Browsing by Author "Hamzah, H.T."

Now showing 1 - 2 of 2

Effect of solvent pre-treatment on microwave assisted pyrolysis of Spirulina (Algal Biomass) and Ficus benghalensis (Lignocellulosic Biomass) for production of biofuels: comparative experimental studies
(Springer Science and Business Media Deutschland GmbH, 2025) Varma, J.V.; Sridevi, V.; Musalaiah, M.; King, P.; Hamzah, H.T.; Tanneru, H.K.; Ramesh, R.; Malleswari, G.B.
The study focuses on the comparison of microwave-assisted pyrolysis (MAP) of Spirulina, (algal biomass), and aerial roots of Ficus benghalensis (lignocellulosic biomass) as feedstocks for biofuel production. Solvent ethanol was used to pretreat feedstocks. The experiments were carried out using a microwave power of 450 W, considering both fresh and solvent-pretreated feedstocks. Solvent-pretreated Spirulina demonstrated a high bio-oil yield of 56.1 wt. % and a biochar yield of 13.5 wt. %, whereas for solvent-pretreated Ficus benghalensis, the corresponding yields were 35.4 wt. % and 12.3 wt.%. Both solvent-treated and fresh algal biomass feedstocks showed higher yields than lignocellulose biomass. Pre-treatment of feedstocks showed positive results on microwave energy consumption and pyrolysis index. The average heating values were 27.3 0C/min for pretreated Spirulina and 46.2 0C/min for pretreated Ficus benghalensis. Fourier Transform Infrared (FTIR) characterized the obtained bio-oils and biochar. The FTIR results indicated the presence of distinctive functional groups such as N=C=O, O=C=O, N-O, and S=O in MAP of Spirulina bio-oil, and C=C and C-I stretching in MAP of Ficus benghalensis bio-oil. The FTIR results for biochar were consistent across both feedstocks, showing common functional groups such as C-Cl, C=C, C-H, O-H, C-F, and S=O. However, in the case of Spirulina, an extra functional group, C=N, was also detected. Pre-treatment of microalgal biomass is essential for the maximal recovery of biofuel precursors packed inside the complex microalgal cell wall. It was concluded that pre-treatment is an efficient way to improve the yield and composition of bio-oil with low microwave power and short microwave irradiation time. Efforts are still required to develop an economical and environmentally benign pre-treatment approach to facilitate 100% biomass conversion to added-value products. © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2024.
Synergistic effects and product yields in microwave-assisted in-situ co-pyrolysis of rice straw and paraffin wax
(Institution of Chemical Engineers, 2024) Hamzah, H.T.; Sridevi, V.; Surya, D.V.; Ramesh, P.; Sankar Rao, C.; Palla, S.; Abdullah, T.A.
Microwave-assisted pyrolysis is one of the most efficient methods for solid waste management. This study employed microwave-assisted catalytic co-pyrolysis to convert Paraffin wax (PW) and rice straw (RS) into valuable char, gas, and oil products. KOH and graphite were used as the catalyst and susceptor, respectively. The RS and PW blend served as the feedstock (with a blend ratio of 0–10 g). The yields of co-pyrolysis at different blending ratios of RS: PW exhibited variations in char content (ranging from 9.8% to 22.6% by wt.), oil production (ranging from 34.1% to 76.9% by wt.), and gas formation (ranging from 13.2% to 47.5% by wt.). The effects of the RS: PW ratio on the average heating rate, feedstock conversion, and product yields were also investigated. Analyses were performed to assess the synergistic impacts on product yields, average heating rates, and conversion factors. Notably, co-pyrolysis synergy led to increased oil and char production. Furthermore, we conducted FTIR analysis on the oil and char produced through the catalytic co-pyrolysis of RS: PW. In conjunction with co-pyrolysis synergy, the catalyst facilitated the formation of amides, alkenes, aliphatic compounds, and aromatic compounds. © 2023 The Institution of Chemical Engineers