Browsing by Author "Chavan, S."

Now showing 1 - 17 of 17

A review on thermal energy storage using composite phase change materials
(Bentham Science Publishers, 2018) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
Background: This paper intends to provide the elementary understanding about the development of thermal energy storage systems. Reviews of storage system performance are carried out from various characterization studies, experimental work, numerical investigations and patents. Several techniques employed to enhance the thermal performance have been reviewed and discussed. Composite phase change materials are the best alternative to achieve the cost feasibility in thermal energy storage systems without compromising the storage capacity. Objective: The purpose of this study is to give an outline and history of the thermal energy storage systems and enlighten the techniques used for storage density enhancement without significant modifications in the design. Methods: In this study, three methods such as, characterization studies, experimental work, numerical investigations and patents. It also addresses many research articles and recent patents on the thermal storage systems, various techniques adopted and applications of such systems. Results: Composite phase change materials are the best alternative to achieve the cost feasibility in thermal energy storage systems without compromising the storage capacity. Carbon based nanoparticles show excellent properties in the composite phase change materials. Conclusion: Composite phase change materials have greater potential for thermal energy storage applications and especially carbon-based nanoparticles like graphene, graphene oxide, carbon nanotubes, fullerene, graphite, graphite oxide, extracted graphite etc., are greatly enhancing the thermo-physical properties of composite phase change materials. Combination of paraffin-based phase change materials and carbon-based nanoparticles can be used for the future thermal energy storage applications. © 2018 Bentham Science Publishers.
A review on thermal energy storage using composite phase change materials
(Bentham Science Publishers, 2018) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
Background: This paper intends to provide the elementary understanding about the development of thermal energy storage systems. Reviews of storage system performance are carried out from various characterization studies, experimental work, numerical investigations and patents. Several techniques employed to enhance the thermal performance have been reviewed and discussed. Composite phase change materials are the best alternative to achieve the cost feasibility in thermal energy storage systems without compromising the storage capacity. Objective: The purpose of this study is to give an outline and history of the thermal energy storage systems and enlighten the techniques used for storage density enhancement without significant modifications in the design. Methods: In this study, three methods such as, characterization studies, experimental work, numerical investigations and patents. It also addresses many research articles and recent patents on the thermal storage systems, various techniques adopted and applications of such systems. Results: Composite phase change materials are the best alternative to achieve the cost feasibility in thermal energy storage systems without compromising the storage capacity. Carbon based nanoparticles show excellent properties in the composite phase change materials. Conclusion: Composite phase change materials have greater potential for thermal energy storage applications and especially carbon-based nanoparticles like graphene, graphene oxide, carbon nanotubes, fullerene, graphite, graphite oxide, extracted graphite etc., are greatly enhancing the thermo-physical properties of composite phase change materials. Combination of paraffin-based phase change materials and carbon-based nanoparticles can be used for the future thermal energy storage applications. Â© 2018 Bentham Science Publishers.
Characterization of linear low-density polyethylene with graphene as thermal energy storage material
(Institute of Physics Publishing helen.craven@iop.org, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
In this work authors reported the preparation and characterization of composite phase change material (CPCM) using the direct-synthesis method by blending the Linear low-density polyethylene (LLDPE) with Carboxyl Functionalized Graphene (f-Gr). LLDPE is selected as base material and f-Gr is dispersed into three different concentrations 1.0, 3.0, and 5.0 wt% and referred as CPCM-1, CPCM-2 and CPCM-3 respectively. Experimental analysis is carried out through Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM) and Differential scanning calorimeter (DSC). The preset study assesses the influences of nanoparticle concentration on thermophysical properties, thermal performance and thermal storage characteristics of CPCMs. Results show that addition of f-Gr improves the thermal conductivity and latent heat of fusion of LLDPE. However, f-Gr slightly reduces the melting temperature and decreased the crystallization temperature. Therefore, this study reveals that f-Gr, addition to LLDPE has substantial potential for improving the thermal energy storage performance. © 2019 IOP Publishing Ltd.
