Browsing by Author "Depu Kumar Patro, B."

Filter results by typing the first few letters
Now showing 1 - 2 of 2
  • No Thumbnail Available
    Item
    Effect of Laser Surface Modification on Texture, Roughness, Wettability and Surface Energy of Hastelloy C22, C276 & X
    (Trans Tech Publications Ltd, 2024) Suvin, P.S.; Singh, A.; Depu Kumar Patro, B.; Edachery, V.; Kailas, S.V.; Horng, J.H.
    Hastelloy is a nickel-chromium-molybdenum-iron-based alloy and a member of the ‘superalloy’ family. Hastelloy has exceptional properties like high strength, wear resistance and hightemperature stress-corrosion resistance. Therefore, Hastelloy is used in gas turbines, power plants, metal injection molding, etc. Many industrial applications are related to the properties of the surface. Wettability is a key surface property that affects applications like lubrication, adhesion, coating, heat conduction, etc. Laser Texturing is an excellent method to modify the surface properties of materials like metal, polymers and ceramic. In the present study, a carbon dioxide laser created unidirectional textures on Hastelloy (C22, C276, X). Different sets of unidirectional textures were formed by changing the laser power and frequency. Various roughness parameters were compared for every laser parameter. In this paper, the effective change in wettability properties of Hastelloy (C22, C276, X) after the Laser texturing process for a range of power and frequency were studied under DI water and glycerol as test fluids. Results show that the contact angle of the test fluid increases as the laser power increases, and the contact angle decreases as the laser frequency increases for all three superalloys. The surface energy of a given set of samples was also measured using the recorded contact angle of DI water and Glycerol by the OWRK equation. Similar trends were found in surface energy for all three Hastelloy. © 2024 Trans Tech Publications Ltd, Switzerland.
  • No Thumbnail Available
    Item
    Investigating the Wettability, Rheological, and Tribological Properties of Ammonium-Based Protic Ionic Liquids as Neat Lubricants for Steel–Steel and Steel–Aluminium Contacts
    (Multidisciplinary Digital Publishing Institute (MDPI), 2023) Depu Kumar Patro, B.; Suvin, P.S.; Kreivaitis, R.; Gumbyte, M.
    This study aims to evaluate the tribological properties of two protic ionic liquids (PILs) under different tribological conditions as a sustainable alternative for mineral oil-based neat lubricants. The synthesis of PILs in this study uses a relatively simple and less expensive method. The Fourier transform infrared (FTIR) spectroscopy results help validate the synthesised PILs’ formation. Further, their physicochemical and tribological properties were investigated. The PILs as neat lubricants were tested on a ball-on-plate reciprocating tribometer using bearing steel–bearing steel and bearing steel–aluminium alloy friction pairs at 30 °C and 80 °C. The results show that the investigated PILs significantly reduced the coefficient of friction and wear. The dodecylamine-based PILs performed better in friction and wear reduction than the other investigated lubricants. The formation of the adsorption layer on the friction pairs was assumed to be the dominant friction and wear reduction mechanism. © 2023 by the authors.