Browsing by Author "Tiwari, M."

Filter results by typing the first few letters
Now showing 1 - 3 of 3
  • No Thumbnail Available
    Item
    Assessment on the effectiveness of chemical admixture in processed laterite and copper slag based geopolymer mortar
    (Elsevier Ltd, 2025) Clement, D.; C, R.; Singh, S.K.; Tiwari, M.
    Geopolymer-based cementitious materials known for their robust durability and lower environmental impact make them an ideal choice for sustainable construction. The main focus of this study is to understand the influence of chemical admixtures which plays a pivotal role in improving the properties of geopolymer mortar (GM). This research integrates various chemical admixtures, including calcium chloride, sodium sulphate, sodium hexametaphosphate, and MasterGlenium SKY 8233 (SKY) which falls under the category of either accelerators, retarders, or superplasticisers. Assessments were conducted on the fresh and hardened states of flyash-based GM mixes with varying proportion of river sand (RS), laterite soil (LS) and copper slag (CS), encompassing flowability, setting times, compressive strength, durability study in aggressive environmental conditions and microstructural analyses after 56 days of ambient curing. Findings reveal that calcium chloride and sodium sulphate efficiently decrease the initial and final setting times of the geopolymer paste, highlighting their roles as accelerators, with calcium chloride showing greater efficacy than sodium sulphate. On the other hand, sodium hexametaphosphate serves as a retarder, substantially extending the initial setting time of the geopolymer paste. Introducing the modified polycarboxylic ether (PCE) based superplasticiser SKY into the mortar matrix caused the initial setting time to be extended and resulted in a slight drop in compressive strength compared to the other mixes. Durability tests confirmed the superior resistance of GM mixes to harsh environments like acid, sulphate, and marine water exposure. These findings highlight the potential for tailoring geopolymer blends to achieve desired properties under ambient curing conditions using chemical admixtures. © 2025 Elsevier Ltd
  • No Thumbnail Available
    Item
    Biosynthesis of copper nanoparticles using copper-resistant Bacillus cereus, a soil isolate
    (2016) Tiwari, M.; Jain, P.; Chandrashekhar, Hariharapura, R.; Narayanan, K.; Bhat, K., U.; Udupa, N.; Rao, J.V.
    Microorganisms are useful systems for the production of biocompatible metal nanoparticles. Copper, an essential element of life, has good therapeutic potential. However, copper lacks suitable form for effective in vivo delivery, which has diminished its applicability. In this study, we produced biosynthesized copper nanoparticles (BCuNps) using a copper-resistant bacterial isolate from copper mine. The organism was able to tolerate >10 mM of copper and when analysed by 16S rRNA technique, showed 100% similarity with Bacillus cereus. BCuNps, produced by this microorganism, in cell-free filtrate, were characterized for surface plasmon resonance (SPR), particle's characteristics, spectroscopic properties and morphology. SPR peaks for BCuNps were recorded between 570 620 and 350 370 nm. BCuNps characteristics, namely particle size distribution, polydispersity index and zeta potential were found to be 11 33 nm, 0.433 and (?) 19.6 mV, respectively. Scanning electron microscope (SEM), transmission electron microscope (TEM) and atomic force microscope (AFM) analyses confirmed the uniform morphology; X-ray diffraction (XRD) spectrum revealed the crystalline nature; and Fourier transform infrared (FTIR) spectrum disclosed the presence of protein with BCuNps. A comparative evaluation of BCuNps with copper sulphate to determine their antimicrobial and cell toxicity levels was undertaken. BCuNps showed better antimicrobial effect and found to be safer against normal cell lines, such as HaCat, Vero and hFOB, than the copper sulphate control. 2016 Elsevier Ltd
  • No Thumbnail Available
    Item
    Biosynthesis of copper nanoparticles using copper-resistant Bacillus cereus, a soil isolate
    (Elsevier Ltd, 2016) Tiwari, M.; Jain, P.; Raghu Chandrashekar, R.; Narayanan, K.; Bhat, K.U.; Udupa, N.; Rao, J.V.
    Microorganisms are useful systems for the production of biocompatible metal nanoparticles. Copper, an essential element of life, has good therapeutic potential. However, copper lacks suitable form for effective in vivo delivery, which has diminished its applicability. In this study, we produced biosynthesized copper nanoparticles (BCuNps) using a copper-resistant bacterial isolate from copper mine. The organism was able to tolerate >10 mM of copper and when analysed by 16S rRNA technique, showed 100% similarity with Bacillus cereus. BCuNps, produced by this microorganism, in cell-free filtrate, were characterized for surface plasmon resonance (SPR), particle's characteristics, spectroscopic properties and morphology. SPR peaks for BCuNps were recorded between 570–620 and 350–370 nm. BCuNps characteristics, namely particle size distribution, polydispersity index and zeta potential were found to be 11–33 nm, 0.433 and (?) 19.6 mV, respectively. Scanning electron microscope (SEM), transmission electron microscope (TEM) and atomic force microscope (AFM) analyses confirmed the uniform morphology; X-ray diffraction (XRD) spectrum revealed the crystalline nature; and Fourier transform infrared (FTIR) spectrum disclosed the presence of protein with BCuNps. A comparative evaluation of BCuNps with copper sulphate to determine their antimicrobial and cell toxicity levels was undertaken. BCuNps showed better antimicrobial effect and found to be safer against normal cell lines, such as HaCat, Vero and hFOB, than the copper sulphate control. © 2016 Elsevier Ltd