Computational investigation of bounded domain with different orientations using CPCM
(Elsevier Ltd, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
The present work deals with the composite phase change material (CPCM) of 98% paraffin wax and 2% copper nanoparticle, filled into the bounded domain. Effects of orientation (45° 90° 135° and 180°) with different wall heating conditions (base, left and top wall) are analyzed numerically to understand the flow patterns and interface morphology developed during melting/solidification processes. The melting/solidification mechanism exhibited non-uniform flow patterns and irregular morphology which are dependent on geometrical orientations and different wall heating conditions. The results revealed that the bounded domain with different orientations have significant effect on natural convection current formation. As the orientation changes, the heat transfer rate gets influenced significantly and convection currents amplifies. Top wall heating arrangement of 180° orientation shows competence in achieving better thermal performance. © 2019 Elsevier Ltd
Computational investigation on the effect of geometrical parameters on thermal energy storage systems
(Begell House Inc., 2021) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.
The present work is an attempt to understand the effect of geometry on the heating and cooling characteristics of thermal energy storage systems. Three different geometrical models (square, pentagon, and hexagon) were considered and the thermal storage material used was a composite of paraffin wax (98%) and Al2O3 nanoparticles (2%). The heating and cooling processes were analyzed by applying a constant heat flux. Among the three models, the square model showed a faster melting rate but the cooling rate was too steep. The hexagonal model showed optimum results in both the heating and cooling processes with uniform and smooth variations in the liquid fraction and temperature. Hence, for optimal thermal storage applications the hexagonal model (or its geometries), which is close to the circular model, can be considered. © 2021 by Begell House, Inc.
Cooling packing and cold energy storage
(Elsevier, 2023) Chavan, S.; Manickam, M.; Arumuga Perumal, A.P.; Gumtapure, V.
This chapter is divided into two parts: first part discusses about cooling packing applications of phase change materials, and second part discusses about cold thermal energy storage application of PCM. Consequently, methods of thermal energy storage are briefly explained, specifically for cooling packing applications along with present challenges of the technology. The second part of the chapter discusses in brief about cold thermal energy storage specifically basic working principle, loading of cold thermal energy storage for operational purposes CTES in selecting and characterizing storage media, water versus ice thermal energy storage, PCM used for cold thermal storage, advantages, disadvantages, and finally, battery thermal management system in electric vehicle are discussed in brief with updated knowledge in the field of real-time application. © 2023 Elsevier Ltd. All rights reserved.
Effect of geometry on heating and cooling characteristics for thermal energy storage-A Computational Study
(Toronto Metropolitan University, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
In the present work an attempt is made to understand the effect of geometry on heating and cooling characteristics for thermal energy storage applications. Three different geometrical models (square, pentagon and hexagon) are selected and thermal storage material used is composite of paraffin wax (98%) and Al2O3 nanoparticles (2%) [1-2]. The heating and cooling processes are analyzed by applying constant heat flux and the boundary conditions imposed are: Heating cycle (i) Constant heat flux is applied to left wall (for square) and upper left wall (for pentagon and hexagon). Cooling cycle (ii) Constant heat rejection through right wall (for square) and lower right wall (pentagon and hexagon). (iii) Remaining all other walls are Insulated for both the cases. The geometrical 2-D model is created by using ICEMCFD16.0 pre-processing software of ANSYS 16.0 version, in order to interpret the superior results good quality mesh is generated all over the computational domain. At the boundaries, the mesh size is reduced and made a uniform to response imposition of inputs and resolve the boundary layer conflicts. In order to reduce the computational time, relatively larger mesh is maintained at the center part of the domain. To investigate the problem Fluent 16.0 is used and concerned parameters are defined, boundary conditions are imposed and temperature dependent user-defined functions (UDF) are interpreted. The numerical investigation aims to understand the effect of geometry on heating and cooling characteristics using composite phase change material. The streamline patterns, liquid fractions and temperature distribution profiles are analyzed and among the models square and hexagonal model shown quicker melting (completed melting within 4000 sec). The liquid fraction variation is also similar and uniform, the temperature variation during complete melting process is least in square model followed by pentagonal model. However, liquid fraction variation is least in pentagonal model. Temperature variation during heating is maximum in case of hexagonal model (14%) increase in temperature. Liquid fraction variation is uniform and smooth in hexagonal model and consumed 50% less time than pentagonal model. The cooling cycle analysis also explored some interesting results, cooling rate is very quick in square model but for optimal thermal storage unit heat rejection process should not be too steep. Pentagonal model shown insignificant characteristics during both heating and cooling processes. The hexagonal model exhibited uniform and gradual variation in liquid fraction as well as temperature variation during the process. For ideal thermal storage device quicker heating is expected and heat rejection should be gradual and relatively slower (specially for long term storage applications). Among all the cases if only heating is required then square model will be the best selection but to achieve optimal heating and cooling hexagonal model will be the best option. Â© 2019, Toronto Metropolitan University. All rights reserved.
