5. Miscellaneous Publications
Permanent URI for this collectionhttps://idr.nitk.ac.in/handle/123456789/13843
Browse
18 results
Search Results
Item International Journal of Ecology and Development: Editorial(2009) Hegde A.V.[No abstract available]Item Heat transfer during quenching and assessment of quench severity-A review(2009) Narayan Prabhu K.; Fernandes P.In the heat treatment of steel, quenching is done to prevent ferrite or pearlite formation and allows formation of bainite and martensite. For a particular grade of steel, the effectiveness of quenching depends on the cooling characteristics of the quenching medium. The cooling rate is not a constant throughout the quenching process; instead it varies depending upon the various stages that occur during the quenching process. Knowledge of heat transfer during various stages of quenching and kinetics of wetting of the quench medium is fundamental to the understanding of the relationship between material, quench medium, microstructure, and properties. In this paper the characteristics of various quench media, the effect of process parameters on quenching, mechanisms of thermal transport, methods of assessing severity of quenching, and techniques of estimation of heat transfer coefficients are reviewed. An attempt is also made to highlight the importance of wetting kinetics of liquid media on quenching. Copyright © 2009 by ASTM International.Item Erratum: Special solutions of a general class of iterative functional equations (Aequationes Mathematicae (2006) 72 (269-287) DOI: 10.1007/s00010-006-2839-5)(2008) Murugan, V.; Subrahmanyam P.V.[No abstract available]Item Item Damping behaviour of cast and sintered aluminium(2009) Umashankar K.S.; Abhinav A.; Gangadharan, K.V.; Vijay D.Estimating damping in structures made of different materials and processes still remains as one of the biggest challenges. Aluminium is one such pioneer material which is being used extensively in aerospace, automotive and the manufacturing industry. Aluminium components are mainly manufactured by traditional casting and powder metallurgy process. The main objective of this paper is to estimate the damping ratio of aluminium manufactured through powder metallurgy (P/M) process and compare it with the commercially available Cast aluminium. Aluminium powder is compacted, sintered and then it is extruded to the required geometry. Cantilever beams of required size and shape are prepared for experimental purpose and the damping ratio is investigated. Damping ratio is determined by sweep sine test using half power bandwidth method. Free vibration tests also confirmed the damping ratios obtained by sweep sine method. It is observed that damping ratio is higher for sintered aluminium than cast aluminium which may be attributed to increased porosity. © 2006-2009 Asian Research Publishing Network (ARPN). All rights reserved.Item Casting/mould interfacial heat transfer during solidification in graphite, steel and graphite lined steel moulds(2003) Prabhu K.N.; Mounesh H.; Suresh K.M.; Ashish A.A.Heat flow between the casting and the mould during solidification of three commercially pure metals, in graphite, steel and graphite lined steel moulds, was assessed using an inverse modelling technique. The analysis yielded the interfacial heat flux (q), heat transfer coefficient (h) and the surface temperatures of the casting and the mould during solidification of the casting. The peak heat flux was incorporated as a dimensionless number and modeled as a function of the thermal diffusivities of the casting and the mould materials. Heat flux transients were normalised with respect to the peak heat flux and modeled as a function of time. The heat flux model proposed was used to estimate the heat flux transients during solidification in graphite lined copper composite moulds.Item Assessment of heavy earth-moving machinery noise vis-à-vis routine maintenance(2006) Vardhan, H.; Karmakar, N.C.; Rao Y.V.Exposure to noise from various types of equipment/machinery has been identified as a critical health hazard for personnel working in the Indian mining industry. Heavy Earth Moving Machinery (HEMM) used in mines has been identified as a major source of noise, and several earlier investigators have proposed various types of retrofit measures on these machines to reduce noise. The present work was taken up with the objective of evaluating the noise generation characteristics of HEMM as influenced by periodic maintenance. Detailed noise measurements were carried out in a large open pit coal mine located in India. The effect of maintenance on noise production was assessed for ten dumpers and three dozers by measuring the A-weighted one-third-octave band sound pressure levels after the machines had been subjected to maintenance at the end of 300 hours, 500 hours, 750 hours and 1000 hours of use. Measurements were also carried out to assess the effect of maintaining specific HEMM systems noise characteristics at 1000 hours. Assessment of sound pressure levels at each periodic maintenance revealed major sound level reductions with 1000 hours maintenance. The data also identified the major noise generating systems in HEMM as air systems, exhaust systems, cooling systems and fuel systems. © 2006 Institute of Noise Control Engineering.Item Transmission and storage of medical images with patient information(2003) Acharya U. R.; Subbanna Bhat S.; Kumar S.; Min L.C.Digital watermarking is a technique of hiding specific identification data for copyright authentication. This technique is adapted here for interleaving patient information with medical images, to reduce storage and transmission overheads. The text data is encrypted before interleaving with images to ensure greater security. The graphical signals are interleaved with the image. Two types of error control-coding techniques are proposed to enhance reliability of transmission and storage of medical images interleaved with patient information. Transmission and storage scenarios are simulated with and without error control coding and a qualitative as well as quantitative interpretation of the reliability enhancement resulting from the use of various commonly used error control codes such as repetitive, and (7,4) Hamming code is provided. © 2003 Elsevier Science Ltd. All rights reserved.Item Technical aspects of biodiesel and its oxidation stability(2009) Kapilan N.; Ashok Babu T.P.; Reddy R.P.Biodiesel is a clean burning alternative renewable fuel made from natural renewable sources. It is defined as mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, which conform to ASTM specifications for use in diesel engines. Biodiesel present a very promising alternative fuel to diesel oil and properties of this oil offer the advantage of immediate substitution in existing diesel engines with little or no modifications at all. But one of the major technical problems associated with the biodiesel is its susceptibility to oxidation, which can cause the fuel to become acidic and to form insoluble gums and sediments that can plug fuel filters. This is due to the unsaturated fatty acid chains and the presence of the double bond in the molecule, which produce a high level of reactivity with the oxygen, especially when it placed in contact with air. The oxidation of fatty acid chains is a complex process that proceeds by a variety of mechanisms. The various other factors influence the oxidation process of biodiesel includes light, temperature, extraneous materials, peroxides, size of the surface area between biodiesel and air. One of the methods of improving biodiesel oxidative stability includes the deliberate addition of antioxidants or modification of the fatty ester profile. This article discusses the technical aspects of biodiesel and its oxidation stability.Item Welcome message(2006) Patniak L.M.; Trivedi K.S.; Sivakumar G.; Ray I.; Misra S.; Venugopal K.R.; Sekaran K.C.[No abstract available]