Browsing by Author "Das, P.P."

Now showing 1 - 20 of 33

Activated carbon- supported Vanado-nickelate (IV) based hybrid materials for energy application
(Elsevier Ltd, 2021) Maity, S.; BM, N.; Kella, T.; Shee, D.; Das, P.P.; Mal, S.S.
The rapid development of supercapacitor (SC) technology leads to increased demand for nanofabrication of novel and effective electroactive hybrid materials for next-generation energy storage devices. Herein, nickel tetradecavanadate, K2H5[NiV14O40](NiV14), is doped into porous activated carbon (AC), for the first time, in different wt.% in order to investigate the homogeneous loading of the inorganic metal-oxide component on the AC matrix. The resulting complex, AC-NiV14, is found to have possessed an enhanced electrochemical characteristic (for both symmetric and asymmetric SC cell), which operates at a significantly higher potential of 1.2 V. The combination of the double-layer capacitance (EDLC) and the redox-active polyoxometalate cluster leads to an intrinsic increase in specific capacitance (capacity) (from 45.3 Fg?1 (54.4 Cg?1) for AC to 316 Fg?1 (379.2 Cg?1) for 15 wt.% AC-NiV14 at a current density of 1 Ag?1). It was also observed that there is an increase of 20% in the operating voltage compared to conventional AC supercapacitors with acidic aqueous electrolytes. Firstly, symmetric supercapacitor's electrochemical performances of various wt.% of NiV14 composition were studied in acidic aqueous electrolyte (0.5 M H2SO4) solution. We observed that the 15 wt.% of AC-NiV14 hybrid electrode showed remarkable specific energy value (~63.2 Wh kg?1) compared with pristine AC and NiV14 electrodes, separately. Besides, the asymmetric layout (AC//AC-NiV14) increased the potential window up to 1.5 V and enhanced the specific energy and power values (90.1 Whkg?1 and 2400 Wkg?1, respectively), with 98% coulombic efficiency. Meanwhile, the AC-NiV14//NiV14 asymmetric cell possesses a specific capacitance (capacity) of 375 Fg?1 (450 Cg?1) with a maximum power of 3140 Wkg?1 at the high current density of 2 Ag?1. © 2021 Elsevier Ltd
Capacitance and impedance spectroscopy studies of polymer light emitting diodes based on MEH-PPV:BT blends
(Elsevier Ltd, 2019) K M, N.K.; Sterin, N.S.; Das, P.P.; Umesh, G.; Satyanarayan, M.N.
Light emitting polymer poly [2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) is blended with a wide bandgap electron transport material benzothiadiazole (BT) and its effect on the electronic properties has been studied by capacitance and impedance spectroscopy (IS) in PLEDs. The impedance data is fitted using equivalent circuit models and the minimum parallel resistance (Rp) at zero bias have been obtained for 1:3 ratio of MEH-PPV:BT blended devices. The negative capacitance (NC) shows the occurrence of the trap-assisted non-radiative recombination mechanism at low frequencies in the unblended MEH-PPV PLEDs. Further, this behavior is seen to be reduced in PLEDs with MEH-PPV:BT blends. This clearly suggests that the blending of MEH-PPV and BT at different weight ratios results in the suppression of trap-assisted recombination. This can be attributed to the elimination of trap states due to the dilution of semiconductor material on account of the addition of wide bandgap host material. Moreover, the blended devices have shown a significant improvement in the conductivity at small bias voltages. © 2019 Elsevier B.V.
Carbon Nanotube-Supported Vanadium Substituted Phospho-Molybdate Nanohybrid for Supercapacitor Applications
(John Wiley and Sons Inc, 2025) Biradar, B.R.; Swetha, M.T.; Thathron, N.; Puniyanikkottil, M.A.; Hanchate, A.; Das, P.P.; Mal, S.S.
