Browsing by Author "Rao, K.R."

Now showing 1 - 3 of 3

A Review on Mechanical Properties of Natural Fibre Reinforced PLA Composites
(Bentham Science Publishers, 2023) Kumar Sinha, A.K.; Rao, K.R.; Soni, V.K.; Chandrakar, R.; Sharma, H.K.; Kumar, A.
Presently, scientists and researchers are in an endless quest to develop green, recyclable, and eco-friendly materials. Natural fibre reinforced polymer composites became popular among materialists due to their lightweight, high strength-to-weight ratio, and biodegradability. However, all-natural fibre reinforced polymer composites are not biodegradable. Polymer matrices like poly-lactic acid (PLA) and poly-butylene succinate (PBS) are biodegradable, whereas epoxy, polypropylene, and polystyrene are non-biodegradable polymer matrices. Besides biodeg-radability, PLA has been known for its excellent physical and mechanical properties. This review emphasises the mechanical properties (tensile, flexural, and impact strengths) of natural fibre-reinforced PLA composites. Factors affecting the mechanical properties of PLA composites are also discussed. It also unveils research gaps from the previous literature, which shows that limited studies are reported based on modeling and prediction of mechanical properties of hybrid PLA composites reinforcing natural fibres like abaca, aloe vera, and bamboo fibres. © 2023 Bentham Science Publishers.
Microstructural and mechanical properties of AlCoCrCuFeNiSix (x = 0 and 0.9) high entropy alloys
(Elsevier Ltd, 2021) Chandrakar, R.; Kumar, A.; Chandraker, S.; Rao, K.R.; Chopkar, M.
In this work, the effect of addition of Si on the phase evolution and mechanical properties of AlCoCrCuFeNiSix alloy system has been studied. The High Entropy Alloys (x = 0 and 0.9) have been synthesised by powder metallurgy route which includes mechanical alloying (MA) and spark plasma sintering. X-ray diffraction technique was performed to understand the alloying behaviour and to investigate the phase formation of the high entropy alloys. The samples after spark plasma sintering comprised mainly of body centered cubic structured phase with a small extent of face centered cubic structured phase. With the addition of silicon, the XRD peak intensity of body centered cubic appears strong compared to the face centered cubic structured phase. Moreover, no intermetallic is observed in AlCoCrCuFeNi high entropy alloy system. However, further accumulation of Silicon results in the evolution of sigma (?) phase. © 2020 Elsevier Ltd
Phase Evolution of Novel MoNbSiTiW Refractory High-Entropy Alloy Prepared by Mechanical Alloying
(Springer, 2022) Prakash, O.; Chandrakar, R.; Chandraker, S.; Rao, K.R.; Kumar, R.; Kumar, A.; Dubey, V.
Refractory high-entropy alloys (RHEAs) are new types of material that have been developed for high-temperature applications. RHEAs should have enhanced high-temperature strength while maintaining a sufficient level of room-temperature toughness. The phase evolution of novel MoNbSiTiW RHEAs was investigated after mechanical alloying (MA) for 35 h. X-ray diffraction (XRD) was used to analyze the phase evolution, and analysis of particle morphologies was done using a scanning electron microscope (SEM) equipped with energy dispersive spectroscopy (EDS). XRD results indicate that NbMoSiTiW RHEAs with up to 10 h of mechanical alloying have a stable solid solution phase with body centered cubic (BCC) structure. Further milling of NbMoSiTiW RHEAs promotes the evolution of intermetallic compounds until 35 h of mechanical alloying. The Williamson-Hall process was incorporated for crystalline size and lattice strain measurement and the results show that, after 35 h of mechanical alloying, the crystalline size decreased from 298 nm to 25 nm, and an enhancement in lattice strain was observed from 0.1% to 0.65%. © 2022, The Minerals, Metals & Materials Society.