Browsing by Author "Lee, S.U."

Now showing 1 - 5 of 5

Assessment of the mechanical properties of monolayer graphene using the energy and strain-fluctuation methods
(2018) Thomas, S.; Ajith, K.M.; Lee, S.U.; Valsakumar, M.C.
Molecular statics and dynamics simulations were performed to investigate the mechanical properties of a monolayer graphene sheet using an efficient energy method and strain-fluctuation method. Using the energy method, we observed that the mechanical properties of an infinite graphene sheet are isotropic, whereas for a finite sheet, they are anisotropic. This work is the first to report the temperature-dependent elastic constants of graphene between 100 and 1000 K using the strain-fluctuation method. We found that the out-of-plane thermal excursions in a graphene membrane lead to strong anharmonic behavior, which allows large deviations from isotropic elasticity. The computed Young's modulus and Poisson's ratio of a sheet with an infinite spatial extent are 0.939 TPa and 0.223, respectively. We also found that graphene sheets with both finite and infinite spatial extent satisfy the Born elastic stability conditions. We extracted the variation in bending modulus with the system size at zero kelvin (0.83 eV) using a formula derived from the Foppl-von Karman approach. When the temperature increases, the Young's modulus of the sample decreases, which effectively reduces the longitudinal and shear wave velocities. 2018 The Royal Society of Chemistry.
Assessment of the mechanical properties of monolayer graphene using the energy and strain-fluctuation methods
(Royal Society of Chemistry, 2018) Thomas, S.; Ajith, K.M.; Lee, S.U.; Valsakumar, M.C.
Molecular statics and dynamics simulations were performed to investigate the mechanical properties of a monolayer graphene sheet using an efficient energy method and strain-fluctuation method. Using the energy method, we observed that the mechanical properties of an infinite graphene sheet are isotropic, whereas for a finite sheet, they are anisotropic. This work is the first to report the temperature-dependent elastic constants of graphene between 100 and 1000 K using the strain-fluctuation method. We found that the out-of-plane thermal excursions in a graphene membrane lead to strong anharmonic behavior, which allows large deviations from isotropic elasticity. The computed Young's modulus and Poisson's ratio of a sheet with an infinite spatial extent are 0.939 TPa and 0.223, respectively. We also found that graphene sheets with both finite and infinite spatial extent satisfy the Born elastic stability conditions. We extracted the variation in bending modulus with the system size at zero kelvin (0.83 eV) using a formula derived from the Foppl-von Karman approach. When the temperature increases, the Young's modulus of the sample decreases, which effectively reduces the longitudinal and shear wave velocities. © 2018 The Royal Society of Chemistry.
Mechanically robust, self-healing graphene like defective SiC: A prospective anode of Li-ion batteries
(Elsevier B.V., 2021) Manju, M.S.; Thomas, S.; Lee, S.U.; Ajith, K.M.
First-principles density functional theory (DFT) computations are carried out to assess the potential application of a monolayer Silicon carbide (SiC) with the presence of topological and point defects. Results show that the unstable binding of pristine SiC makes it a poor candidate for the anode material. However, the introduction of vacancy and Stone-Wales type topological defect in SiC possesses a stable Li binding property. Besides, all the defective configuration showed higher electrical conductivity, superior mechanical robustness and stable formation energy. We also observed a structural reorientation from point to topological defect with a 5-8-5 ring formation in C and Si-C bi-vacancy and a Li-mediated phenomenon in the case of Si bi-vacancy. All the configurations under consideration exhibited low open-circuit voltage (0.1 V), a low Li diffusion barrier (~0.77 eV), and a fairly high specific capacity (501 mAh/g for Stone-Wales) compared to the conventional graphite anode. Besides, the ab initio molecular dynamics calculations confirmed the thermal stability and structural integrity of the defective SiC. Based on these findings, the present study suggests that SiC with a Stone-Wales defect can be a forthcoming candidate for the anode of LIBs. © 2020 Elsevier B.V.
Strain induced structural transformation, mechanical and phonon stability in silicene derived 2D-SiB
(Korean Society of Industrial Engineering Chemistry A-803 Twin Bldg 275-3 Yangjae-Dong Seocho-Kul Seoul 137-130, 2020) M.s, M.; Thomas, S.; P, A.; Lee, S.U.; Ajith, A.K.
Two-dimensional monolayer SiB is a silicene derivative exhibiting buckling of atoms similar to that seen in silicene. This manuscript presents a systematic study of the strain-dependent variation of the structural, mechanical, and dynamical properties of SiB. Strain was applied in the uniaxial armchair, uniaxial zigzag, and biaxial directions within the range of ?0.2 to 0.3. The resultant strain energy plot indicates anisotropic behavior of SiB in these directions. The SiB showed a mechanical strength that was higher than its counterpart, silicene, by an order of 30%. The elastic constant data from the undeformed SiB indicated an anisotropic nature, which was also seen with all the strain directions. Charge density contours, along with Bader charge analysis, confirmed the ionic nature of SiB in its original form. This nature became covalent as the strain varied from the compressive to the tensile regime in the uniaxial zigzag and biaxial directions. The major finding described in this manuscript is a new flat conformation having orthorhombic symmetry in contrast to the buckled structure. In addition, this material was observed to attain stability with the application of uniaxial tensile armchair and zigzag directional strains. Ab-initio molecular dynamics simulation confirmed the thermal stability of SiB in its new conformation. © 2020 The Korean Society of Industrial and Engineering Chemistry
Strain-induced work function in h-BN and BCN monolayers
(Elsevier B.V., 2020) Thomas, S.; Manju, M.S.; Ajith, K.M.; Lee, S.U.; Asle Zaeem, M.
In the last decade, research activities of semiconducting two-dimensional (2D) electronic materials has received widespread attention, and the work function analysis is a significant parameter for investigating the feasible optoelectronic activity of these 2D materials. Here, we report a comparative study using ab-inito based density functional theory calculations to examine the impact of uniaxial and biaxial tensile and compressive strains on the work functions of boron nitride (h-BN) and boron carbonitride (BCN) monolayers. Unlike h-BN which has a large bandgap of 5 eV, the computed direct bandgap of BCN monolayer is 1.18 eV, which is beneficial for use in optoelectronic applications. We noticed that the calculated work function of both h-BN and BCN decreases (increases) continuously by increasing the compressive (tensile) strain irrespective of the strain directions. The observed variations in the work function in both h-BN and BCN are found to be related to the modulation of Fermi energy under compressive and tensile strains. The change in bond length between the atoms changes the total energy as a function of applied strain. Moreover, the direct bandgaps of both h-BN and BCN remain unaffected within the studied range of compressive and tensile strains, which can be beneficial for their use in photovoltaic devices. We also noticed that elastic modulus and Poisson's ratio are found to be anisotropic and decrease (increase) with the application of uniaxial tensile (compressive) strain. In addition, both h-BN and BCN possess high longitudinal and transverse wave velocities. The insight gained from this study will stimulate the research on BCN in view of relevant technological applications in the fields of nanoelectronics and optoelectronics. © 2020 Elsevier B.V.