Owing to the depletion of conventional energy sources, our civilization is slowly transitioning to renewables. Therefore, designing effective energy storage systems is one of the most pressing technical demands. The quest for improved energy and power densities in energy storage devices, particularly those with long cycle life, has pushed the investigation of novel materials intended to build effective supercapacitors. In this work, nanohybrid materials are synthesized using a hydrothermal technique by mixing carbon nanotubes and a polyoxometalate cluster, H4[PVMo11O40].xH2O. Henceforth, this complex is acronymed as CNT-PVMo11. Further, electrochemical analysis of CNT-PVMo11 nanohybrid is carried out to examine various characteristics of the supercapacitor cell made with this nanohybrid. The cyclic voltammetry confirms the diffusive-dominant charge-storage process, quantifying a 72.83% diffusion mechanism at a scan rate of 1 mV s?1. The galvanostatic charge–discharge analysis of CNT-PVMo11 nanohybrid material showed a specific capacitance of 229.35 F g?1 with energy and power densities of 31.85 Wh kg?1 and 2000 W kg?1, respectively, at 1 A g?1 current density. The electrode material also shows 90% capacitance retention even after 6000 cycles at 8 A g?1 current density, indicating the material's remarkable stability. The high specific capacitance, excellent energy density, and impressive cycling stability of the hybrid material make it a promising candidate for next-generation supercapacitor electrodes. © 2025 Wiley-VCH GmbH.
Decavanadate-graphene oxide nanocomposite as an electrode material for electrochemical capacitor
(Taylor and Francis Ltd., 2022) Maity, S.; Das, P.P.; Mal, S.
We have synthesized new electrode material for the supercapacitor application. Polyoxovanadates (POVs) have been used for energy storage electrode materials due to their fast multi-electron redox properties. The formation of SDV/GO composites was confirmed using various analytical methods, e.g., Fourier transforms infrared spectroscopy (FTIR) and powder X-ray diffraction (XRD), followed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The composite electrode’s electrochemical behavior was studied using a neutral 1 M sodium sulphate (Na2SO4) solution in three-electrode cyclic voltammetry (CV) system. The SDV/GO composite electrode showed a specific capacitance of 306 F/g for a scan rate of 5 mV/s and a corresponding energy density of 42.4 Wh/Kg. Galvanostatic charge/discharge exhibits a specific capacitance of 310 F/g with energy densities of 43.08 Wh/kg. Electrochemical impedance spectroscopy (EIS), which was used to investigate interface property, yielded a considerably higher power density of 172.41 KW/kg with an equivalent series resistance of 5 ?. © 2021 Informa UK Limited, trading as Taylor & Francis Group.
Dependence of the 0.5 × (2e2/h) conductance plateau on the aspect ratio of InAs quantum point contacts with in-plane side gates
(American Institute of Physics Inc. subs@aip.org, 2017) Das, P.P.; Jones, A.; Cahay, M.; Kalita, S.; Mal, S.S.; Sterin, N.S.; Yadunath, T.R.; Advaitha, M.; Herbert, S.T.
The observation of a 0.5 × (2e2/h) conductance plateau in asymmetrically biased quantum point contacts (QPCs) with in-plane side gates (SGs) has been attributed to the onset of spin-polarized current through these structures. For InAs QPCs with the same width but a longer channel length, there is roughly a fourfold increase in the range of common sweep voltage applied to the SGs over which the 0.5 × (2e2/h) plateau is observed when the QPC aspect ratio (ratio of length over the width of the narrow portion of the structure) is increased by a factor 3. Non-equilibrium Green's function simulations indicate that the increase in the size of the 0.5 × (2e2/h) plateau is due to an increased importance, over a larger range of common sweep voltage, of the effects of electron-electron interactions in QPC devices with a larger aspect ratio. The use of asymmetrically biased QPCs with in-plane SGs and large aspect ratio could therefore pave the way to build robust spin injectors and detectors for the successful implementation of spin field effect transistors. © 2017 Author(s).
Design, fabrication and characterization of 5 ?m ring resonator
(2014) Kollia, V.R.; Yadunath, T.R.; Resmi, R.K.; Hegde, G.; Badrinarayana, T.; Das, P.P.; Srinivas, T.
We present the design, simulation, fabrication and characterization of microring resonator on SOI platform. Proposed feature size device resonates at a wavelength of 1565.92 nm. The fabricated device has potential applications in communication and sensing. � OSA 2016.