Numerical and experimental analysis on thermal energy storage of polyethylene/functionalized graphene composite phase change materials
(Elsevier Ltd, 2020) Chavan, S.; Gumtapure, V.; Arumuga Perumal, A.P.
The main driving force behind the present work is environmental issues caused due to the usage of plastics, and energy issues. Current work attempts to address these problems by converting recycled plastics into thermal storage materials (TSM). Unfavorable thermophysical properties of plastic make it impractical but these inadequacies can be amended by blending with additives of superior thermophysical properties like, functionalized graphene. Numerical and experimental analysis are carried out to assess the thermal performance of TSMs (LLDPE, CPCM-1, CPCM-2 and CPCM-3) and check the compatibility of the materials. The phase change temperature of TSM is 123 to 125 °C and heat of fusion is 71.95 to 97 kJ/kg. Several thermal characteristics are analyzed to assess thermal performance and the amount of heat energy supplied, rate of heat transfer, and heat storage efficiency are deliberated. Results shown energy level enhancement of 43.17, 50.42, 54 and 50.61% for LLDPE, CPCM-1, CPCM-2 and CPCM-3 respectively. Among the TSM CPCM-2 shows relatively better storage capability (54% enhancement) due to incorporation of optimum concentration of enhancing material. The solidification process takes place through convection and radiation mode of heat transfer, at the completion of solidification process the TSM energy content reduces to 97.5, 96, 96 and 96% for LLDPE, CPCM-1,CPCM-2 and CPCM-3 respectively. This work concludes that, recycled plastics can be blended and it can be converted into efficient thermal storage material. © 2019 Elsevier Ltd
Numerical Studies for Charging and Discharging Characteristics of Composite Phase Change Material in A Deep and Shallow Rectangular Enclosure
(2018) Chavan, S.; Arumuga, Perumal, D.; Gumtapure, V.
In this study, a numerical analysis of the melting process with natural convection in a rectangular enclosure has been performed using enthalpy porosity model. A Composite phase change material (Paraffin wax (98%) is used as base material and copper nanoparticles (2%) as additives) is used. The enclosure is heated from one side and opposite side is isothermal at 300 K, and remaining walls are thermally insulated. Melting heat transfer in a rectangular enclosure with different orientations are investigated numerically. The flow field results in nonuniform melting of the composite phase change material (CPCM). The interface morphology is used to infer flow structure and the extent of two-dimensional energy transport. These flow patterns are found to be dependent on the orientation and the initial CPCM sub-cooling. The results reveal that the enclosure orientation has a significant effect on the formation of natural convection currents and consequently on the heat transfer rate and melting time of the CPCM. As the orientation changed from deep to shallow, the convection currents in the enclosure, increases and chaotic flow structure appear. Hence, it can be concluded that the heat transfer enhancement ratio for the deep enclosure is more than that of the shallow enclosure. � Published under licence by IOP Publishing Ltd.
Numerical Studies for Charging and Discharging Characteristics of Composite Phase Change Material in A Deep and Shallow Rectangular Enclosure
(Institute of Physics Publishing helen.craven@iop.org, 2018) Chavan, S.; Arumuga Perumal, D.A.; Gumtapure, V.
In this study, a numerical analysis of the melting process with natural convection in a rectangular enclosure has been performed using enthalpy porosity model. A Composite phase change material (Paraffin wax (98%) is used as base material and copper nanoparticles (2%) as additives) is used. The enclosure is heated from one side and opposite side is isothermal at 300 K, and remaining walls are thermally insulated. Melting heat transfer in a rectangular enclosure with different orientations are investigated numerically. The flow field results in nonuniform melting of the composite phase change material (CPCM). The interface morphology is used to infer flow structure and the extent of two-dimensional energy transport. These flow patterns are found to be dependent on the orientation and the initial CPCM sub-cooling. The results reveal that the enclosure orientation has a significant effect on the formation of natural convection currents and consequently on the heat transfer rate and melting time of the CPCM. As the orientation changed from deep to shallow, the convection currents in the enclosure, increases and chaotic flow structure appear. Hence, it can be concluded that the heat transfer enhancement ratio for the deep enclosure is more than that of the shallow enclosure. Â© Published under licence by IOP Publishing Ltd.
