Repository logo
Communities & Collections
All of DSpace
  • English
  • العربية
  • বাংলা
  • Català
  • Čeština
  • Deutsch
  • Ελληνικά
  • Español
  • Suomi
  • Français
  • Gàidhlig
  • हिंदी
  • Magyar
  • Italiano
  • Қазақ
  • Latviešu
  • Nederlands
  • Polski
  • Português
  • Português do Brasil
  • Srpski (lat)
  • Српски
  • Svenska
  • Türkçe
  • Yкраї́нська
  • Tiếng Việt
Log In
Have you forgotten your password?
  1. Home
  2. Browse by Author

Browsing by Author "Ilango, I."

Filter results by typing the first few letters
Now showing 1 - 5 of 5
  • Results Per Page
  • Sort Options
  • No Thumbnail Available
    Item
    Amino acid functionalized metal oxide nanocomposite for the removal of fluoroquinolones
    (Elsevier Ltd, 2023) Ilango, I.; Mohan Balakrishnan, R.M.
    Antibiotic consumption has increased globally, and its discharge into water bodies at concentrations ranging from a few ng/L to mg/L has a detrimental effect on the ecosystems. Amino acid functionalized nickel ferrite nanoparticles were chosen to improve the stability of bare nanoparticles and prevent oxidation and leaching ions in nanoparticles thereby targeting the antibiotics in the contaminated water bodies. The removal of ciprofloxacin and lomefloxacin hydrochloride in the aqueous phase was investigated using a hydrothermally synthesized L-Leucine functionalized nickel ferrite nanocomposite (NFO@L). Various analytical techniques were used to analyze L-Leucine functionalized nickel ferrite, and the nanocomposite's average particle diameter was determined to be between 11 and 15 nm. The maximal measured zeta potential was −21.5 mV. Fourier transform infrared spectroscopy (FTIR), ninhydrin assay and X-ray diffraction (XRD) analysis confirmed the attachment of L-Leucine onto nickel ferrite. The nanocomposite's surface-to-volume ratio was calculated to be 92.916 m2/g. The S-shaped curve from the vibrating sample magnetometer analysis reflected the superparamagnetic behaviour of the nanocomposite with a saturation magnetization of 0.665 emu/g. Various parametric experiments were conducted, in which 93.549% ciprofloxacin was removed in 120 min at 303 K, pH 8 and NFO@L dosage of 100 mg in 100 mL whereas 75.192% lomefloxacin hydrochloride was removed in 140 min at 333 K, pH 9 and NFO@L dosage of 70 mg in 100 mL. The plot of experimental datum in kinetic and isotherm studies fitted well with the Pseudo second order kinetic model and Langmuir isotherm. There was no evidence of iron ions leaching from the final analyte. The recycle and regeneration studies showed good stability with a small reduction after four cycle runs. Based on these findings, the Leucine functionalized nickel ferrite nanocomposite could be a potent adsorbent for the removal of low-concentrated ciprofloxacin and lomefloxacin hydrochloride in the wastewater. © 2023
  • No Thumbnail Available
    Item
    Cobalt ferrite nanoparticles and peroxymonosulfate system for the removal of ampicillin from aqueous solution
    (Elsevier Ltd, 2021) Mohan Balakrishnan, R.M.; Ilango, I.; Gamana, G.; Bui, X.-T.; Arivalagan, A.
    Emerging contaminants (EC) are classified as major leading issues in treating wastewater, especially drugs and pharmaceuticals in the urban regions, and the detection and degradation of these pollutants have become an arduous task. Ampicillin is one such portentous ?- lactam antibiotic compound used extensively in the medical field for their antimicrobial and growth-enhancing properties in humans as well in veterinary sectors. Due to continuous exposure, the microbes in due course developed a shield towards the implication of antibiotics. The degradation of Ampicillin has also been succeeded by mixed metal oxides nanoparticles generally specified as AxB2-xO4, which has been a fundamental catalyst in the Advanced Oxidation Process (AOPs). Magnetic nanoparticles, Cobalt Ferrite nanoparticles (CoFe2O4) were synthesized by the coprecipitation method further; it has employed in the activation of oxidizing agent Peroxymonosulfate (PMS) in the Ampicillin degradation. The material and chemical characterization of synthesized nanoparticles using XRD, TEM, SEM-EDX, and FTIR analysis were done. From the investigation, the nanoparticles were found to exhibit a cubic spinel configuration with a crystallite size of 10.10 nm. The impact of working parameters, such as the presence/absence of catalyst, pH, PMS concentration, and the time required for ampicillin degradation, were investigated. At neutral pH with 0.1 g/L of catalyst measure, 0.2 mM of PMS, 90 ± 1.94 % Ampicillin degraded over 25 min of contact time. The degraded intermediate products of Ampicillin were identified using LC–MS analysis. © 2020 Elsevier Ltd
  • No Thumbnail Available
    Item
    Functionalization of β-cyclodextrin onto NiFe2O4 nanoparticles for the removal of ketoprofen and diclofenac from the aqueous solutions
    (Institute for Ionics, 2024) Ilango, I.; Mohan Balakrishnan, R.M.; Visvanathan, C.; Bui, X.-T.; Velusamy, P.