Design, fabrication and characterization of 5 Î¼m ring resonator
(Optica Publishing Group (formerly OSA), 2016) Kollia, V.R.; Yadunath, T.R.; Resmi, R.K.; Hegde, G.; Badrinarayana, T.; Das, P.P.; Srinivas, T.
We present the design, simulation, fabrication and characterization of microring resonator on SOI platform. Proposed feature size device resonates at a wavelength of 1565.92 nm. The fabricated device has potential applications in communication and sensing. Â© OSA 2016.
Development of a cholesterol biosensor and energy storage system based on polypyrrole coated polyoxometalate
(Elsevier Ltd, 2025) Biradar, B.R.; Thathron, N.; Hanchate, A.; Das, P.P.; Mal, S.S.
Designing sustainable and environmentally acceptable multifunctional electrode materials is vital for various purposes, such as energy storage and healthcare. The redox property of polyoxometalates is attractive for different electrochemistry fields, such as sensors, energy storage, catalysis, etc. In this study, potassium 9-tungsto-2-molybdo-1-vanadosilicate K5[?-SiMo2VW9O40].10H2O (hereafter acronym as SiMo2VW9) embedded on polypyrrole (PPy), which acts as a nanohybrid, was synthesized for supercapacitor and biosensor applications. The electrochemical analysis for both applications was carried out using cyclic voltammetry, galvanostatic charge-discharge, and electrochemical impedance spectroscopy. The PPy-SiMo2VW9 nanohybrid showed the highest specific capacitance of 174.5 F g?1 with power and energy densities of 799.94 W kg?1 and 15.51 Wh kg?1, respectively, at 0.5 M H2SO4 electrolytic medium. The nanohybrid showed the diffusion-dominant charge storage mechanism with 92.24 % at a 5 mV s?1 scan rate, which refers to the battery-type material. Furthermore, electrochemical sensing for cholesterol was also carried out using the cyclic voltammetry approach in the range of 0.03–0.58 mM cholesterol concentration. The PPy-SiMo2VW9 nanohybrid showed a sensitivity of 7.97 mAm M cm?2 with limit-of-detection (LOD) and limit-of-quantification (LOQ) of 0.06 and 0.2 mM, respectively. The outcomes show that PPy-SiMo2VW9 nanohybrid material is promising in sensing and supercapacitor studies. © 2025 Elsevier B.V.
DFT Calculations for Temperature Stable Quantum Capacitance of VS2 Based Electrodes for Supercapacitors
(Institute of Electrical and Electronics Engineers Inc., 2024) Yadav, A.K.; Shreevathsa, N.S.; Singh, R.; Das, P.P.; Garg, V.; Pandey, S.K.
Using density functional theory calculations, we demonstrate the quantum capacitance of the VS2 electrode which can be improved by doping with non-metallic elements such as nitrogen (N), phosphorus (P), and arsenic (As) atoms. The radius, charge, and morphology of these non-metallic elements help to improve the performance of VS2 material as electrodes of supercapacitors. The As-doped VS2 monolayer demonstrated the maximum quantum capacitance of 31.2369 μF/cm2 at 300 K. At 1200 K, quantum capacitance reaches the value of 25.2149 μF/cm2, showing the inconsiderable change in value for this wide range of temperature variation. Additionally, the other important properties of undoped and doped VS2 monolayers such as density of states, energy band structure, electrical conductivity, thermal conductivity, and the Seebeck coefficient were also computed and examined in detail. The band structure of the P and As-doped VS2 monolayers showed a metallic nature, which is suitable for electrode application. In the case of As-doped VS2 material, a high figure of merit of 3.536 was observed by using DFT-D2 calculations, due to the large Seebeck coefficient and significant electrical conductivity. Our findings will be helpful in further exploring the suitability of VS2 monolayers as electrodes of supercapacitors. © 2002-2012 IEEE.
Dual oxygen reservoir model for nonpolar resistive switching in nickel tetradecavanadate based molecular switch
(Elsevier B.V., 2025) Thathron, N.; Biradar, B.R.; Pandey, S.K.; Mal, S.S.; Das, P.P.
