iodate by bromine. The generated iodate is utilized to oxidize hydroxylamine to nitrite which produces an azo dye in the presence of p-nitroaniline and N-(l-naphthyl)ethylenediamine dihydrochloride (NEDA) in acid medium with maximum absorption at 545 nm. The system obeys Beer's law over the concentration range 0-5 μg of sulphur dioxide in a final volume of 25 ml. The relative standard deviation is 2.5% at 4 μg of sulphur dioxide (n = 10). The interference of other gaseous species were suitably overcome by the proper reaction conditions. The developed method was applied to determine low levels of sulphur dioxide generated using permeation devices and ambient levels of sulphur dioxide in the vicinity of a sulphuric acid plant.Item Assessment of heavy earth-moving machinery noise vis-à-vis routine maintenance(2006) Vardhan, H.; Karmakar, N.C.; Rao Y.V.Exposure to noise from various types of equipment/machinery has been identified as a critical health hazard for personnel working in the Indian mining industry. Heavy Earth Moving Machinery (HEMM) used in mines has been identified as a major source of noise, and several earlier investigators have proposed various types of retrofit measures on these machines to reduce noise. The present work was taken up with the objective of evaluating the noise generation characteristics of HEMM as influenced by periodic maintenance. Detailed noise measurements were carried out in a large open pit coal mine located in India. The effect of maintenance on noise production was assessed for ten dumpers and three dozers by measuring the A-weighted one-third-octave band sound pressure levels after the machines had been subjected to maintenance at the end of 300 hours, 500 hours, 750 hours and 1000 hours of use. Measurements were also carried out to assess the effect of maintaining specific HEMM systems noise characteristics at 1000 hours. Assessment of sound pressure levels at each periodic maintenance revealed major sound level reductions with 1000 hours maintenance. The data also identified the major noise generating systems in HEMM as air systems, exhaust systems, cooling systems and fuel systems. © 2006 Institute of Noise Control Engineering.Item Asbestos mining - campaign against its utilisation in western world(1989) Venkat Reddy D.[No abstract available]Item Transmission and storage of medical images with patient information(2003) Acharya U. R.; Subbanna Bhat S.; Kumar S.; Min L.C.Digital watermarking is a technique of hiding specific identification data for copyright authentication. This technique is adapted here for interleaving patient information with medical images, to reduce storage and transmission overheads. The text data is encrypted before interleaving with images to ensure greater security. The graphical signals are interleaved with the image. Two types of error control-coding techniques are proposed to enhance reliability of transmission and storage of medical images interleaved with patient information. Transmission and storage scenarios are simulated with and without error control coding and a qualitative as well as quantitative interpretation of the reliability enhancement resulting from the use of various commonly used error control codes such as repetitive, and (7,4) Hamming code is provided. © 2003 Elsevier Science Ltd. All rights reserved.Item Technical aspects of biodiesel and its oxidation stability(2009) Kapilan N.; Ashok Babu T.P.; Reddy R.P.Biodiesel is a clean burning alternative renewable fuel made from natural renewable sources. It is defined as mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, which conform to ASTM specifications for use in diesel engines. Biodiesel present a very promising alternative fuel to diesel oil and properties of this oil offer the advantage of immediate substitution in existing diesel engines with little or no modifications at all. But one of the major technical problems associated with the biodiesel is its susceptibility to oxidation, which can cause the fuel to become acidic and to form insoluble gums and sediments that can plug fuel filters. This is due to the unsaturated fatty acid chains and the presence of the double bond in the molecule, which produce a high level of reactivity with the oxygen, especially when it placed in contact with air. The oxidation of fatty acid chains is a complex process that proceeds by a variety of mechanisms. The various other factors influence the oxidation process of biodiesel includes light, temperature, extraneous materials, peroxides, size of the surface area between biodiesel and air. One of the methods of improving biodiesel oxidative stability includes the deliberate addition of antioxidants or modification of the fatty ester profile. This article discusses the technical aspects of biodiesel and its oxidation stability.Item Welcome message(2006) Patniak L.M.; Trivedi K.S.; Sivakumar G.; Ray I.; Misra S.; Venugopal K.R.; Sekaran K.C.[No abstract available]