Browsing by Author "Siddhalingeshwar, I.G."

Now showing 1 - 6 of 6

Dry sliding wear of epoxy/cenosphere syntactic foams
(2015) Manakari, V.; Parande, G.; Doddamani, M.; Gaitonde, V.N.; Siddhalingeshwar, I.G.; Kishore; Shunmugasamy, V.C.; Gupta, N.
Abstract Dry sliding wear behavior of epoxy matrix syntactic foams filled with 20, 40 and 60 wt% fly ash cenosphere is reported based on response surface methodology. Empirical models are constructed and validated based on analysis of variance. Results show that syntactic foams have higher wear resistance than the matrix resin. Among the parameters studied, the applied normal load (F) had a prominent effect on wear rate, specific wear rate (ws) and coefficient of friction (?). With increasing F, the wear rate increased, whereas ws and ? decreased. With increase in filler content, the wear rate and ws decreased, while the ? increased. With increase in sliding velocity as well as sliding distance, the wear rate and ws show decreasing trends. Microscopy revealed broken cenospheres forming debris and extensive deformation marks on the wear surface. 2015 Elsevier Ltd.
Dry sliding wear of epoxy/cenosphere syntactic foams
(Elsevier Ltd, 2015) Manakari, V.; Parande, G.; Doddamani, M.; Gaitonde, V.N.; Siddhalingeshwar, I.G.; Kishore; Shunmugasamy, V.C.; Gupta, N.
Abstract Dry sliding wear behavior of epoxy matrix syntactic foams filled with 20, 40 and 60 wt% fly ash cenosphere is reported based on response surface methodology. Empirical models are constructed and validated based on analysis of variance. Results show that syntactic foams have higher wear resistance than the matrix resin. Among the parameters studied, the applied normal load (F) had a prominent effect on wear rate, specific wear rate (ws) and coefficient of friction (?). With increasing F, the wear rate increased, whereas ws and ? decreased. With increase in filler content, the wear rate and ws decreased, while the ? increased. With increase in sliding velocity as well as sliding distance, the wear rate and ws show decreasing trends. Microscopy revealed broken cenospheres forming debris and extensive deformation marks on the wear surface. © 2015 Elsevier Ltd.
Effect of mushy state rolling on age-hardening and tensile behavior of Al-4.5Cu alloy and in situ Al-4.5Cu-5TiB2 composite
(2011) Siddhalingeshwar, I.G.; Herbert, M.A.; Chakraborty, M.; Mitra, R.
The effect of mushy state rolling on aging kinetics of stir-cast Al-4.5Cu alloy and in situ Al-4.5Cu-5TiB2 composite and their tensile behavior in solution-treated (495 C) or differently aged (170 C) conditions, has been investigated. As-cast or pre-hot rolled alloy and composite samples were subjected to single or multiple mushy state roll passes to 5% thickness reduction at temperatures for 20% liquid content. Peak-aging times of mushy state rolled composite matrices have been found as ?7.5-10% of that of as-cast alloy. Such enhancement in aging kinetics is attributed to homogeneity in Cu atom distribution as well as increase in matrix dislocation density due to thermal expansion coefficient mismatch between Al and TiB2, matrix grain refinement and particle redistribution, achieved by mushy state rolling. Uniform precipitate distribution in mushy state rolled composite matrices leads to greater peak-age microhardness with higher yield and ultimate tensile strengths than those in as-cast alloy and composite. 2010 Elsevier B.V.
Effect of mushy state rolling on age-hardening and tensile behavior of Al-4.5Cu alloy and in situ Al-4.5Cu-5TiB2 composite
(Elsevier Ltd, 2011) Siddhalingeshwar, I.G.; Herbert, M.A.; Chakraborty, M.; Mitra, R.
The effect of mushy state rolling on aging kinetics of stir-cast Al-4.5Cu alloy and in situ Al-4.5Cu-5TiB2 composite and their tensile behavior in solution-treated (495°C) or differently aged (170°C) conditions, has been investigated. As-cast or pre-hot rolled alloy and composite samples were subjected to single or multiple mushy state roll passes to 5% thickness reduction at temperatures for 20% liquid content. Peak-aging times of mushy state rolled composite matrices have been found as ?7.5-10% of that of as-cast alloy. Such enhancement in aging kinetics is attributed to homogeneity in Cu atom distribution as well as increase in matrix dislocation density due to thermal expansion coefficient mismatch between Al and TiB2, matrix grain refinement and particle redistribution, achieved by mushy state rolling. Uniform precipitate distribution in mushy state rolled composite matrices leads to greater peak-age microhardness with higher yield and ultimate tensile strengths than those in as-cast alloy and composite. © 2010 Elsevier B.V.
Wear response of walnut-shell-reinforced epoxy composites
(2017) Doddamani, M.; Parande, G.; Manakari, V.; Siddhalingeshwar, I.G.; Gaitonde, V.N.; Gupta, N.
Present work utilizes agricultural by-product, walnut shell, as reinforcing filler in epoxy matrix for investigating dry sliding wear behavior using a pin-on disc wear-testing machine. Effects of sliding velocity (0.5-1.5 m/s), normal load (10-50 N), sliding distance (1000-3000 m) and filler content (10-30 wt. %) on wear rate (Wt), specific wear rate (Ws) and coefficient of friction (?) are investigated. The experiments were planned as per design of the experiments scheme and the wear characteristics were analyzed through response surface modeling (RSM) method. The lowest Wt of 1.1 mm3/km was noted for 1.5 m/s sliding velocity with 30-wt. % filler content. Sliding distance did not have a significant influence on Ws above a critical load of 40 N. The minimum ? was observed at 1-m/s sliding velocity, 40-N load, 1000-m sliding distance, and 30-wt. % filler. Lower values of Wt and ? at higher walnut-shell loadings support feasibility of using such composites in wear-prone applications. The wear mechanism was determined in the composites using extensive scanning electron microscopic observations. Copyright � 2017 by ASTM International.
Wear response of walnut-shell-reinforced epoxy composites
(ASTM International, 2017) Doddamani, M.; Parande, G.; Manakari, V.; Siddhalingeshwar, I.G.; Gaitonde, V.N.; Gupta, N.
Present work utilizes agricultural by-product, walnut shell, as reinforcing filler in epoxy matrix for investigating dry sliding wear behavior using a pin-on disc wear-testing machine. Effects of sliding velocity (0.5-1.5 m/s), normal load (10-50 N), sliding distance (1000-3000 m) and filler content (10-30 wt. %) on wear rate (Wt), specific wear rate (Ws) and coefficient of friction (?) are investigated. The experiments were planned as per design of the experiments scheme and the wear characteristics were analyzed through response surface modeling (RSM) method. The lowest Wt of 1.1 mm3/km was noted for 1.5 m/s sliding velocity with 30-wt. % filler content. Sliding distance did not have a significant influence on Ws above a critical load of 40 N. The minimum ? was observed at 1-m/s sliding velocity, 40-N load, 1000-m sliding distance, and 30-wt. % filler. Lower values of Wt and ? at higher walnut-shell loadings support feasibility of using such composites in wear-prone applications. The wear mechanism was determined in the composites using extensive scanning electron microscopic observations. © © 2017 by ASTM International.