The data explosion and computing limitations of traditional computer systems have led researchers to find alternate data storage devices. Resistive random access memory devices have been accepted as a promising candidate to meet the growing demand for multi-bit memory storage and unconventional computing applications. In this report, we provide a comprehensive mechanistic insight into the multistate nonpolar resistive switching in nickel-embedded polyoxovanadate molecules, K2H5[NiV14O40] based memory device having the architecture Al/K2H5[NiV14O40]/ITO. Such molecular cluster belongs to a larger group of polyoxometalate family. The formation and rupture of multiple conductive filaments made up of oxygen vacancies and their lateral widening with different compliance currents allow the device to exhibit multiple resistance states. The resistance states are likely to be modulated by the multiple redox reactions of Ni and V centers of the active switching layer. The coexistence of two unipolar and two bipolar modes of resistive switching suggests that the device can be modeled as having a dual oxygen reservoir structure where both thermochemical and electrochemical mechanisms of filament theory for resistive switching coexist in the same memory cell. The observation of quantized steps in the conductance plot confirms the conductive filament based resistive switching. The enhancement and reduction in conductance with the increase in the number of pulses can mimic the potentiation and depression in biological synapses. This promises that the polyoxometalate based resistive switching devices can connect memory with neuromorphic applications. © 2025 Elsevier B.V.
Electrochemical performance of activated carbon-supported vanadomolybdates electrodes for energy conversion
(Elsevier Ltd, 2021) Maity, S.; Anandan Vannathan, A.; Kella, T.; Shee, D.; Das, P.P.; Mal, S.
Reinforcing polyoxomolybdates (POMs) into the activated carbon (AC) template engenders a nanohybrid electrode material for high-performance supercapacitor applications. Herein, a first-time novel integration of two polyoxometalates ([PVMo11O40]4-, [PV2Mo10O40]5-) with AC has been demonstrated, and their structural and electrochemical performances were analyzed. AC-VMo11 composite displayed an enhanced capacitance of 450 Fg-1 with an improved energy density of 59.7 Whkg-1. Furthermore, the symmetric supercapacitor cell for AC-VMo11 and AC-V2Mo10 showed high cell capacitances of 38.8 and 20.01 mF, respectively, alongside 99.99% capacitance retention of over 5000 cycles. In addition, the influence of ionic liquid as an electrolyte on AC-V2Mo10 based supercapacitor cell was investigated in tetrabutylammonium bromide (TBAB) electrolyte solution. © 2021 Elsevier Ltd and Techna Group S.r.l.
Enhanced Power Density of Graphene Oxide–Phosphotetradecavanadate Nanohybrid for Supercapacitor Electrode
(Springer, 2021) Maity, S.; Anandan Vannathan, A.A.; Kumar, K.; Das, P.P.; Mal, S.S.
Successful exploration of supercapacitor (SC) material to integrate with high energy and high power density storage device still remains a daunting challenge. Conducting carbon nanostructures have been primarily used for this purpose; however, most of their surface area remains unutilized throughout the storage process. Herein, a new type of hybrid material has been reported by effectively using active sides of carbon nanostructures. Insertion of faradaic-type polyoxometalates (POMs), namely phosphotetradecavanadate (Na7[H2PV14O42], hereafter described as PV14), into the graphene oxide (GO) matrix creates a novel hybrid material for SC applications. Owing to the formation of nanohybrid, it can store charges both electrostatically and electrochemically. PV14/GO composite’s electrochemical behavior in different electrolyte (acidic/neutral) solutions shows different types of characteristics. The PV14/GO composite as a working electrode exhibits a high galvanostatic capacitance of 139 F/g while maintaining at a power density of 97.94 W/kg in 0.25 M H2SO4 electrolyte. The specific energy density was also found out to be around 56.58 Wh/kg at a 5 mV/s scan rate for the same electrolyte. Furthermore, in 1 M Na2SO4 solution, PV14/GO composite demonstrates a specific capacitance of 85.4 F/g at a scan rate of 5 mV/s. The equivalent series resistance for the device was found to be approximately 0.51 ? with a circuit resistance of 3.881 ?, using electrochemical impedance spectroscopy. The cell capacitance, employing the Nyquist plot, was calculated to be around 2.78 mF. © 2021, ASM International.