Performance assessment of composite phase change materials for thermal energy storage-characterization and simulation studies
(Bentham Science Publishers, 2021) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.
Background: The present study mainly focuses on the development of new Thermal Storage Materials (TSM) and compare the performance for thermal energy storage capacity. Linear Low-Density Polyethylene (LLDPE) based Composite Phase Change Materials (CPCMs) is prepared, and its properties are analyzed using characterization, analytical calculations, and numerical simulation meth-ods. The composites are prepared by blending the functionalized graphene nanoparticles (1, 3 & 5%) with three different concentrations into LLDPE. All three CPCMs show enhanced thermal performance compared to the base material, but it is noticed that higher concentrations of nanoparticles increase the dynamic viscosity and produce an adverse effect on thermal performance. Thermal characterization shows improved latent heat capacity with nanoparticle concentration, analytical and numerical results also compared, which shown a difference of 10 to 25%. Objective: The purpose of this study is the development and evaluation of the thermal storage capacity of different thermal storage materials and enlighten the techniques used for characterizing the storage materials. Methods: Composite material preparation is carried out by using twin-screw extruders, characterization of developed material is done through FTIR, SEM, and DSC analysis. For complete analysis character-ization, analytical calculations and numerical simulation methods are used. Results: Linear low-density polyethylene-based composite materials can be successfully developed using a twin-screw extruder. This extrusion provided proper dispersion of nanoparticles into the base material, and it is validated by SEM analysis. DSC analysis confirmed the enhancement in the thermo-physical properties of composite materials. Conclusion: The latent heat capacity increased around 20% during the heating cycle and reduced ap-proximately 23% during the cooling cycle for base material and 5% addition of nanoparticle, respec-tively. The comprehensive study accomplishes that the optimum concentration of nanoparticle provides better thermal performance for thermal energy storage applications. © 2021 Bentham Science Publishers.
Phase change materials in chemical and process engineering
(Elsevier, 2023) Chavan, S.; Manickam, M.; Arumuga Perumal, A.P.; Gumtapure, V.
This chapter is concerned with phase change materials in chemical and process engineering. Industrial waste heat recovery is explored as a source of heating and cooling with the application of phase change materials, which is well known. Consequently, heat transformation technologies are presented in detail along with their technical and economic potentials. Initially, utilization of phase change materials in process industries is discussed, which covers on-site and off-site industrial applications. The concept of on-site and off-site thermal energy utilization is well defined. The large amount of industrial waste heat is generated, which can be stored in the phase change materials, and it can be transported to the place where there is energy requirement in particular. Industries such as metal manufacturing, nonmetal manufacturing, chemicals and chemical products, pulp, and food processing industries are the main focuses of the present study. All the technical aspects are discussed in detail with respect to the future scope of phase change materials with thermal energy storage systems. Thermal energy utilization using phase change materials for chemical process industries also has great potentiality for various applications such as thermal fluid heating systems, gas-fired systems, and solar heating systems, which are also discussed. A comprehensive study has been carried out for potential usage of phase change materials for various manufacturing and process engineering applications. © 2023 Elsevier Ltd. All rights reserved.
Piezoelectric property investigation on PVDF/ZrO2/ZnO nanocomposite for energy harvesting application
(IOP Publishing Ltd, 2021) Naik, R.; Mohith, S.; Chavan, S.
Recent days, considerable research efforts have been emphasized on the development of lightweight, portable, shock resistance, and flexible wearable devices that are powered by harvesting energy from abundant mechanical forces or vibrational energy. In this paper, we report piezoelectric nanogenerator (PNG) based on poly (vinylidene fluoride) (PVDF)/Zirconium oxide (ZrO2)/Zinc oxide (ZnO) nanocomposite. The addition of nanofillers significantly affects the structural property of PVDF, and their addition helps in the improvement of the piezoelectric property. The PNGs are fabricated and tested under various stress conditions (at different loads, tapping and walking). The hybrid PVDF/5% ZrO2/5%ZnO nanogenerator showed a maximum peak to peak voltage (Vpp) of 3.2 V, which is nearly eight times more than pristine PVDF nanogenerator. A prototype of shoe pad nanogenerator is demonstrated as an application. © 2021 IOP Publishing Ltd. © International Journal of Extreme Manufacturing.
Preparation and characterization of nanoparticle blended polymers for thermal energy storage applications
(2019) Chavan, S.; Gumtapure, V.; Perumal, D.A.
