Browsing by Author "Sharma K, M."

Now showing 1 - 3 of 3

Accurate parametrization and methodology for selection of pertinent single diode photovoltaic model with improved simulation efficiency
(Elsevier Ltd, 2018) Gudimindla, H.; Sharma K, M.
An accurate model of photovoltaic (PV) panel is indispensable for simulations studies. In general, the PV circuit parameters for simulation studies are extracted from the manufacturer's data sheet under different environmental conditions. The PV characterizing equations are nonlinear and requires a more involved computation. This paper presents a fast convergent third order Newton-type method to solve such nonlinear equations and thereby, to accurately parameterize any of the possible PV circuit models. The applicability and suitability of the proposed method are demonstrated through modeling of multi and mono-crystalline PV cells. Further an algorithm to evaluate the efficacy of the available methods and the proposed method is presented. PV characteristics of the suitable circuit model at various levels of temperature and irradiation are also examined. Finally, the effectiveness of the developed method is comprehensively assessed through comparison with the most recent and available effective techniques by considering various performance indices based on current-voltage, power-voltage curves and experimental data is carried out. © 2018 Elsevier Ltd
Exploring the Potential of Kite-Based Wind Power Generation: An Emulation-Based Approach
(Multidisciplinary Digital Publishing Institute (MDPI), 2023) Castelino, R.V.; Kumar, P.; Kashyap, Y.; Karthikeyan, A.; Sharma K, M.; Karmakar, D.; Kosmopoulos, P.
A Kite-based Airborne Wind Energy Conversion System (KAWECS) works by harnessing the kinetic energy from the wind and converting it into electric power. The study of the dynamics of KAWECS is fundamental in researching and developing a commercial-scale KAWECS. Testing an actual KAWECS in a location with suitable wind conditions is only sometimes a trusted method for conducting research. A KAWECS emulator was developed based on a Permanent Magnet Synchronous Machine (PMSM) drive coupled with a generator to mimic the kite’s behaviour in wind conditions. Using MATLAB-SIMULINK, three different power ratings of 1 kW, 10 kW, and 100 kW systems were designed with a kite surface area of 2.5 m (Formula presented.), 14 m (Formula presented.), and 60 m (Formula presented.), respectively. The reel-out speed of the tether, tether force, traction power, drum speed, and drum torque were analysed for a wind speed range of 2 m/s to 12.25 m/s. The satellite wind speed data at 10 m and 50 m above ground with field data of the kite’s figure-of-eight trajectories were used to emulate the kite’s characteristics. The results of this study will promote the use of KAWECS, which can provide reliable and seamless energy flow, enriching wind energy exploitation under various installation environments. © 2023 by the authors.
Laboratory-Scale Airborne Wind Energy Conversion Emulator Using OPAL-RT Real-Time Simulator
(Multidisciplinary Digital Publishing Institute (MDPI), 2023) Kumar, P.; Kashyap, Y.; Castelino, R.V.; Karthikeyan, A.; Sharma K, M.; Karmakar, D.; Kosmopoulos, P.
Airborne wind energy systems (AWES) are more efficient than traditional wind turbines because they can capture higher wind speeds at higher altitudes using connected kite generators. Securing a real wind turbine or a site with favorable wind conditions is not always an assured opportunity for conducting research. Hence, the Research and Development of the Laboratory Scale Airborne Wind Energy Conversion System (LAWECS) require a better understanding of airborne wind turbine dynamics and emulation. Therefore, an airborne wind turbine emulation system was designed, implemented, simulated, and experimentally tested with ground data for the real time simulation. The speed and torque of a permanent magnet synchronous motor (PMSM) connected to a kite are regulated to maximize wind energy harvesting. A field-oriented control technique is then used to control the PMSM’s torque, while a three-phase power inverter is utilized to drive the PMSM with PI controllers in a closed loop. The proposed framework was tested, and the emulated airborne wind energy conversion system results were proven experimentally for different wind speeds and generator loads. Further, the LAWECS emulator simulated a 2 kW, 20 kW, and 60 kW designed with a projected kite area of 5, 25, and 70 square meters, respectively. This system was simulated using the Matlab/Simulink software and tested with the experimental data. Furthermore, the evaluation of the proposed framework is validated using a real-time hardware-in-the-loop environment, which uses the FPGA-based OPAL-RT Simulator. © 2023 by the authors.