Fabrication of supercapacitor electrode material using carbon derived from waste printer cartridge
(Springer Science and Business Media Deutschland GmbH, 2024) Biradar, B.R.; Maity, S.; Chandewar, P.R.; Shee, D.; Das, P.P.; Mal, S.S.
Transforming recyclable materials into a suitable product is an important area of research nowadays. This report demonstrates that carbon material derived from waste printer cartridges can be exploited to fabricate electrochemical cells—particularly supercapacitors (SCs). SCs are electrochemical energy storage devices currently attracting much attention in the research community due to their salient features, such as cost-effectiveness, extended cycle stability, and durability. Here, we report the results of thoroughly examining the effects of acidic, basic, and neutral aqueous electrolytes on printer waste carbon electrode material in SC efficiency. In our work, the waste carbon collected from used printer cartridges shows a specific capacitance of 178.4 F/g with energy and power density of 24.77 Wh/kg and 999.68 W/kg, respectively, at 0.5 A/g current density in acidic (1 M H2SO4) electrolyte medium. Moreover, it exhibited very promising capacitance of 135.04 F/g and 87.04 F/g in basic (1 M LiOH) and neutral (1 M NaCl) electrolyte medium, respectively, at 0.8 A/g current density with considerably better cycle stability. In an acidic medium, printer waste carbon drives a DC motor for 1 min with a three-cell series arrangement. The properties of that waste carbon (extracted from the cartridges) are similar to high-rate activated carbon available commercially. Graphical Abstract: (Figure presented.). © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2024.
Graphene-mediated band gap engineering of WO3 nanoparticle and a relook at Tauc equation for band gap evaluation
(Springer Verlag service@springer.de, 2018) Baishya, K.; Ray, J.S.; Dutta, P.; Das, P.P.; Das, S.K.
Engineering the band gap of semiconductors is often crucial in the quest for developing new and advanced technologies. In this report, the implication of graphene on the band gap optimization of tungsten trioxide (WO3) is discussed. Simple one-step sol–gel process was followed to anchor WO3 nanoparticles in graphene. Graphene induces a redshift in the band gap of WO3. Band gap narrowing of 6.60% is observed for 7 wt% graphene-tethered WO3. Interestingly, a profound difference is observed in estimating the band gap energy values following the usual Tauc equation. Our observation suggests that the differential form of Tauc equation is better suited to determine the band gap energy of inorganic semiconductors than the typical extrapolation method. © 2018, Springer-Verlag GmbH Germany, part of Springer Nature.
High areal capacitance polyoxotungstate-reduced graphene oxide-based supercapacitors
(Elsevier B.V., 2023) Biradar, B.R.; Maity, S.; Chandewar, P.R.; Shee, D.; Das, P.P.; Mal, S.S.
The modern lifestyle has driven the advent of high-power electronic gadgets to need high-efficiency energy storage devices. Towards that goal, reduced graphene oxide (rGO) mediated polyoxometalates (POMs) based electrode materials are increasingly showing promising performance for building efficient energy storage devices primarily due to their redox properties. In this report, the silicotungstate [K5[SiVW11O40]. nH2O (SiVW11) embedded rGO nanocomposites as electrode materials in supercapacitor applications were synthesized via chemical and hydrothermal methods. The synthesized nanocomposites were characterized by various techniques, such as Fourier-Transform-Infrared (FTIR) Spectroscopy, Powder X-ray Diffraction (XRD) and Energy Dispersive X-ray Spectroscopy (EDS), Thermogravimetric Analysis (TGA), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET) measurement. The nanocomposite's electrochemical properties were examined by adopting a two-electrode setup with cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD) in a 0.5 M H2SO4 electrolyte medium. The hydrothermally reduced graphene oxide (HrGO) nanocomposite exhibited a noticeable surge in areal capacitance of 377.4 mF/cm2 at a current density of 1.5 mA/cm2. The resulting composite had 52.4 µWh/cm2 and 1500 µW/cm2 as energy and power density, respectively at 1.5 mA/cm2 current density. In addition, the capacitance retention is over 81% after 5000 cycles at a current density of 9 mA/cm2. The highest specific power of 5000 µW/cm2 was obtained at 5 mA/cm2 current density. On the other hand, chemically reduced graphene (CrGO) nanocomposite showed an areal capacitance of 277.2 mF/cm2 at the same current density. As a result, the SiVW11 clusters coupled with the rGO increase the areal capacitance of nanocomposites with exceptional electrical and mechanical stability. From an application standpoint, both composites were employed successfully for running a DC motor in a series cell connection. © 2023 Elsevier B.V.