This paper is concerned with the comprehensive procedure of preparing, morphological characterization and thermal property evaluation of nanoparticle blended polymer composites. Polymer composites are intended to consecrate the thermal energy storage applications. Linear low-density polyethylene (LLDPE) is incorporated with functionalized graphene with different concentrations (1, 3 and 5%). The morphological study revealed compatibility of polymer composites, at lower concentrations (1-3%,) it shows homogenous dispersion, but above threshold limit the particle distribution is non-homogenous with coarse surface structures. Higher concentration (5%) of nanoparticles emulsifies the molecules and generates micelles between themselves. The thermal conductivity of the polymer composite is significantly enhanced with the reduction of specific heat. At lower concentrations polymer exhibits homogeneous dispersion and the interfacial interaction is comparatively higher, optimal concentration (3%,) of nanoparticle provides favorable results and hence polymer composites with ideal concentration can be utilized for thermal energy storage applications. � 2018 Author(s).
Preparation and characterization of nanoparticle blended polymers for thermal energy storage applications
(American Institute of Physics Inc. subs@aip.org, 2019) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
This paper is concerned with the comprehensive procedure of preparing, morphological characterization and thermal property evaluation of nanoparticle blended polymer composites. Polymer composites are intended to consecrate the thermal energy storage applications. Linear low-density polyethylene (LLDPE) is incorporated with functionalized graphene with different concentrations (1, 3 and 5%). The morphological study revealed compatibility of polymer composites, at lower concentrations (1-3%,) it shows homogenous dispersion, but above threshold limit the particle distribution is non-homogenous with coarse surface structures. Higher concentration (5%) of nanoparticles emulsifies the molecules and generates micelles between themselves. The thermal conductivity of the polymer composite is significantly enhanced with the reduction of specific heat. At lower concentrations polymer exhibits homogeneous dispersion and the interfacial interaction is comparatively higher, optimal concentration (3%,) of nanoparticle provides favorable results and hence polymer composites with ideal concentration can be utilized for thermal energy storage applications. Â© 2018 Author(s).
Preparation of functionalized graphene-linear low-density polyethylene composites by melt mixing method
(American Institute of Physics Inc. subs@aip.org, 2020) Chavan, S.; Gumtapure, V.; Arumuga Perumal, D.A.
Graphene is attracting gigantic amount of scientific interest due to its excellent thermo-physical properties. Graphene integration improves the electrical and mechanical properties of polyethylene-based polymers. This paper is concerned with the comprehensive procedure of preparing, morphological characterization and thermal property evaluation of nanoparticle blended polymer composites. Polymer composites are intended to consecrate the thermal energy storage applications. Linear low-density polyethylene (LLDPE) is incorporated with functionalized graphene with different concentrations (1, 3 and 5%). The morphological study revealed compatibility of polymer composites, at lower concentrations (1-3%) it shows homogenous dispersion, but above threshold limit the particle distribution is non-homogenous with coarse surface structures. Higher concentration (5%) of nanoparticles emulsifies the molecules and generates micelles between themselves. The thermal conductivity of the polymer composite is significantly enhanced with the reduction of specific heat. At lower concentrations polymer exhibits homogeneous dispersion and the interfacial interaction is comparatively higher, optimal concentration (3%) of nanoparticle provides favorable results and hence polymer composites with ideal concentration can be utilized for thermal energy storage applications. Â© 2020 Author(s).
Taskgraph Framework: A Competitive Alternative to the OpenMP Thread Model
(Institute of Electrical and Electronics Engineers Inc., 2025) Chavan, S.; Nile, P.; Kumar, S.; Bhowmik, B.
OpenMP is the predominant standard for shared memory systems in high-performance computing (HPC), offering a tasking paradigm for parallelism. However, existing OpenMP implementations, like GCC and LLVM, face computational limitations that hinder performance, especially for large-scale tasks. This paper presents the Taskgraph framework, a novel solution that overcomes the limitations of traditional task dependency graphs (TDGs). Unlike conventional TDGs, which require costly reconstruction for dynamic program structures, the Taskgraph framework uses a taskgraph clause with a list of variables, enabling real-time adaptation without complete reconstruction. This approach significantly reduces overhead, making the Task-graph model highly efficient for tasks with minimal dependencies, offering a competitive alternative to the OpenMP thread model, and enhancing efficiency and adaptability in dynamic HPC environments. Â© 2025 IEEE.