Browsing by Author "Pattabi, M."

Now showing 1 - 4 of 4

Conversion of microfiltration membrane into nanofiltration membrane by vapour phase deposition of aluminium for desalination application
(2011) Padaki, M.; Isloor, A.M.; Nagaraja, K.K.; Nagaraja, H.S.; Pattabi, M.
Preparation and modification of NF membrane are challenging aspects in research. In the present work, we have synthesised Polysulfone (PSf) microfiltration membrane and reduced the pore size to nano level by physical vapour deposition (PVD) of aluminium metal. Membrane pore size was reduced from micro pore to nano pore, which rejected 42.22% of NaCl from the solution with 164L/m2h. And also water permeation decreases from 1.10324-10-10 to the 9.141-10-12. The SEM and AFM pictures showed the surface modification and metal deposition in the pores. The performance of the membrane was studied by dead end flow cell using 3.5% of NaCl solution, in which PVD membrane showed 42.22% of rejection with 16.4L/m2h flux. Thermal analysis from DSC showed Tg of 265 C. Contact angle measurement, and water uptake were also reported. 2011 Elsevier B.V.
Conversion of microfiltration membrane into nanofiltration membrane by vapour phase deposition of aluminium for desalination application
(2011) Padaki, M.; Isloor, A.M.; Nagaraja, K.K.; Nagaraja, H.S.; Pattabi, M.
Preparation and modification of NF membrane are challenging aspects in research. In the present work, we have synthesised Polysulfone (PSf) microfiltration membrane and reduced the pore size to nano level by physical vapour deposition (PVD) of aluminium metal. Membrane pore size was reduced from micro pore to nano pore, which rejected 42.22% of NaCl from the solution with 164L/m2h. And also water permeation decreases from 1.10324-10-10 to the 9.141-10-12. The SEM and AFM pictures showed the surface modification and metal deposition in the pores. The performance of the membrane was studied by dead end flow cell using 3.5% of NaCl solution, in which PVD membrane showed 42.22% of rejection with 16.4L/m2h flux. Thermal analysis from DSC showed Tg of 265°C. Contact angle measurement, and water uptake were also reported. © 2011 Elsevier B.V.
Studies on copper coated polysulfone/modified poly isobutylene alt-maleic anhydride blend membrane and its antibiofouling property
(2013) Isloor, A.M.; Ganesh, B.M.; Isloor, S.M.; Ismail, A.F.; Nagaraj, H.S.; Pattabi, M.
As nanofiltration is gaining more and more importance in the field of desalination, one has to address the many obstacles in order to achieve effective/efficient filtration. One such issue is biofouling and microbial attack to the membrane. This paper describes about the study on copper coating onto the membrane surface as biofouling protective layer. This is an attempt to come up with a new approach for desalination and an antimicrobial membrane. The work indicates that, the copper coated membrane can resist the possible microbial attack to some extent while maintaining good salt rejection and appreciable flux. SEM and EDX studies had shown the distribution of copper on the membrane surface. The copper coated membrane had shown the maximum salt rejection of about 96% for 3500ppm NaCl solution and also it had shown the pure water flux of 36Lm-2h-1. 2012 Elsevier B.V.
Studies on copper coated polysulfone/modified poly isobutylene alt-maleic anhydride blend membrane and its antibiofouling property
(2013) Isloor, A.M.; Ganesh, B.M.; Isloor, S.; A.F., A.F.; Nagaraj, H.S.; Pattabi, M.
As nanofiltration is gaining more and more importance in the field of desalination, one has to address the many obstacles in order to achieve effective/efficient filtration. One such issue is biofouling and microbial attack to the membrane. This paper describes about the study on copper coating onto the membrane surface as biofouling protective layer. This is an attempt to come up with a new approach for desalination and an antimicrobial membrane. The work indicates that, the copper coated membrane can resist the possible microbial attack to some extent while maintaining good salt rejection and appreciable flux. SEM and EDX studies had shown the distribution of copper on the membrane surface. The copper coated membrane had shown the maximum salt rejection of about 96% for 3500ppm NaCl solution and also it had shown the pure water flux of 36Lm-2h-1. © 2012 Elsevier B.V.