    A new β-CD functionalized nickel ferrite nanocomposite was synthesized and used to remove pharmaceutical drugs, such as ketoprofen (KF) and diclofenac (DCF). The co-precipitation approach was utilised to synthesize nickel ferrite (NFO) nanoparticles, which were then functionalized with TEOS to form NFO@SiO2; β-cyclodextrin was then functionalized using GPTMS as an interface to form NFO@SiO2@β-CD. FTIR, ZD, FE-SEM, EDX, TGA/DTG, VSM, BET, zeta potential and particle size analysis were then used to characterise the nanocomposites. The NFO@SiO2@β-CD has an average diameter of 109.1 nm, superparamagnetic behaviour, a mesoporous surface and a specific surface of 20.78 m2/g. The functionalized NFO@SiO2@ β-CD nanocomposite removed 94% of diclofenac in 5 min and 80% of ketoprofen in 360 min with the adsorption capacities of 8.46 and 0.54 mg/g, respectively. The obtained experimental datum for both the pollutants was fitted in kinetic and isotherm models, with the pseudo-second-order kinetic model and Freundlich adsorption isotherm showing the best fit with the highest regression of R 2 = 0.99. The nanocomposite was regenerated using 0.1 M NaOH and recycled for about four consecutive cycles in which the reduction in the removal efficiency of ketoprofen and diclofenac was observed to be 51.36% and 64%, respectively. These results suggested that the NFO@SiO2@β-CD nanocomposite could be used specifically to target the low-concentrated pharmaceutical pollutants. Graphical Abstract: Schematic representation of Functionalization of β-Cyclodextrin onto NiFe2O4 nanoparticles for the removal of ketoprofen and diclofenac from the aqueous solutions. [Figure not available: see fulltext.] © 2023, The Author(s) under exclusive licence to Iranian Society of Environmentalists (IRSEN) and Science and Research Branch, Islamic Azad University.
  • No Thumbnail Available
    Item
    Stimulation of peroxymonosulfate using nickel ferrite nanoparticles for the degradation of Lomefloxacin hydrochloride and caffeine
    (Springer Science and Business Media Deutschland GmbH, 2025) Ilango, I.; Mohan Balakrishnan, R.; Visvanathan, C.; Bui, X.-T.
    Lomefloxacin Hydrochloride (LFH), an antibacterial agent, and caffeine (CAF), a cognitive enhancer, are excreted by humans and end up in municipal sewage effluents and surface waters. This pharmaceutical concentration in bodies of water/treatment plants poses a serious threat to both aquatic habitats and humans. A laboratory batch study on the degradation of LFH, CAF and LC (CAF and LFH mixed solution) was carried out using NFO nanoparticles to stimulate potassium peroxymonosulfate (PMS). The NFO nanoparticles were synthesized through a co-precipitation method and characterised using FTIR, XRD, FESEM/EDX, TGA/DTA/DTG, BET, AFM, VSM, and Zeta potential. The particle size distribution from FESEM (using ImageJ software) revealed that 83.3% of particles are ? 100 nm, its mean and standard deviation were estimated to be 43.87 nm and 20 to 25 nm. The NFO nanoparticles’ specific surface area was estimated to be 112.02 m2/g, and the magnetic properties of the NFO nanoparticles were investigated using VSM analysis. The parametric study included bare NFO, PMS without catalyst, pH, catalyst dosage, PMS variation with optimized catalyst, initial concentration of LFH and CAF, and reaction time, with nearly 94.34% LFH was degraded in 220 min, 100% CAF was degraded in 80 min, 78.07% LC was degraded in 40 min. The degraded compounds m/z of LFH, CAF and LC were identified using LC–MS. The recycling and regeneration of NFO nanoparticles were investigated to determine the stability of the NFO nanoparticles in the degradation of LFH and CAF in which the degradation efficiency decreased to 90.68% and 64.1% respectively upon the third wash with distilled water. As a result, the NiFe2O4/PMS system showed improved degradation even after three recycle runs, making it an efficient and economical system for degrading LFH, CAF and even to multi-pharmaceutical pollutants. © The Author(s), under exclusive licence to Springer Nature Switzerland AG 2025.
  • No Thumbnail Available
    Item
    Zinc-decorated barium oxide nanorods for the effective sunlight-induced catalytic degradation of Irgalite violet dye
    (Springer Science and Business Media Deutschland GmbH, 2023) Ilango, I.; Susanna, D.; Gabriella, R.; Mohan Balakrishnan, R.M.; JagadeeshBabu, J.
    Simple and facile fabrication of barium oxide (BaO) and zinc-decorated barium oxide (ZnBaO) nanocatalysts was accomplished through a co-precipitation technique. Irgalite violet (IV) dye was subjected to sunlight-induced catalytic degradation using novel catalyst ZnBaO nanorods. The synthesized nanocatalysts were subjected to various analytical techniques, including FE-SEM/EDX, XRD and FTIR, for their comprehensive characterization. X-ray diffraction confirmed the crystallinity of BaO and ZnBaO nanocatalysts. The FE-SEM image of the ZnBaO nanocatalyst revealed the occurrence of distinct nanorods with a mean size of 22.5 nm possessing an aspect ratio of 4.95. A characteristic UV absorbance peak was observed at 310 nm for BaO and 380 nm for ZnBaO nanocatalysts. The substitution of Zn to BaO led to a favorable decrease in the band gap energy from 5.315 eV (BaO) to 2.6 eV (ZnBaO). The synthesized BaO and ZnBaO nanocatalysts were used in parametric studies by varying catalyst dosage, irradiation time, pH and initial dye concentration. The ZnBaO nanorods showed a maximum degradation efficiency of 99.9% at pH 11 with a catalyst dosage of 40 mg/50 mL containing 5 mg/L dye concentration. The recyclability studies showed that the ZnBaO nanorods could serve as a potential catalyst for degrading dyes. © 2023, The Author(s), under exclusive licence to Springer Nature Switzerland AG.

Maintained by Central Library NITK | DSpace software copyright © 2002-2026 LYRASIS

  • Privacy policy
  • End User Agreement
  • Send Feedback
Repository logo COAR Notify