Browsing by Author "Rossignol, F."

Now showing 1 - 6 of 6

Magnetic domain studies of cobalt nanostructures
(2012) Nagaraja, H.S.; Nagaraja, K.K.; Rossignol, F.; Dumas-Bouchiat, F.; Champeaux, C.; Catherinot, A.
The pulsed laser deposition technique associated with a low energy cluster beam is used to deposit cobalt thin films with a thickness 100-200 nm and cobalt dots of a diameter 100-200 nm on silicon substrates. The deposited thin films of Co are composed of clusters of a size 10- 50 nm, with very few large grains as revealed by atomic force microscopy. The observations performed by magnetic force microscopy on as-grown thin films reveal randomly distributed out-of-plane magnetic domain structures. These magnetic domains are aligned linearly by applying an external magnetic field either perpendicular or parallel to the substrate during the deposition. In addition, the effect of film thickness and roughness on multidomains is reported. The increase of roughness resulted in the decrease of magnetic domain width from 200 to 100 nm. This decrease is accompanied by the appearance of instability in the stripe domain pattern. Well separated cobalt dots of diameter in the range of 100-200 nm are also deposited on silicon substrates, which show arc-like multidomains. The domains seem to be oriented along the long axis of the dots. The domain structure of Co nanodots is similar to that of Co thin films indicating strong magnetic coupling of clusters. Springer Science+Business Media, LLC 2012.
Magnetic domain studies of cobalt nanostructures
(2012) Nagaraja, H.S.; Nagaraja, K.K.; Rossignol, F.; Dumas-Bouchiat, F.; Champeaux, C.; Catherinot, A.
The pulsed laser deposition technique associated with a low energy cluster beam is used to deposit cobalt thin films with a thickness 100-200 nm and cobalt dots of a diameter 100-200 nm on silicon substrates. The deposited thin films of Co are composed of clusters of a size 10- 50 nm, with very few large grains as revealed by atomic force microscopy. The observations performed by magnetic force microscopy on as-grown thin films reveal randomly distributed out-of-plane magnetic domain structures. These magnetic domains are aligned linearly by applying an external magnetic field either perpendicular or parallel to the substrate during the deposition. In addition, the effect of film thickness and roughness on multidomains is reported. The increase of roughness resulted in the decrease of magnetic domain width from 200 to 100 nm. This decrease is accompanied by the appearance of instability in the stripe domain pattern. Well separated cobalt dots of diameter in the range of 100-200 nm are also deposited on silicon substrates, which show arc-like multidomains. The domains seem to be oriented along the long axis of the dots. The domain structure of Co nanodots is similar to that of Co thin films indicating strong magnetic coupling of clusters. © Springer Science+Business Media, LLC 2012.
Microwave assisted synthesis of rGO/ZnO composites for non-enzymatic glucose sensing and supercapacitor applications
(2017) Sreejesh, M.; Dhanush, S.; Rossignol, F.; Nagaraja, H.S.
Zinc oxide (ZnO) and Graphene Oxide (GO) are known to show good electrochemical properties. In this paper, rGO/ZnO nanocomposites have been synthesised using a simple microwave assisted method. The nanocomposites are characterized using XRD, Raman, SEM and TEM. XRD reveals the wurtzite structure of ZnO and TEM shows the heterogeneous nucleation of ZnO nanocrystals anchored onto graphene sheets. The electrochemical properties of the rGO/ZnO nanocomposite enhanced significantly for applications in glucose sensors and supercapacitors. The non-enzymatic glucose sensor of this nanocomposite tested using cyclic voltammetry (CV) and chronoamperometry, exhibits high sensitivity (39.78 mA cm?2 mM?1) and a lower detection limit of 0.2 nM. The supercapacitor electrode of rGO/ZnO nanocomposite exhibits a significant increase in specific capacitance. 2017 Elsevier Ltd and Techna Group S.r.l.