Highly efficient catalytic reductive degradation of various organic dyes by Au/CeO2-TiO2 nano-hybrid
(Springer India sanjiv.goswami@springer.co.in, 2017) Saikia, P.; Miah, A.T.; Das, P.P.
Highly improved catalytic reductive degradation of different organic dyes, in the presence of excess NaBH4 over Au/CeO2-TiO2 nano-hybrid as the catalyst is reported in this study. CeO2-TiO2 nanocomposite was prepared by a facile co-precipitation method using ultra-high dilute aqueous solutions. Small amount of Au (only 1 wt%) was loaded onto the nanocomposite material by deposition-precipitation with urea (DPU) method to fabricate the ternary Au/CeO2-TiO2 nano-hybrid. The catalysts were characterized by the representative techniques like XRD, BET surface area, ICP-AES, UV-Vis diffuse reflectance spectroscopy, TEM and XPS. The Au/CeO2-TiO2 nano-hybrid along with NaBH4 exhibited remarkable catalytic activities towards all the probed dyes, namely Methylene Blue, Methyl Orange, Congo Red, Rhodamine B and Malachite Green, with a degradation efficiency of ?100% in a short reaction time. The degradation reaction followed pseudo-first-order kinetics with respect to the concentration of the dye. Different parameters that affect the rate of the reaction are discussed. A plausible mechanism for methylene blue degradation has also been proposed. [Figure not available: see fulltext.] © 2017, Indian Academy of Sciences.
Improved electrochemical performance of graphene oxide supported vanadomanganate (IV) nanohybrid electrode material for supercapacitors
(Elsevier Ltd, 2020) Kumari, S.; Maity, S.; Anandan Vannathan, A.A.; Shee, D.; Das, P.P.; Mal, S.S.
Graphene oxide (GO)-supported polyoxometalates (POMs) have been considered as promising electrode materials for energy storage applications due to their ability to undergo fast and reversible redox reactions. Herein, vanadomanganate-GO composites (K7MnIVV13O38.18H2O-GO with 2:1 and 4:1 ratio) were investigated for use as potential electrode materials in supercapacitors (SCs). The K7MnIVV13O38.18H2O (MnV13) was synthesized and anchored on GO through electron transfer interaction and electrostatic interaction to make the composite electrodes for the present study. All synthesized electrode materials were fully characterized by various techniques, e.g., Fourier Transform Infrared (FTIR) Spectroscopy, Powder X-ray Diffraction (XRD), Scanning Electron Microscopy/Energy Dispersive X-ray Spectroscopy (SEM/EDS) and High Resolution-Transmission Electron Microscopy (HR-TEM). The electrochemical properties of MnV13/GO composites with different MnV13/GO ratios were investigated by two-electrode cyclic voltammetry (CV) and galvanostatic charge/discharge (GCD) in different electrolytes. The MnV13/GO composite of ratio 2:1 in 1 M LiCl electrolyte and that of ratio 4:1 in 1 M Na2SO4 electrolyte showed significant specific capacitance values of 269.15 F/g and 387.02 F/g, respectively and energy density of 37.38 Wh/kg and 53.75 Wh/kg, respectively for a scan rate of 5 mV/s. Interestingly, the 1:1 (MnV13/GO) composite in 1 M Na2SO4 and 1 M LiCl electrolytes showed very low specific capacitance values as the deposition of MnV13 on GO was not sufficient, as indicated by FTIR and SEM. Thus, it is evident that the specific capacitance value of these composite materials depends on the amount of MnV13 deposited on GO and these composite materials exhibit the potential to improve the performance of GO-based SCs. © 2019
In situ vanadophosphomolybdate impregnated into conducting polypyrrole for supercapacitor
(Elsevier Ltd, 2020) Anandan Vannathan, A.A.; Maity, S.; Kella, T.; Shee, D.; Das, P.P.; Mal, S.S.