Microwave assisted synthesis of rGO/ZnO composites for non-enzymatic glucose sensing and supercapacitor applications
(Elsevier Ltd, 2017) Moolayadukkam, M.; Dhanush, S.; Rossignol, F.; Nagaraja, H.S.
Zinc oxide (ZnO) and Graphene Oxide (GO) are known to show good electrochemical properties. In this paper, rGO/ZnO nanocomposites have been synthesised using a simple microwave assisted method. The nanocomposites are characterized using XRD, Raman, SEM and TEM. XRD reveals the wurtzite structure of ZnO and TEM shows the heterogeneous nucleation of ZnO nanocrystals anchored onto graphene sheets. The electrochemical properties of the rGO/ZnO nanocomposite enhanced significantly for applications in glucose sensors and supercapacitors. The non-enzymatic glucose sensor of this nanocomposite tested using cyclic voltammetry (CV) and chronoamperometry, exhibits high sensitivity (39.78 mA cm?2 mM?1) and a lower detection limit of 0.2 nM. The supercapacitor electrode of rGO/ZnO nanocomposite exhibits a significant increase in specific capacitance. © 2017 Elsevier Ltd and Techna Group S.r.l.
rGO/MnO2 nanowires for ultrasonic-combined Fenton assisted efficient degradation of Reactive Black 5
(2017) Ramesh, M.; Rao, M.P.; Rossignol, F.; Nagaraja, H.S.
Reduced graphene oxide (rGO) coated manganese dioxide (MnO2) nanowires (NWs) were prepared by the hydrothermal method. Raman spectra confirmed the presence of rGO and the Brunauer-Emmett-Teller surface area of rGO/MnO2 NWs was found to be 59.1 m2g-1. The physico-chemical properties of prepared catalysts for the degradation of Reactive Black 5 (RB5) dye were investigated. 84% of RB5 dye in hydrogen peroxide solution was successfully degraded using rGO/MnO2 NWs, while only 63% was successfully degraded with pristine ?-MnO2 NWs in 60 min owing to the smaller crystallite size and large surface area. Further, the ultrasonic-combined Fenton process significantly enhanced the degradation rate to 95% of RB5 by the catalyst rGO/MnO2 NWs due to synergistic effects. The decomposition products identified using gas chromatography-mass spectrometry revealed a higher production rate of fragments in the ultrasonic-combined Fenton process. Therefore, rGO/MnO2 NWs with the ultrasonic-combined Fenton process is an efficient catalyst for the degradation of RB5, and may be used for environmental protection. IWA Publishing 2017.
rGO/MnO2 nanowires for ultrasonic-combined Fenton assisted efficient degradation of Reactive Black 5
(IWA Publishing 12 Caxton Street London SW1H 0QS, 2017) Ramesh, M.; Rao, M.P.; Rossignol, F.; Nagaraja, H.S.
Reduced graphene oxide (rGO) coated manganese dioxide (MnO2) nanowires (NWs) were prepared by the hydrothermal method. Raman spectra confirmed the presence of rGO and the Brunauer-Emmett-Teller surface area of rGO/MnO2 NWs was found to be 59.1 m2g-1. The physico-chemical properties of prepared catalysts for the degradation of Reactive Black 5 (RB5) dye were investigated. 84% of RB5 dye in hydrogen peroxide solution was successfully degraded using rGO/MnO2 NWs, while only 63% was successfully degraded with pristine ?-MnO2 NWs in 60 min owing to the smaller crystallite size and large surface area. Further, the ultrasonic-combined Fenton process significantly enhanced the degradation rate to 95% of RB5 by the catalyst rGO/MnO2 NWs due to synergistic effects. The decomposition products identified using gas chromatography-mass spectrometry revealed a higher production rate of fragments in the ultrasonic-combined Fenton process. Therefore, rGO/MnO2 NWs with the ultrasonic-combined Fenton process is an efficient catalyst for the degradation of RB5, and may be used for environmental protection. © IWA Publishing 2017.