The fast modernization and advancement in lifestyle increase the consumption of power daily due to all innovative technologies, e.g., hybrid vehicles, solar cells, smart power grid, communication devices, artificial hearts, etc. Conducting organic polymer-based energy storage devices had attracted much attention due to the conductive nature for a long time. However, its application has been restricted because of swelling and shrinking capability during the charge and discharge cycle. The combination of redox-active inorganic metal oxides, such as polyoxometalates (multi-metal oxide cluster) with conduction polymers, could enhance the material's stability due to its fast multi-electron redox property. Here, we report the two polypyrroles combined vanadophosphomolybdates, namely PPy-H4[PVMo11O40] and PPy-H5[PV2Mo10O40] nanohybrid electrode materials. The PPy-H5[PV2Mo10O40] electrode material behaves as pseudocapacitance and can deliver an excellent capacitance of 561.1 F/g in 0.1 M H2SO4 electrolyte solution at a 0.2 A/g current density, indicating capacitive composite material. The electrochemical impedance spectroscopy (EIS) reveals that PPy-H5[PV2Mo10O40] is more capacitive than PPy-H4[PVMo11O40] and PPy with equivalent series resistance (ESR) of 5.74 ?. The cell capacitance of PPy-H5[PV2Mo10O40] and PPy-H4[PVMo11O40] are found to be 5.38 and 9.15 mF, stipulating in small SC cell application. Likewise, the PPy-H5[PV2Mo10O40] nanohybrid electrode shows better responsive behavior with a relaxation time of 0.16 ms. Furthermore, the PPy-H5[PV2Mo10O40] electrode exhibits outstanding cycle stability, retaining ~95% of its capacitance after 4500 cycles as compare to PPy-H4[PVMo11O40] (~91%) electrode. © 2020
Integrated optics-based quantum communication devices
(2017) Ramakrishnan, R.K.; Samad, S.A.; Archana, K.; Yadunath, T.R.; Das, P.P.; Talabattula, S.
Quantum communication or more specifically quantum information processing is considered as the future of information science and technology. In this paper we propose a scheme to implement quantum communication at the device level using integrated optics. We implement the quantum communication protocol BB84, in a waveguide based circuit using integrated optics. We also propose a high dimensional quantum key distribution method implementation using integrated optics. In the earlier one polarized photons are used as the carriers of quantum information, while in second one electromagnetic modes in the waveguide are used to carry quantum information. The high dimensional quantum communication method is used to increase the information content of protocol thus increasing on the data rates. This is done by encoding into a larger state space. We have used electromagnetic modes for encoding since the polarization method is not efficient to carry information in a larger state space. � 2017 SPIE.
Integrated optics-based quantum communication devices
(SPIE spie@spie.org, 2017) Ramakrishnan, R.K.; Samad, S.A.; Archana, K.; Yadunath, T.R.; Das, P.P.; Srinivas, T.
Quantum communication or more specifically quantum information processing is considered as the future of information science and technology. In this paper we propose a scheme to implement quantum communication at the device level using integrated optics. We implement the quantum communication protocol BB84, in a waveguide based circuit using integrated optics. We also propose a high dimensional quantum key distribution method implementation using integrated optics. In the earlier one polarized photons are used as the carriers of quantum information, while in second one electromagnetic modes in the waveguide are used to carry quantum information. The high dimensional quantum communication method is used to increase the information content of protocol thus increasing on the data rates. This is done by encoding into a larger state space. We have used electromagnetic modes for encoding since the polarization method is not efficient to carry information in a larger state space. Â© 2017 SPIE.